China OEM 50HP 37kw Low-Noise Pm VSD Direct Driven Industrial Screw Air Compressor manufacturer

Product Description

50HP 37KW Low-Noise PM VSD Direct Driven Industrial Screw Air Compressor

TECHNICAL DATA:

Model

WZS-50AVF

Air Flow/Working pressure

6.2m3/min @ 8bar

5.4m3/min @ 10bar

Cooling type of COMPRESSOR

Air cooling

Cooling type of MOTOR

Oil cooling

Driven method

Integrated connection

Start way

Soft VSD Start

VSD inverter

INOVANCE / HOLIP / VEICHI

Exhaust Temp.

< ambient temp. +8 degrees

Oil content

<2ppm

Noise

68±2 dB(A)

Power

380VAC/3ph/0~200Hz

Motor power

37kw/50hp

Dimension

1600*1000*1370mm

Weight

850kg

Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)

2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).
 
High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won’t lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault. 
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.

SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.

FAQ
Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.

Q:  Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity

Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, otherpayment terms also can be discussed based on our cooperation.

Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspectthe completely goods before shipping.

Q:  If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.

Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory

Thank you very much for viewing this page, and wish you a nice day!

Contacts: Vivia Fan
 
 
Web: compressor

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-less
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Structure Type: Closed Type
Installation Type: Stationary Type
Customization:
Available

|

air compressor

What Is the Lifespan of a Typical Screw Compressor?

The lifespan of a typical screw compressor can vary depending on several factors, including the quality of the equipment, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation:

The lifespan of a screw compressor is typically measured in operating hours, which refers to the cumulative hours the compressor has been in operation. While it’s challenging to provide an exact lifespan, as it can vary significantly, screw compressors are generally designed to have a long service life, often ranging from 20,000 to 100,000 operating hours.

Several factors can influence the lifespan of a screw compressor:

  • 1. Quality of Construction: The quality of construction and materials used in the compressor’s manufacturing plays a crucial role in its lifespan. Compressors built with high-quality components and robust construction tend to have a longer service life compared to those with lower-quality materials.
  • 2. Maintenance Practices: Regular and proper maintenance is essential to extend the lifespan of a screw compressor. Following the manufacturer’s recommended maintenance schedule, including tasks such as oil changes, filter replacements, and inspection of critical components, helps ensure optimal performance and reliability. Neglecting maintenance can lead to premature wear and potential breakdowns.
  • 3. Operating Conditions: The operating conditions in which the compressor operates can impact its lifespan. Factors such as temperature, humidity, and the presence of contaminants in the ambient air can affect the compressor’s performance and longevity. Compressors operated in clean, well-ventilated environments with controlled temperature and humidity conditions tend to have longer lifespans.
  • 4. Load and Usage Patterns: The load and usage patterns of the compressor also influence its lifespan. Compressors operated at or near their maximum capacity for prolonged periods may experience higher wear and tear compared to those operated within their recommended operating range. Compressors subjected to frequent start-stop cycles or continuous operation may have different lifespans based on the stress placed on their components.
  • 5. Maintenance and Repairs: The response to maintenance and repair needs can impact the compressor’s lifespan. Timely addressing of maintenance issues and prompt repairs when faults or malfunctions occur can prevent further damage and help prolong the compressor’s lifespan.
  • 6. Manufacturer and Design: The reputation and expertise of the manufacturer play a role in determining the compressor’s lifespan. Established manufacturers with a track record of producing reliable and durable equipment often design their compressors to have longer lifespans. It’s advisable to choose compressors from reputable manufacturers known for their quality and reliability.

It’s important to note that while a screw compressor may have a designed lifespan, it doesn’t necessarily mean it will fail immediately after reaching that threshold. With proper maintenance and care, compressors can often exceed their expected lifespan. On the other hand, neglecting maintenance or subjecting the compressor to harsh operating conditions can shorten its lifespan.

Regular monitoring of the compressor’s performance, including parameters such as discharge temperature, vibration levels, and energy consumption, can help identify any potential issues and take corrective actions to maintain the compressor’s reliability and extend its lifespan.

In summary, the lifespan of a typical screw compressor can range from 20,000 to 100,000 operating hours, depending on factors such as the quality of construction, maintenance practices, operating conditions, usage patterns, and manufacturer reputation. Adhering to proper maintenance practices, operating the compressor within its recommended parameters, and choosing a reputable manufacturer can help ensure a longer lifespan for the screw compressor.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

What Is a Screw Compressor?

A screw compressor is a type of positive displacement compressor that operates based on the principle of rotary motion. Here’s a detailed explanation:

Working Principle:

A screw compressor consists of two helical rotors, typically called male and female rotors, that rotate in opposite directions within a housing. The rotors have specially designed profiles that interlock with each other, creating a series of compression chambers as they rotate. As the rotors rotate, the volume of these chambers decreases, compressing the air or gas trapped inside.

Compression Process:

As the air or gas enters the screw compressor, it gets trapped between the rotors’ lobes or threads. As the rotors continue to rotate, the trapped air or gas is carried along the length of the rotors and gradually compressed. The compression occurs continuously and smoothly as the air or gas moves from the suction side to the discharge side of the compressor. The interlocking rotors ensure a continuous flow of compressed air or gas without pulsation.

Oil-Injected and Oil-Free Variants:

Screw compressors are available in both oil-injected and oil-free variants. In oil-injected screw compressors, a small amount of lubricating oil is injected into the compression chamber to provide lubrication, cooling, and sealing between the rotors. The oil also helps in reducing friction and minimizing wear. Oil-injected screw compressors are commonly used in various industrial applications where a small amount of oil in the compressed air is acceptable.

On the other hand, oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors use specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and prevent the need for oil. Oil-free screw compressors are often favored in applications where oil-free and contaminant-free compressed air is essential, such as in food and beverage, pharmaceutical, and electronics industries.

Applications:

Screw compressors are widely used in various industries for a range of applications. They are commonly employed in manufacturing plants, refineries, power generation facilities, and other industrial settings to supply compressed air or gas for pneumatic tools, process equipment, air conditioning systems, and more. The ability of screw compressors to deliver a continuous flow of compressed air or gas makes them suitable for applications that require a steady and reliable source of compressed air.

Advantages:

Screw compressors offer several advantages compared to other types of compressors. They provide high efficiency and can deliver a large volume of compressed air or gas. The continuous compression process results in smooth operation with minimal pulsation. Additionally, screw compressors are known for their compact design, low vibration levels, and relatively quiet operation.

In summary, a screw compressor is a rotary positive displacement compressor that uses interlocking helical rotors to compress air or gas. It operates based on a continuous compression process and is available in both oil-injected and oil-free variants. Screw compressors find widespread use in various industries for applications that require a reliable source of compressed air or gas.

China OEM 50HP 37kw Low-Noise Pm VSD Direct Driven Industrial Screw Air Compressor   manufacturer China OEM 50HP 37kw Low-Noise Pm VSD Direct Driven Industrial Screw Air Compressor   manufacturer
editor by CX 2024-03-06

Leave a Reply

Your email address will not be published. Required fields are marked *