China supplier 7.5kw 15kw 22kw 37kw 55kw Low Noise High Efficiency Electric Stationary Rotary Permanent Magnet VSD Screw Type Air Compressor for Color Sorter Industry best air compressor

Product Description

Product Description
HS series compressors are designed in accordance with the subtropical high temperature and high humidity working environment, and the optimized cooling design ensures that the unit can operate normally in a high temperature environment of 46°C.

Product Feature
1. Adhering to the concept of pursuing high-quality products, HS series compressors are designed in accordance with the subtropical high temperature and high humidity working environment, and the optimized cooling design ensures that the unit can operate continuously and normally in a high temperature environment of 46 °C.

2. Adopt the world-renowned CHINAMFG main motor. The protection grade is IP55. The insulation grade is F grade 100.

 

3. The gas circuit adopts the stainless steel pipe design of the American SAE standard, with low resistance and strong corrosion resistance, which completely eliminates the common problems of oil leakage, air leakage and air leakage under high pressure.

4. The patented synchronous two-stage compression technology is adopted, so that the compression ratio of each stage of the screw host is less than 6, which is lower than that of the ordinary screw air compressor, which ensures the service life of the screw host.

5. Each stage of the screw host has an independent oil cooling system and an automatic water removal system to ensure that the screw host can run stably around the clock.

6. The powerful third-generation e-Control controller has 6 operation monitoring points to comprehensively monitor the working conditions of the main engine, air filter, oil filter, oil separator, cooler and other important components, so that the compressor can run stably.
 

Specification
 

Mode HSV75A (W)-40 HSV90A (W)-40 HSV110A (W)-40 HSV132A (W)-40
Operating Pressure    Bar (g) 40 40 40 40
Motor speed (kw) 75 90 110 132
Exhaust volume (m³/min) 5.5 7.2 9.0 10.0
Cooling method water cooling water cooling water cooling water cooling
Noise dB(A) 72(75) 74(78) 74(78) 74(78)
Length 2550 3150 3150 3150
Width 1480 1880 1880 1880
Height 1850 1850 1850 1850
         
Mode HSV75A (W)-35 HSV110A (W)-30 HSV55A-25 HSV90A-25
Operating Pressure Bar(g) 35 30 25 25
Motor speed (kw) 75 110 55 90
Exhaust volume (m³/min) 7.6 11.0 5.4 9.5
Cooling method air cooling (water cooling ) air cooling(water cooling ) 74(78) air cooling
Noise dB(A) 72(75) 74(78) 72(75) 74(78)
Length 2550 3150 2550 3150
Width 1480 1880 1480 1880
Height 1850 1850 1850 1850
         
Mode HSV180A-25 HSV110A (W)-20    
Operating Pressure Ba(g) 25 20    
Motor speed (kw) 180 110    
Exhaust volume (m³/min) 19.0 12.5    
Cooling method air cooling(water cooling ) air cooling(water cooling )    
Noise dB(A) 78(82) 74(78)    
Length 3980 3150    
Width 1980 1880    
Height 1980 1850    

 

After-sales Service: Online
Lubrication Style: Lubricated
Cooling System: Air Cooling
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

Are There Regulations Governing the Use of Screw Compressors in Certain Industries?

Yes, there are regulations governing the use of screw compressors in certain industries. Here’s a detailed explanation:

1. Occupational Safety and Health Administration (OSHA):

In the United States, OSHA sets standards and regulations to ensure the safety and health of workers. While OSHA does not have specific regulations solely focused on screw compressors, they have general requirements that apply to compressed air systems, including screw compressors. These requirements cover aspects such as electrical safety, guarding of moving parts, and proper maintenance practices to ensure worker safety.

2. Environmental Protection Agency (EPA):

The EPA in the United States regulates air emissions to protect the environment and public health. While screw compressors themselves are not directly regulated, if the compressed air is used in processes that emit pollutants, such as in industrial manufacturing, the EPA may have regulations that apply to those specific industries or processes.

3. Industry-Specific Regulations:

Certain industries have specific regulations that govern the use of screw compressors or compressed air systems. These regulations are often aimed at ensuring product quality, safety, and environmental compliance. Some examples include:

a) Food and Beverage Industry: The food and beverage industry often has strict regulations to ensure product safety and prevent contamination. Compressed air used in processes such as packaging, conveying, or powering equipment may need to meet specific quality standards, such as those established by the Food and Drug Administration (FDA) or the Global Food Safety Initiative (GFSI).

b) Pharmaceutical Industry: The pharmaceutical industry has stringent regulations to ensure product quality, safety, and compliance with Good Manufacturing Practices (GMP). Compressed air used in pharmaceutical manufacturing processes must meet specific standards, such as those outlined in the United States Pharmacopeia (USP) or the European Pharmacopoeia (Ph. Eur.).

c) Electronics Industry: The electronics industry often requires clean and dry compressed air to prevent damage to sensitive electronic components. Standards such as ISO 8573, which specify air purity classes for different contaminants in compressed air systems, may be applicable.

d) Automotive Industry: The automotive industry may have regulations and standards related to the use of compressed air in manufacturing processes, such as painting or pneumatic tools. These regulations often focus on worker safety, product quality, and environmental compliance.

It’s important for organizations in these industries to be aware of and comply with the relevant regulations governing the use of screw compressors. Compliance helps ensure the safety of workers, product quality, environmental protection, and overall regulatory compliance.

It’s worth noting that regulations may vary by country and region, so it’s essential to consult the specific regulations applicable to the industry and location where the screw compressors are being used.

air compressor

Can Screw Compressors Handle High-Pressure Applications?

Yes, screw compressors are capable of handling high-pressure applications. Here’s a detailed explanation:

Screw compressors are known for their ability to deliver high-pressure compressed air or gas. The design of screw compressors allows them to achieve higher pressure ratios compared to other types of compressors, such as reciprocating piston compressors.

The compression process in screw compressors is continuous and smooth, which enables them to handle high-pressure requirements efficiently. The intermeshing rotors create compression chambers that gradually reduce in volume, resulting in the compression of air or gas. By adjusting the rotational speed of the rotors and optimizing the design parameters, screw compressors can generate the desired high discharge pressures.

However, it’s important to note that the maximum pressure capability of a screw compressor may vary depending on factors such as:

  • 1. Compressor Design: The design features of the screw compressor, including the rotor profile, sealing mechanism, and cooling system, can influence its maximum pressure capacity.
  • 2. Rotor Size and Speed: The size and rotational speed of the rotors impact the compression ratio and, consequently, the achievable discharge pressure. Larger rotors and higher rotational speeds generally allow for higher pressure ratios.
  • 3. Drive Power: The power of the drive motor connected to the screw compressor affects its ability to handle high-pressure applications. Adequate power is necessary to overcome the resistance and maintain the desired compression ratio.
  • 4. Structural Integrity: The structural integrity and material strength of the compressor housing, rotors, and other components determine the maximum pressure that the compressor can withstand without failure or leakage.

It’s important to select a screw compressor with the appropriate specifications and consult the manufacturer’s guidelines to ensure that it can handle the specific high-pressure requirements of the application.

Additionally, it’s worth noting that high-pressure applications may also require additional equipment, such as pressure vessels or downstream pressure regulators, to safely handle and control the compressed air or gas at the desired pressure levels.

China supplier 7.5kw 15kw 22kw 37kw 55kw Low Noise High Efficiency Electric Stationary Rotary Permanent Magnet VSD Screw Type Air Compressor for Color Sorter Industry   best air compressorChina supplier 7.5kw 15kw 22kw 37kw 55kw Low Noise High Efficiency Electric Stationary Rotary Permanent Magnet VSD Screw Type Air Compressor for Color Sorter Industry   best air compressor
editor by CX 2023-11-21

Leave a Reply

Your email address will not be published. Required fields are marked *