China Professional Laser Cutting Special CHINAMFG best air compressor

Product Description

1.Specification:
 

all in 1 type
model power(kw) pressure(bar) capacity(m³/min) startup mode outlet size tank/L dimension(L×W×H)mm weight(kg)
YMF11-16 11 1.6 0.6 Permanent Magnet Frequency G1 290 700×1500×1730 595
YMF15-16 15 1.6 1 G1 290 700×1500×1730 630
YMF22-16 22 1.6 1.6 G1 380 700×1500×1800 670

2.Feature:

capacity:0.6-1.6m3/min
pressure:1.6MPa 
power:11-22kw 
startup mode: Permanent Magnet Frequency 

Performance characteristics 
Laser cutting is a new kind of high-tech cutting technology, which USES energy laser beam to cut, and has the advantages of high cutting efficiency and smooth machining end face. It is wide KB used in machinery, hardware and other industries. For the air source used by laser cutting (oxygen, nitrogen, air), air has its unique advantages.low cost,cutting some materials can exceed the effect of oxygen and nitrogen, the system has been successful KB used in the laser cutting industry.
1.built-in cold dryer and air compressor integrated design, all built-in air compressor in the whole machine, cold dryer using high-efficiency three-in-1 stainless steel plate heat exchange, plate heat exchange advantages are as follows: air dryer special plate heat exchange, save space except small volume, and high heat transfer efficiency, both pre-cooler (return temperature), evaporator, air-water separator 3 machines, air-water separation structure and conventional filter without filter and other consumables, avoid blockage.
2.Hidden double tank design professional hidden two-in-1 gas storage tank to avoid frequent start and stop of air compressor system pressure stability at the same time provide stable pressure clean compressed air. One is to reduce pressure fluctuations, reduce start and stop, energy saving; the other is clean gas pressure stability, after shutdown has a certain ability to continuously supply clean gas sources.
3.The design of skirt soundproof air inlet structure can quickly cool the surface of gas storage tank, there is no air inlet on the whole air compressor box, all cooling air enters the machine from the skirt structure, Cooling air through the skirt air inlet at the same time to cool the gas tank surface to minimize the cold dryer load.
4.The unique skirt silencing structure gas storage tank is an arc structure, the noise reflector is pasted with sound-absorbing cotton to reduce the reflected noise, and the arc surface is reflected to the skirt to reduce the direct leakage of noise to reduce the noise.
5.Integrated control system one-button switch machine, automatic operation control. Integrated automatic operation and alarm display is clear.

3.Compressed Air Solutions:

All the professionalism you need to have your correct supply of AIR(Air Volume, Air Pressure and Air Quality)
• When it comes to air (you need it, we have it).
• Piston compressors Cast Iron, Aluminum.
• Screw compressors, and all compressor accessories.
• Motors, Air Pumps, Regulators, Filters, Dryers, after coolers and so on.
• Our Heavy Duty Air Compressors with a sense of(Quality saves your cost)
• Unique Design and Engineering, special Machining Standards.
• Skilled labor for assembly line, backed up with technical support worldwide.

4.About us:

Founded in 2571, ZheJiang CHINAMFG HangZhoui Technology Co., Ltd. is a subsidiary of CHINAMFG Electrical Stock Company,The company mainly produces air compressors,air blower,baking burner for tobacco and equipment. The company’s sales and operation headquarters is located in ZheJiang , the main production base is located in the eastern new area of HangZhou City, ZHangZhoug Province, covering an area of nearly 100 mu, with nearly 90,000 square production workshop, at the same time in ZheJiang HangZhou District CHINAMFG production base. Adhering to the corporate culture of CHINAMFG COMPANY “quality creation Sayi, credibility and integrity based on the world “, the company actively develops, forge ahead, and is committed to building the company into an international company with core competitiveness and leading the innovation and development of the industry.

5.Why you choose us:

6.FAQ:
Q1: Are you the manufacturer or trading company?
A1: We are the manufacturer.

Q2: Where is your factory?
A2: It is located in HangZhou City, ZHangZhoug Province, China.

Q3: What’s the terms of trade?
A3: FOB,CFR,CIF or EXW are all acceptable.

Q4: What’s the terms of payment?
A4: T/T,L/C at sight or cash.

Q5: How long is your delivery time?
A5: Generally it is 5-10 days if the goods are in stock or it is 20-30 days if the goods are not in stock, it is according to quantity.

Q6: What is the advantage about your company?
A6: Our company has professional team and professional production line.

Q7: If we travel to China to checking your facility, are you welcome?
A7: Of course, why not? We will provide the whole accompany from you landing in China. Only Give us a call before your arrive. We will pick up you from the airport, living in our company’s hotel, and driving by car take you visiting our company. Warm Welcome!

Q8: How Many Years of your company working in this industry?
A8: We have 20-year experience in this field.

7. Contact us:

ZheJiang CHINAMFG HangZhouI TECHNOLOGY CO., LTD.
Address:Company Address: O Block,10th Floor,768 Xietu Road, Xihu (West Lake) Dis. District, ZheJiang
Address:ZHangZhoug Factory Address :23rd Street, New Eastern District, HangZhou City, ZHangZhoug Province
Address:ZheJiang Factory Address :1515 Xihu (West Lake) Dis. Road, Luojing Town, HangZhou District, ZheJiang
Phone:571-633 0571 1

 

 

 

After-sales Service: New Replacement
Warranty: 1year
Lubrication Style: Lubricated
Cooling System: Air Cooling or Water Cooling
Power Source: AC Power
Cylinder Position: Vertical
Customization:
Available

|

air compressor

What Safety Precautions Should Be Taken When Operating Screw Compressors?

When operating screw compressors, it is important to follow specific safety precautions to ensure the well-being of personnel and prevent potential accidents. Here’s a detailed explanation:

1. Familiarize Yourself with the Equipment:

  • Before operating a screw compressor, thoroughly read and understand the manufacturer’s instructions, safety guidelines, and operating procedures. Familiarize yourself with the specific features, controls, and safety devices of the compressor.

2. Wear Appropriate Personal Protective Equipment (PPE):

  • Wear the necessary PPE, such as safety glasses, hearing protection, gloves, and appropriate clothing, when operating the compressor. PPE helps protect against potential hazards, including flying debris, noise, and contact with hot or moving parts.

3. Ensure Proper Ventilation:

  • Operate the screw compressor in a well-ventilated area to prevent the buildup of potentially harmful gases or fumes. Ensure that the compressor’s intake and exhaust vents are not obstructed, allowing for adequate airflow.

4. Compressor Location:

  • Position the compressor on a stable and level surface to prevent tipping or instability during operation. Ensure that the compressor is located away from flammable materials, heat sources, or sources of ignition.

5. Electrical Safety:

  • Follow electrical safety guidelines and ensure that the compressor is properly grounded. Avoid using damaged or frayed electrical cords and ensure that the electrical connections are secure.

6. Lockout/Tagout Procedures:

  • Before performing any maintenance or repair tasks on the compressor, follow lockout/tagout procedures to isolate electrical power and prevent accidental startup. Lockout/tagout procedures help protect against unexpected energization of the compressor or its components.

7. Pressure Relief:

  • Before performing any maintenance tasks or opening the compressor, ensure that all pressure has been relieved from the system. Follow proper procedures for depressurizing the compressor and associated piping to avoid sudden releases of pressure.

8. Hot Surfaces:

  • Be cautious of hot surfaces, such as compressor casings, piping, or discharge components. Allow sufficient cooling time before touching or performing maintenance tasks on hot surfaces to avoid burns.

9. Maintenance and Inspection:

  • Adhere to the manufacturer’s recommended maintenance schedule and perform regular inspections of the compressor. Replace any worn or damaged components promptly to prevent potential hazards or malfunctions.

10. Emergency Procedures:

  • Be familiar with emergency procedures, including how to shut down the compressor in case of an emergency, how to respond to leaks or spills, and how to handle fire or electrical incidents. Have emergency contact information readily available.

11. Training and Qualified Personnel:

  • Ensure that operators and maintenance personnel are adequately trained in the safe operation and maintenance of screw compressors. Only allow qualified personnel to perform maintenance or repair tasks.

It is essential to consult the specific safety guidelines provided by the manufacturer of the screw compressor as they may include additional precautions or recommendations.

In summary, when operating screw compressors, it is important to familiarize yourself with the equipment, wear appropriate PPE, ensure proper ventilation, follow electrical safety measures, implement lockout/tagout procedures, be cautious of hot surfaces, perform regular maintenance and inspections, and be prepared with emergency procedures. By following these safety precautions, the risk of accidents or injuries can be minimized, ensuring a safe working environment when operating screw compressors.

air compressor

How Do You Maintain the Air Quality in a Screw Compressor System?

Maintaining air quality in a screw compressor system is crucial to ensure the performance, efficiency, and reliability of the compressed air. Here’s a detailed explanation:

1. Proper Intake Filtration:

Install high-quality intake filters to prevent contaminants, such as dust, dirt, and debris, from entering the screw compressor system. These filters should have an appropriate filtration rating to effectively capture particles of the desired size. Regularly inspect and clean or replace the intake filters to maintain their effectiveness.

2. Compressed Air Dryers:

Use compressed air dryers, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air. Moisture can lead to corrosion, damage to pneumatic equipment, and compromised air quality. The type of dryer selected depends on the specific application requirements and the desired level of moisture removal.

3. Oil Removal Filters:

In oil-injected screw compressors, oil is used for lubrication, which can contaminate the compressed air. Install oil removal filters downstream of the compressor to remove any oil carryover from the compressed air. These filters typically use coalescing technology to separate and trap oil particles, ensuring clean air quality.

4. Condensate Management:

Effectively manage condensate, which is formed when moisture in the compressed air condenses as it cools. Install condensate drains and separators to remove and properly dispose of condensate. Improper condensate management can lead to water contamination in the compressed air system.

5. Regular Maintenance:

Perform regular maintenance tasks as recommended by the manufacturer, including oil changes, filter replacements, and inspections. Proper maintenance helps ensure that the compressor system operates efficiently and minimizes the risk of contaminants entering the compressed air.

6. Air Receiver Tank Maintenance:

If the screw compressor system includes an air receiver tank, regularly inspect and clean the tank to remove any accumulated debris or contaminants. Additionally, ensure that the tank’s drain valve is functioning correctly to remove any water or condensate from the tank.

7. Leak Detection and Repair:

Regularly inspect the compressed air system for leaks. Leaks not only waste energy but also allow contaminants from the surrounding environment to enter the system. Use appropriate leak detection methods, such as ultrasonic detectors or soapy water solutions, to identify and promptly repair any leaks.

8. Monitor and Control Operating Conditions:

Monitor and maintain proper operating conditions within the screw compressor system. This includes monitoring discharge pressure, temperature, and other relevant parameters to ensure they are within acceptable ranges. Implement appropriate control strategies, such as regulating compressor capacity or adjusting dryer settings, to optimize air quality while meeting the specific application requirements.

9. Training and Awareness:

Provide training to operators and maintenance personnel on the importance of air quality in a screw compressor system. Ensure they understand proper maintenance procedures, the significance of filtration, and how to identify and address potential air quality issues.

10. Compliance with Regulations:

Be aware of and comply with relevant regulations and standards governing air quality in your specific industry or application. This may include adherence to guidelines such as ISO 8573, which specifies air purity classes for different contaminants in compressed air systems.

By following these practices, you can maintain the air quality in a screw compressor system, ensuring clean, reliable, and high-quality compressed air for various applications.

air compressor

How Does a Screw Compressor Work?

A screw compressor operates based on a unique rotary positive displacement principle. Here’s a detailed explanation:

Working Principle:

A screw compressor consists of two helical rotors, typically referred to as male and female rotors, that rotate in opposite directions within a housing. The rotors have specially designed profiles that interlock with each other, creating a series of compression chambers as they rotate. The compression chambers gradually reduce in volume as the rotors rotate, compressing the air or gas trapped inside.

Suction Process:

The suction process begins when the rotors start rotating. As they rotate, the helical lobes or threads on the rotors create expanding spaces between them. The expanding spaces draw in the air or gas from the inlet port, allowing it to enter the compression chamber. The suction process continues as the rotors rotate, and the expanding spaces move the air or gas towards the discharge side of the compressor.

Compression Process:

As the air or gas enters the compression chamber, it gets trapped between the interlocking lobes or threads of the rotors. As the rotors continue to rotate, the trapped air or gas is carried along the length of the rotors. The volume of the compression chamber gradually decreases as the lobes or threads of the rotors intermesh, compressing the air or gas. The compression process is continuous and smooth as the air or gas moves from the suction side to the discharge side of the compressor.

Discharge Process:

Once the air or gas reaches the discharge end of the compression chamber, it is pushed towards the outlet port. The compressed air or gas is then released from the compressor through the outlet port to be used for various applications.

Oil-Injected and Oil-Free Variants:

Screw compressors are available in both oil-injected and oil-free variants. In oil-injected screw compressors, a small amount of lubricating oil is injected into the compression chamber. The oil provides lubrication, cooling, and sealing between the rotors, reducing friction and minimizing wear. The oil-injected variant is commonly used in industrial applications where a small amount of oil in the compressed air is acceptable.

Oil-free screw compressors, on the other hand, are designed to operate without the need for oil lubrication. These compressors use specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and eliminate the need for oil. Oil-free screw compressors are preferred in applications that require oil-free and contaminant-free compressed air, such as in the food and beverage, pharmaceutical, and electronics industries.

In summary, a screw compressor works by utilizing interlocking helical rotors to compress air or gas. The rotating rotors draw in the air or gas during the suction process, and as they rotate, the trapped air or gas is compressed within the compression chamber. The compressed air or gas is then discharged from the compressor. Screw compressors are available in oil-injected and oil-free variants, catering to different application requirements.

China Professional Laser Cutting Special CHINAMFG   best air compressorChina Professional Laser Cutting Special CHINAMFG   best air compressor
editor by CX 2023-09-27

Leave a Reply

Your email address will not be published. Required fields are marked *