China Super Quality Portable Magnetic Rotary Screw Air Compressor with Air Tank and Dryer for Industrial Equipment mini air compressor

Product Description

AirHorse Promises Every single Equipment Will Operate Well Far more Than 15 A long time

Functions Of  with tank and dryer Mounted Screw Air Compressor

1. A Revolutionary Improvement
Going considerably outside of combining the compressor, dryer and filters in 1 bundle, sensible integration also:
• Eradicates susceptible interconnecting piping 
• Minimizes pressure losses and drops 
• Integrates the compressor, dryer and filter into an power-decreasing, optimized system 
• Incorporates the complete supply-side program into 1 whisper-peaceful deal, enabling set up practically everywhere
• Gives generous room to promote cooling and to let unobstructed support

two. Dry and Thoroughly clean Compressed Air
The Appropriate Air Good quality to Do the Task
• All Total Air Technique packages arrive completely equipped with an integral, strength-preserving air remedy middle including a high-overall performance air dryer and filtration pack to take away water, oil and particles from the air stream. 
• All factors are flawlessly matched to supply the appropriate air good quality to increase air-driven resource and system tools lifestyle.

three. Substantial-effectiveness Parts
Environment the Normal in Technique Design
The Whole Air System incorporates only the greatest quality elements to guarantee that the two method efficiency and productivity are maximized– a high-effectiveness compressor space without the problem, complexity and costs of the standard compressor place. Total Air Technique packages occur fully geared up with:
• A high-efficiency rotary screw air compressor 
• An power-saving cycling refrigerated air dryer 
• A high-effectiveness coalescing filter 
• A high-performance particulate filter 
• An integral air receiver storage tank 
• Built-in compressor and dryer controls 
• Lower pressure fall piping

4 Existence time reward
(Advantages are nearly countless )
• Plug-and-enjoy simplicity–gets rid of the top leads to of failure in air methods: incorrect sizing and installation 
• Practically no put in costs–eliminates eighty% of install time, material and costs 
• Integral packaging will save beneficial flooring room for other employs. 
• Life span power personal savings by way of hugely efficient components 
• Elevated productivity via much better air top quality-Eradicates h2o and corrosion ensuing in extended device and products life

such as: 380Volt,3phase,50hz
420Volt,3phase,50hz
380Volt,3phase,60hz
220Volt,3phase and 60hz, etc.

Technological Specs Of Tank Mounted Screw Air Compressor:

Specific Personalized Provider:

1) Total OEM
• Amount: at the very least 5 pcs
• In this plan, we will do all the alterations (Coloration, identify plate and emblem) as your need to have, and will not demand additional payment.

2) 50 % OEM
• Amount: no limit
• Below this system, we can make the necessary alteration (identify plate and logo) but we will charge some additional payment for the name plate, as the title plate manufacturing unit has the MOQ.

three) Brand OEM
• Amount: no limit
• Only the brand will be changed to yours, and no extra payment will be billed.

 

 

 


/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Free Spare Parts
Warranty: One Year Whole Machine
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical

###

Samples:
US$ 4500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

1. A Revolutionary Advancement
Going far beyond combining the compressor, dryer and filters in one package, smart integration also:
• Eliminates vulnerable interconnecting piping 
• Minimizes pressure losses and drops 
• Integrates the compressor, dryer and filter into an energy-reducing, optimized system 
• Incorporates the entire supply-side system into one whisper-quiet package, enabling installation virtually anywhere
• Provides generous space to promote cooling and to allow unobstructed service

2. Dry and Clean Compressed Air
The Right Air Quality to Do the Job
• All Total Air System packages come fully equipped with an integral, energy-saving air treatment center including a high-performance air dryer and filtration pack to remove water, oil and particles from the air stream. 
• All components are perfectly matched to deliver the right air quality to increase air-powered tool and system equipment life.

3. High-efficiency Components
Setting the Standard in System Design
The Total Air System incorporates only the highest quality components to ensure that both system efficiency and productivity are maximized– a high-efficiency compressor room without the hassle, complexity and costs of the traditional compressor room. Total Air System packages come fully equipped with:
• A high-efficiency rotary screw air compressor 
• An energy-saving cycling refrigerated air dryer 
• A high-efficiency coalescing filter 
• A high-efficiency particulate filter 
• An integral air receiver storage tank 
• Integrated compressor and dryer controls 
• Low pressure drop piping

4 Life time benefit
(Benefits are virtually endless )
• Plug-and-play simplicity–eliminates the leading causes of failure in air systems: incorrect sizing and installation 
• Virtually no install costs–eliminates 80% of install time, material and costs 
• Integral packaging saves valuable floor space for other uses. 
• Lifetime power savings through highly efficient components 
• Increased productivity through better air quality-Eliminates water and corrosion resulting in extended tool and equipment life

such as: 380Volt,3phase,50hz
420Volt,3phase,50hz
380Volt,3phase,60hz
220Volt,3phase and 60hz, etc.


/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Free Spare Parts
Warranty: One Year Whole Machine
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical

###

Samples:
US$ 4500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

1. A Revolutionary Advancement
Going far beyond combining the compressor, dryer and filters in one package, smart integration also:
• Eliminates vulnerable interconnecting piping 
• Minimizes pressure losses and drops 
• Integrates the compressor, dryer and filter into an energy-reducing, optimized system 
• Incorporates the entire supply-side system into one whisper-quiet package, enabling installation virtually anywhere
• Provides generous space to promote cooling and to allow unobstructed service

2. Dry and Clean Compressed Air
The Right Air Quality to Do the Job
• All Total Air System packages come fully equipped with an integral, energy-saving air treatment center including a high-performance air dryer and filtration pack to remove water, oil and particles from the air stream. 
• All components are perfectly matched to deliver the right air quality to increase air-powered tool and system equipment life.

3. High-efficiency Components
Setting the Standard in System Design
The Total Air System incorporates only the highest quality components to ensure that both system efficiency and productivity are maximized– a high-efficiency compressor room without the hassle, complexity and costs of the traditional compressor room. Total Air System packages come fully equipped with:
• A high-efficiency rotary screw air compressor 
• An energy-saving cycling refrigerated air dryer 
• A high-efficiency coalescing filter 
• A high-efficiency particulate filter 
• An integral air receiver storage tank 
• Integrated compressor and dryer controls 
• Low pressure drop piping

4 Life time benefit
(Benefits are virtually endless )
• Plug-and-play simplicity–eliminates the leading causes of failure in air systems: incorrect sizing and installation 
• Virtually no install costs–eliminates 80% of install time, material and costs 
• Integral packaging saves valuable floor space for other uses. 
• Lifetime power savings through highly efficient components 
• Increased productivity through better air quality-Eliminates water and corrosion resulting in extended tool and equipment life

such as: 380Volt,3phase,50hz
420Volt,3phase,50hz
380Volt,3phase,60hz
220Volt,3phase and 60hz, etc.

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Super Quality Portable Magnetic Rotary Screw Air Compressor with Air Tank and Dryer for Industrial Equipment     mini air compressorChina Super Quality Portable Magnetic Rotary Screw Air Compressor with Air Tank and Dryer for Industrial Equipment     mini air compressor
editor by CX 2023-03-27

Leave a Reply

Your email address will not be published. Required fields are marked *