China Hot selling etc Oil Free Non-Lubricated Rotary Screw Air Compressor Ke90-08et (INV) air compressor repair near me

Product Description

The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.

When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!

Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.

 

Features of CHINAMFG ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request

2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference CHINAMFG

3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions
7. Reliable automatic control box with “Siemens” contactors
8. High efficiency aftercooler (air- or water- cooled available)

Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air. 

The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment. 

Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential. 

ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CHINAMFG follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CHINAMFG can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!

 

CONTACT US

Asia Pacific Market: Spencer Lau (Ms.)

European/ Middle Eastern/ African Market: Echo Lok (Ms.)

American Market: Alice Kwok (Ms.)
 

 
     

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: Yes
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Customization:
Available

|

air compressor

Are There Oil-Free Screw Compressors Available?

Yes, oil-free screw compressors are available in the market to cater to applications where oil contamination is a concern. Here’s a detailed explanation:

Oil-free screw compressors, as the name suggests, are designed to operate without the use of lubricating oil in the compression chamber. These compressors offer several advantages in industries where oil-free compressed air or gas is required, such as in food and beverage, pharmaceutical, electronics, and certain manufacturing processes.

The key features and considerations of oil-free screw compressors include:

  • 1. Specialized Design: Oil-free screw compressors are designed with specialized materials, coatings, and sealing systems to eliminate the need for lubricating oil in the compression process. The rotors and other internal components are constructed to ensure minimal friction and wear, even in the absence of oil.
  • 2. Dry Compression: Unlike lubricated screw compressors, oil-free screw compressors rely on dry compression methods. The compression chamber is designed to achieve compression without the presence of oil, ensuring that the discharged air or gas is free from oil contaminants. This is particularly critical in industries where oil contamination can have detrimental effects on product quality or equipment performance.
  • 3. Sealing Technology: Oil-free screw compressors employ advanced sealing technologies to prevent air or gas leakage between the high-pressure and low-pressure sides of the compressor. These sealing systems ensure efficient compression while maintaining the required clearances between the rotors and the compressor housing.
  • 4. Cooling Systems: Oil-free screw compressors utilize alternative cooling methods, such as air or water cooling, to dissipate the heat generated during compression. Efficient cooling is crucial to prevent overheating and ensure reliable operation.
  • 5. Filtration Systems: Oil-free compressors often incorporate high-quality filtration systems to remove particulates, moisture, and other contaminants from the incoming air or gas. These filtration systems help maintain the integrity of the compressor and ensure the delivery of clean, oil-free compressed air or gas.
  • 6. Application-Specific Solutions: Oil-free screw compressors are available in various sizes and configurations to meet specific application requirements. They can be tailored to deliver the desired air or gas flow rates, pressures, and purity levels.

It’s important to note that oil-free screw compressors generally have higher initial costs compared to lubricated compressors due to their specialized design and materials. However, they offer benefits such as reduced maintenance, minimized risk of oil contamination, and compliance with stringent industry standards or regulations.

When considering an oil-free screw compressor, it’s crucial to assess the specific application needs, air quality requirements, and operating conditions. Consulting with manufacturers or suppliers can help in selecting the most suitable oil-free screw compressor for a particular industry or process.

In summary, oil-free screw compressors are available and offer a reliable and efficient solution for applications where oil-free compressed air or gas is essential. These compressors are designed with specialized features to ensure dry compression, reliable sealing, effective cooling, and high-quality filtration.

air compressor

What Is the Impact of Ambient Temperature on Screw Compressor Performance?

Ambient temperature has a significant impact on the performance of screw compressors. Here’s a detailed explanation:

Screw compressors, like other types of compressors, rely on the surrounding environment to dissipate heat and maintain optimal operating conditions. The ambient temperature directly affects the compressor’s efficiency, capacity, power consumption, and overall performance.

Here are the key ways in which ambient temperature influences screw compressor performance:

1. Cooling Efficiency:

The cooling efficiency of a screw compressor is affected by the temperature difference between the compressed gas and the ambient air. As the ambient temperature increases, the temperature difference decreases, making it more challenging to transfer heat effectively. This can lead to higher discharge temperatures and reduced cooling efficiency, potentially impacting the compressor’s overall capacity and performance.

2. Capacity and Power Consumption:

Higher ambient temperatures can decrease the capacity of a screw compressor. Compressors are typically designed and rated based on specific operating conditions, including a defined ambient temperature range. When the ambient temperature exceeds the design limits, the compressor may experience reduced volumetric efficiency, resulting in a decrease in its overall capacity. Additionally, the compressor may require more power to maintain the desired pressure levels, leading to increased power consumption.

3. Heat Recovery:

In some applications, screw compressors are equipped with heat recovery systems to utilize the waste heat generated during compression. The effectiveness of heat recovery is influenced by the ambient temperature. Higher ambient temperatures can reduce the temperature differential available for heat exchange, limiting the potential for heat recovery and decreasing the overall system efficiency.

4. Lubrication and Cooling:

Screw compressors rely on lubrication systems to reduce friction and prevent wear between moving parts. The ambient temperature affects the performance of the lubricant. In high ambient temperatures, the lubricant may experience decreased viscosity, potentially leading to inadequate lubrication and increased wear on compressor components. Similarly, the cooling system of the compressor, including fans and heat exchangers, may be less effective in higher ambient temperatures, impacting the compressor’s ability to dissipate heat.

5. Operating Envelope:

Screw compressors have specified operating envelopes, which define the acceptable range of operating conditions, including ambient temperature. Operating the compressor outside its designed ambient temperature range can result in reduced reliability, increased maintenance requirements, and potential system failures. It is crucial to adhere to the manufacturer’s guidelines and ensure that the compressor operates within the recommended ambient temperature limits.

6. Control and Protection:

Modern screw compressors often feature advanced control and protection systems that monitor various parameters, including ambient temperature. These systems may adjust compressor operation, such as modulation of capacity or cooling strategies, to optimize performance and protect the compressor from operating outside safe limits. Understanding the impact of ambient temperature allows for appropriate adjustments and settings to maintain reliable and efficient compressor operation.

It’s important to note that different compressor models and manufacturers may have specific performance characteristics and operating limits. Therefore, consulting the manufacturer’s documentation and guidelines for the particular screw compressor in use is essential.

In summary, ambient temperature significantly affects the performance of screw compressors. Higher ambient temperatures can reduce cooling efficiency, decrease compressor capacity, increase power consumption, and impact lubrication and cooling systems. Adhering to recommended operating conditions and considering ambient temperature limitations are crucial for ensuring optimal performance, reliability, and longevity of screw compressors.

air compressor

Can Screw Compressors Handle High-Pressure Applications?

Yes, screw compressors are capable of handling high-pressure applications. Here’s a detailed explanation:

Screw compressors are known for their ability to deliver high-pressure compressed air or gas. The design of screw compressors allows them to achieve higher pressure ratios compared to other types of compressors, such as reciprocating piston compressors.

The compression process in screw compressors is continuous and smooth, which enables them to handle high-pressure requirements efficiently. The intermeshing rotors create compression chambers that gradually reduce in volume, resulting in the compression of air or gas. By adjusting the rotational speed of the rotors and optimizing the design parameters, screw compressors can generate the desired high discharge pressures.

However, it’s important to note that the maximum pressure capability of a screw compressor may vary depending on factors such as:

  • 1. Compressor Design: The design features of the screw compressor, including the rotor profile, sealing mechanism, and cooling system, can influence its maximum pressure capacity.
  • 2. Rotor Size and Speed: The size and rotational speed of the rotors impact the compression ratio and, consequently, the achievable discharge pressure. Larger rotors and higher rotational speeds generally allow for higher pressure ratios.
  • 3. Drive Power: The power of the drive motor connected to the screw compressor affects its ability to handle high-pressure applications. Adequate power is necessary to overcome the resistance and maintain the desired compression ratio.
  • 4. Structural Integrity: The structural integrity and material strength of the compressor housing, rotors, and other components determine the maximum pressure that the compressor can withstand without failure or leakage.

It’s important to select a screw compressor with the appropriate specifications and consult the manufacturer’s guidelines to ensure that it can handle the specific high-pressure requirements of the application.

Additionally, it’s worth noting that high-pressure applications may also require additional equipment, such as pressure vessels or downstream pressure regulators, to safely handle and control the compressed air or gas at the desired pressure levels.

China Hot selling etc Oil Free Non-Lubricated Rotary Screw Air Compressor Ke90-08et (INV)   air compressor repair near meChina Hot selling etc Oil Free Non-Lubricated Rotary Screw Air Compressor Ke90-08et (INV)   air compressor repair near me
editor by CX 2024-01-10

Leave a Reply

Your email address will not be published. Required fields are marked *