China Good quality Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas mini air compressor

Product Description

Detailed Photos

Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas

Description&Advantages

Product Descriptions:

The gas station, which takes natural gas input through pipelines, increases the pressure on-site and then either directly fills or stores the gas in fixed storage cylinder groups (wells) for refueling CNG vehicles with CNG. The process system consists of a pressure regulation and metering device, desulfurization and dehydration equipment, a natural gas compressor, CNG storage facilities, a sequential control device, CNG refueling facilities, safety protection devices for refueling process equipment, electrical devices, CNG pipelines and components, etc

Advantages:
Our products, incorporating technology from Austria’s LMF and Germany’s CHINAMFG Demag companies, exhibit high reliability. Wearable parts like gas valves and piston rings use products from Austria’s Hoerbiger company, with a lifespan exceeding 8000 hours. The system supports soft starting, allowing frequent start and stop cycles for the compressor.  It features a wide intake range for broad adaptability. The overall skid-mounted structure results in low noise and is easy to install in urban areas, leading to investment savings.
It is equipped with a CHINAMFG PLC control system for high automation, ABB soft start (or variable frequency), and features automatic shutdown with audible and visual alarms in case of faults

Product Parameters

 

Model Inlet Pressure
(Mpa)
Outlet Pressure
(Mpa)
Capacity
(Nm3/h)
Power
(Kw)
Remarks
ZF-0.16/6-250 0.6 25 68 22  
VF-2.4/8-250 0.8 25 1300 220  
VF-0.76/10-250 1.0 25 500 Q6135DR1  
VF-2.2/10-250 1.0 25 1452 220-8  
VF-3.2/(2.5-4)-250 0.25-0.4 25 670-1000 270  
VF-2/(10-16)-250 1.0-1.6 25 1320-2000 280  
VF-2.5/3-210 0.3 21 600 132  
VF-0.11/(70-200)-250 7-20 25 468-1326 30  
VF-2.5/(0.8-1.6)-250 0.08-0.16 25 270-390 90  
VF-2/(2-3)-250 0.2-0.3 25 360-480 110  
VF-1.1/(5-6)-250 0.5-0.6 25 396-462 90  
VF-0.54/30-250 3.0 25 1004 110  
VF-0.8/30-250 3.0 25 1488 160  
VF-0.28/(40-80)-250 4.0-8.0 25 688-1360 90  
VFD-0.36/(20-200)-250 2.0-20 25 680-2210 110 Soundproof Cabin
VFD-0.32/(20-200)-250 2.0-20 25 600-1700 90 Soundproof Cabin
VFD-0.28/(20-200)-250 2.0-20 25 525-1430 75 Soundproof Cabin
VFD-0.16/(20-200)-250 2.0-20 25 600 55 Soundproof Cabin
Note: This series of CNG refueling station compressors can be customized with the following parameters: Pressure: 0.2-20Mpa, Flow rate: 400-1200 Nm³/h.

Our Factory

 

Part of Customer Visit

 

Certifications & Testing

 

Related Product

 

FAQ

Q:Are you a factory?

A:Yes, we are indeed a factory. We specialize in manufacturing high-quality Air/Gas Compressors and are proud to be a primary source for these products.

Q:How long is your delivery time?
A:It varies depending on the specific situation. For our standard configuration compressors, the delivery time is around 30 days. For customized compressors, it usually takes about 30-45 days.

Q:What technical support do you offer?
A:We offer comprehensive technical support to our clients, including remote assistance for installation and commissioning processes. Additionally, we have a team of seasoned engineers ready to be deployed to international client locations for meticulous on-site debugging, installation, and post-installation services.

Q:What is your warranty period?
A:Our warranty policy is valid for a period of 18 months from the date of commissioning at the end customer’s site or 21 months from the date of receipt by the purchaser, whichever comes first. This comprehensive coverage is designed to ensure total customer satisfaction and the reliability of our products

Q:How do you package the compressors?
A:For smaller compressors, we utilize robust plywood boxes that conform to export specifications.
    For the larger units, we strategically place them in freight containers, implementing secure fastening methods to safeguard            against any potential damage during the shipping process.

Q:What are your payment terms?
A:Usually, the payment is made by T/T with a 30% down payment CHINAMFG confirmation of the Proforma Invoice (PI), and the balance is to be paid after inspection and before shipment. We accept both TT and L/C at sight.

Send message  Get product Offer & Brochure!!!

 ↓↓↓

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Local Teams
Warranty: 18 Mouths
Principle: Reciprocating Compressor
Application: Back Pressure Type, Intermediate Back Pressure Type, High Back Pressure Type, Low Back Pressure Type
Performance: Low Noise, Variable Frequency, Explosion-Proof
Mute: Mute
Samples:
US$ 40000/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

What Is the Efficiency of Screw Compressors?

The efficiency of screw compressors can vary depending on various factors, including the design, operating conditions, and maintenance. Here’s a detailed explanation of the efficiency of screw compressors:

1. Isothermal Efficiency:

Isothermal efficiency refers to the ideal efficiency of a compressor operating under isothermal conditions. In reality, screw compressors experience temperature rise during compression, and therefore, they do not achieve isothermal efficiency. The compression process in screw compressors is considered to be relatively close to isothermal compared to other compressor types, such as reciprocating compressors. This is due to the continuous and smooth flow of air or gas through the compression chamber, which helps in minimizing temperature differences.

2. Adiabatic Efficiency:

Adiabatic efficiency refers to the actual efficiency of a compressor, taking into account the heat generated during compression. Screw compressors typically have higher adiabatic efficiency compared to reciprocating compressors. The helical design of the rotors and the presence of intermeshing lobes allow for efficient compression with minimal energy loss. The adiabatic efficiency of a screw compressor can be influenced by factors such as the compression ratio, rotational speed, and discharge pressure.

3. Overall Efficiency:

The overall efficiency of a screw compressor takes into account various factors, including mechanical losses, power consumption, and auxiliary power requirements. Mechanical losses can occur due to friction between the rotors, bearings, and other moving parts. Well-maintained screw compressors with properly lubricated components and well-aligned rotors can minimize mechanical losses and improve overall efficiency. Power consumption is another factor affecting efficiency, and it can vary depending on the size, design, and operating conditions of the compressor.

4. Energy Efficiency:

Energy efficiency is an important aspect of screw compressors. It relates to the ability of the compressor to convert electrical energy into compressed air with minimal energy waste. Energy-efficient screw compressors are designed to optimize the compression process, reduce power consumption, and maximize output for a given input. Variable Speed Drive (VSD) screw compressors, for example, can adjust the rotational speed to match the compressed air demand, resulting in improved energy efficiency and significant energy savings.

It’s important to note that the efficiency of screw compressors can vary depending on the specific model, design features, and operating conditions. Regular maintenance, including proper lubrication, cleaning, and component inspection, is crucial for maintaining high efficiency levels. Additionally, selecting the right size and type of screw compressor for the intended application is essential to achieve optimal efficiency and performance.

In summary, screw compressors are known for their relatively high efficiency compared to other compressor types. While they may not achieve perfect isothermal efficiency, their adiabatic efficiency, overall efficiency, and energy efficiency make them suitable for a wide range of industrial applications.

China Good quality Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas   mini air compressorChina Good quality Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas   mini air compressor
editor by CX 2024-02-26

Leave a Reply

Your email address will not be published. Required fields are marked *