Tag Archives: electric compressor

China best Low Pressure Industrial Electric Oil Free Small Silent Rotary Gas Station Compressor with high quality

Product Description

Detailed Photos

Low Pressure Industrial Electric Oil Free Small Silent Rotary Gas Station Compressor

Description&Advantages

Product Descriptions:

The gas station, which takes natural gas input through pipelines, increases the pressure on-site and then either directly fills or stores the gas in fixed storage cylinder groups (wells) for refueling CNG vehicles with CNG. The process system consists of a pressure regulation and metering device, desulfurization and dehydration equipment, a natural gas compressor, CNG storage facilities, a sequential control device, CNG refueling facilities, safety protection devices for refueling process equipment, electrical devices, CNG pipelines and components, etc

Advantages:
Our products, incorporating technology from Austria’s LMF and Germany’s CHINAMFG Demag companies, exhibit high reliability. Wearable parts like gas valves and piston rings use products from Austria’s Hoerbiger company, with a lifespan exceeding 8000 hours. The system supports soft starting, allowing frequent start and stop cycles for the compressor.  It features a wide intake range for broad adaptability. The overall skid-mounted structure results in low noise and is easy to install in urban areas, leading to investment savings.
It is equipped with a CHINAMFG PLC control system for high automation, ABB soft start (or variable frequency), and features automatic shutdown with audible and visual alarms in case of faults

Product Parameters

 

Model Inlet Pressure
(Mpa)
Outlet Pressure
(Mpa)
Capacity
(Nm3/h)
Power
(Kw)
Remarks
ZF-0.16/6-250 0.6 25 68 22  
VF-2.4/8-250 0.8 25 1300 220  
VF-0.76/10-250 1.0 25 500 Q6135DR1  
VF-2.2/10-250 1.0 25 1452 220-8  
VF-3.2/(2.5-4)-250 0.25-0.4 25 670-1000 270  
VF-2/(10-16)-250 1.0-1.6 25 1320-2000 280  
VF-2.5/3-210 0.3 21 600 132  
VF-0.11/(70-200)-250 7-20 25 468-1326 30  
VF-2.5/(0.8-1.6)-250 0.08-0.16 25 270-390 90  
VF-2/(2-3)-250 0.2-0.3 25 360-480 110  
VF-1.1/(5-6)-250 0.5-0.6 25 396-462 90  
VF-0.54/30-250 3.0 25 1004 110  
VF-0.8/30-250 3.0 25 1488 160  
VF-0.28/(40-80)-250 4.0-8.0 25 688-1360 90  
VFD-0.36/(20-200)-250 2.0-20 25 680-2210 110 Soundproof Cabin
VFD-0.32/(20-200)-250 2.0-20 25 600-1700 90 Soundproof Cabin
VFD-0.28/(20-200)-250 2.0-20 25 525-1430 75 Soundproof Cabin
VFD-0.16/(20-200)-250 2.0-20 25 600 55 Soundproof Cabin
Note: This series of CNG refueling station compressors can be customized with the following parameters: Pressure: 0.2-20Mpa, Flow rate: 400-1200 Nm³/h.

Our Factory

 

Part of Customer Visit

 

Certifications & Testing

 

Related Product

 

FAQ

Q:Are you a factory?

A:Yes, we are indeed a factory. We specialize in manufacturing high-quality Air/Gas Compressors and are proud to be a primary source for these products.

Q:How long is your delivery time?
A:It varies depending on the specific situation. For our standard configuration compressors, the delivery time is around 30 days. For customized compressors, it usually takes about 30-45 days.

Q:What technical support do you offer?
A:We offer comprehensive technical support to our clients, including remote assistance for installation and commissioning processes. Additionally, we have a team of seasoned engineers ready to be deployed to international client locations for meticulous on-site debugging, installation, and post-installation services.

Q:What is your warranty period?
A:Our warranty policy is valid for a period of 18 months from the date of commissioning at the end customer’s site or 21 months from the date of receipt by the purchaser, whichever comes first. This comprehensive coverage is designed to ensure total customer satisfaction and the reliability of our products

Q:How do you package the compressors?
A:For smaller compressors, we utilize robust plywood boxes that conform to export specifications.
    For the larger units, we strategically place them in freight containers, implementing secure fastening methods to safeguard            against any potential damage during the shipping process.

Q:What are your payment terms?
A:Usually, the payment is made by T/T with a 30% down payment CHINAMFG confirmation of the Proforma Invoice (PI), and the balance is to be paid after inspection and before shipment. We accept both TT and L/C at sight.

Send message  Get product Offer & Brochure!!!

 ↓↓↓

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Local Teams
Warranty: 18 Months
Lubrication Style: Customized
Cooling System: Air Cooling/Water Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Customized
Samples:
US$ 40000/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Do You Maintain a Gas Air Compressor?

Maintaining a gas air compressor is essential to ensure its optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, extends the compressor’s lifespan, and promotes efficient operation. Here are some key maintenance steps for a gas air compressor:

1. Read the Manual:

Before performing any maintenance tasks, thoroughly read the manufacturer’s manual specific to your gas air compressor model. The manual provides important instructions and guidelines for maintenance procedures, including recommended intervals and specific maintenance requirements.

2. Check and Change the Oil:

Gas air compressors typically require regular oil changes to maintain proper lubrication and prevent excessive wear. Check the oil level regularly and change it according to the manufacturer’s recommendations. Use the recommended grade of oil suitable for your compressor model.

3. Inspect and Replace Air Filters:

Inspect the air filters regularly and clean or replace them as needed. Air filters prevent dust, debris, and contaminants from entering the compressor’s internal components. Clogged or dirty filters can restrict airflow and reduce performance. Follow the manufacturer’s guidelines for filter cleaning or replacement.

4. Drain Moisture from the Tank:

Gas air compressors accumulate moisture in the compressed air, which can lead to corrosion and damage to the tank and internal components. Drain the moisture from the tank regularly to prevent excessive moisture buildup. Refer to the manual for instructions on how to properly drain the moisture.

5. Check and Tighten Connections:

Regularly inspect all connections, fittings, and hoses for any signs of leaks or loose connections. Tighten any loose fittings and repair or replace damaged hoses or connectors. Leaks can lead to reduced performance and inefficiency.

6. Inspect Belts and Pulleys:

If your gas air compressor has belts and pulleys, inspect them for wear, tension, and proper alignment. Replace any worn or damaged belts and ensure proper tension to maintain optimal performance.

7. Clean the Exterior and Cooling Fins:

Keep the exterior of the gas air compressor clean from dirt, dust, and debris. Use a soft cloth or brush to clean the surfaces. Additionally, clean the cooling fins regularly to remove any accumulated debris that can impede airflow and cause overheating.

8. Schedule Professional Servicing:

While regular maintenance can be performed by the user, it is also important to schedule professional servicing at recommended intervals. Professional technicians can perform thorough inspections, conduct more complex maintenance tasks, and identify any potential issues that may require attention.

9. Follow Safety Precautions:

When performing maintenance tasks on a gas air compressor, always follow safety precautions outlined in the manual. This may include wearing protective gear, disconnecting the power source, and ensuring proper ventilation in confined spaces.

By following these maintenance steps and adhering to the manufacturer’s guidelines, you can keep your gas air compressor in optimal condition, prolong its lifespan, and ensure safe and efficient operation.

air compressor

Can Gas Air Compressors Be Used for Natural Gas Compression?

Gas air compressors are not typically used for natural gas compression. Here’s a detailed explanation:

1. Different Compressed Gases:

Gas air compressors are specifically designed to compress atmospheric air. They are not typically designed or suitable for compressing natural gas. Natural gas, which is primarily composed of methane, requires specialized compressors designed to handle the unique properties and characteristics of the gas.

2. Safety Considerations:

Natural gas compression involves handling a flammable and potentially hazardous substance. Compressing natural gas requires specialized equipment that meets stringent safety standards to prevent leaks, minimize the risk of ignition or explosion, and ensure the safe handling of the gas. Gas air compressors may not have the necessary safety features or materials to handle natural gas safely.

3. Equipment Compatibility:

Natural gas compression systems typically include components such as gas compressors, gas coolers, separators, and control systems that are specifically designed and engineered for the compression and handling of natural gas. These components are built to withstand the specific demands and conditions associated with natural gas compression, including the high pressures and potential presence of impurities.

4. Efficiency and Performance:

Compressing natural gas requires specialized compressors that can handle the high-pressure ratios and volumetric flow rates associated with the gas. Gas air compressors are generally not designed to achieve the same compression ratios and performance levels required for natural gas compression. Using gas air compressors for natural gas compression would likely result in inefficient operation and suboptimal performance.

5. Regulatory Compliance:

Compressing natural gas is subject to various regulations and standards to ensure safety, environmental protection, and compliance with industry guidelines. These regulations often dictate specific requirements for equipment, materials, and operating procedures in natural gas compression systems. Gas air compressors may not meet these regulatory requirements for natural gas compression.

6. Industry Standards and Practices:

The natural gas industry has well-established standards and best practices for equipment selection, installation, and operation in gas compression systems. These standards are based on the specific requirements and characteristics of natural gas. Gas air compressors do not align with these industry standards and practices, which are essential for safe and efficient natural gas compression.

In summary, gas air compressors are not suitable for natural gas compression. Natural gas compression requires specialized equipment designed to handle the unique properties and safety considerations associated with the gas. Compressors specifically engineered for natural gas compression offer the necessary performance, safety features, and regulatory compliance required for efficient and reliable operation in natural gas compression systems.

air compressor

Can Gas Air Compressors Be Used in Remote Locations?

Yes, gas air compressors are well-suited for use in remote locations where access to electricity may be limited or unavailable. Their portability and reliance on gas engines make them an ideal choice for providing a reliable source of compressed air in such environments. Here’s a detailed explanation of how gas air compressors can be used in remote locations:

1. Independence from Electrical Grid:

Gas air compressors do not require a direct connection to the electrical grid, unlike electric air compressors. This independence from the electrical grid allows gas air compressors to be used in remote locations, such as wilderness areas, remote job sites, or off-grid locations, where it may be impractical or cost-prohibitive to establish electrical infrastructure.

2. Mobility and Portability:

Gas air compressors are designed to be portable and easy to transport. They are often equipped with handles, wheels, or trailers, making them suitable for remote locations. The gas engine powering the compressor provides mobility, allowing the compressor to be moved to different areas within the remote location as needed.

3. Fuel Versatility:

Gas air compressors can be fueled by various types of combustible gases, including gasoline, diesel, natural gas, or propane. This fuel versatility ensures that gas air compressors can adapt to the available fuel sources in remote locations. For example, if gasoline or diesel is readily available, the gas air compressor can be fueled with these fuels. Similarly, if natural gas or propane is accessible, the compressor can be configured to run on these gases.

4. On-Site Power Generation:

In remote locations where electricity is limited, gas air compressors can serve as on-site power generators. They can power not only the compressor itself but also other equipment or tools that require electricity for operation. This versatility makes gas air compressors useful for a wide range of applications in remote locations, such as powering lights, tools, communication devices, or small appliances.

5. Off-Grid Operations:

Gas air compressors enable off-grid operations, allowing tasks and activities to be carried out in remote locations without relying on external power sources. This is particularly valuable in industries such as mining, oil and gas exploration, forestry, or construction, where operations may take place in remote and isolated areas. Gas air compressors provide the necessary compressed air for pneumatic tools, drilling equipment, and other machinery required for these operations.

6. Emergency Preparedness:

Gas air compressors are also beneficial for emergency preparedness in remote locations. In situations where natural disasters or emergencies disrupt the power supply, gas air compressors can provide a reliable source of compressed air for essential equipment and systems. They can power emergency lighting, communication devices, medical equipment, or backup generators, ensuring operational continuity in critical situations.

7. Adaptability to Challenging Environments:

Gas air compressors are designed to withstand various environmental conditions, including extreme temperatures, humidity, dust, and vibrations. This adaptability to challenging environments makes them suitable for use in remote locations, where environmental conditions may be harsh or unpredictable.

Overall, gas air compressors can be effectively used in remote locations due to their independence from the electrical grid, mobility, fuel versatility, on-site power generation capabilities, suitability for off-grid operations, emergency preparedness, and adaptability to challenging environments. These compressors provide a reliable source of compressed air, enabling a wide range of applications in remote settings.

China best Low Pressure Industrial Electric Oil Free Small Silent Rotary Gas Station Compressor   with high qualityChina best Low Pressure Industrial Electric Oil Free Small Silent Rotary Gas Station Compressor   with high quality
editor by CX 2024-04-10

China Custom Electric Low-Pressure Rotary Screw Air Compressor Cheap Price CHINAMFG Compresor De Aire 5bar Industrial Air Compressor with Good quality

Product Description

 Low Pressure Screw Air Compressor

♦ Intelligent Touch-Screen Design

♦ Direct-driven

♦ Air Cooling

♦ Oil Filter

♦ Air Filter 

♦ Stainless Steel

♦ Piping Design

Product Features

1.Specially designed PM motor.

2.Enhanced energy savings.

3.Low Energy Consumption,Low running,maintenance cost.

4.Aptitude and intelligent Control, integrated touch-screen PLC displayer.

5.Unique safe units make whole compressor more safety, more stable,lest noise,lest energy Loss.

6.Easy to install,operate,maintain.

Specially designed PM motor:

The PM motor efficiency is even higher than IE3 premium efficiency motors. The motor uses high performance magnetic materials giving many advantages such as bearing free operation, grease free maintenance, direct 1:1 coupling without transmission losses, low noise and low vibration leading to a compact structure.

Enhanced Energy Savings:

When demand is low the PM low pressure compressor firstly reduces the speed to maintain the correct flow demand. If the air demand stops the compressor enters standby mode, saving further energy. The compressor automatically restarts and runs when the pressure drops below its setpoint.

The latest generation intelligent touchscreen controller:

SCR’s latest touchscreen interface allows simple intelligent control for your compressor. Pressure and scheduling times can be easily programmed allowing you to automatically start and stop the compressor to match production times. Remote operation and real time monitoring are built in the controller as standard.

Specially designed oil pipe system:

The oil system has been specially designed to reduce maintenance downtime and extend the periods between maintenance visits.

Model Pressure
(mpa)
Displacement
(m3/min)
Power
(kw)
Dimension
(mm)
Weight
(kg)
Air Outlet
LPS-0.5/15 0.5 3.87 15 900*1150*1260 610 G1 1/2″
LPS-0.3/22 0.3 7.16 22 1550*980*1360 840 G2″
LPS-0.5/22 0.5 6.3 900*1150*1260 690
LPS-0.3/30 0.3 9.2 30 1680*1050*1395 890 G2″
LPS-0.5/30 0.5 8.22 1550*980*1360 840
LPS-0.3/37 0.3 12.1 37 1800*1250*1600 1740 DN65
LPS-0.5/37 0.5 9.8 1680*1050*1395 890
LPS-0.3/45 0.3 15 45 2571*1250*1650 1810
LPS-0.5/45 0.5 12 1800*1250*1600 1740
LPS-0.3/55 0.3 19.3 55 2571*1250*1650 1920 DN80
LPS-0.5/55 0.5 15 2571*1250*1650 1810
LPS-0.3/75 0.3 24.7 75 2500*1600*1800 3110
LPS-0.5/75 0.5 19.1 2571*1250*1650 1920
LPS-0.3/90 0.3 28.8 90 2500*1600*1800 3230 DN100
LPS-0.5/90 0.5 21.5 2500*1600*1800 3110
LPS-0.3/110 0.3 33 110 3100*1550*2200 3350
LPS-0.5/110 0.5 28.8 2500*1600*1800 3230
LPS-0.3/132 0.3 45.5 132 3100*1550*2200 4350 DN125
LPS-0.5/132 0.5 34.7 2770*2050*2200 3570
LPS-0.3/160 0.3 47 160 2900*1860*2000 4700
LPS-0.5/160 0.5 41.2 2770*2050*2200 4550
LPS-0.3/185 0.3 50 185 2900*1860*2000 4770
LPS-0.5/185 0.5 47.4 2770*2050*2200 4550
LPS-0.3/200 0.3 55.7 200 2900*1860*2000 4880
LPS-0.5/200 0.5 51.5 2770*2050*2200 4550

ZheJiang CHINAMFG Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
    1.1 Oil-free screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3.Portable air compressor & Mining Equipment
    3.1 Diesel or Electric portable screw air compressor
    3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
    4.1 CHINAMFG or Adsorption compressed air drier
    4.2 Compressed air filter or tank
    4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q: How can we start order with your factory?
A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.

Q: What are your MOQ?
A: Different products have different MOQ, most is 1 set.

Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Do you a trade company or real factory?
A: We are 100% factory; we located in ZheJiang city, China. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 1 Years
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type
Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

Are There Oil-Free Screw Compressors Available?

Yes, oil-free screw compressors are available in the market to cater to applications where oil contamination is a concern. Here’s a detailed explanation:

Oil-free screw compressors, as the name suggests, are designed to operate without the use of lubricating oil in the compression chamber. These compressors offer several advantages in industries where oil-free compressed air or gas is required, such as in food and beverage, pharmaceutical, electronics, and certain manufacturing processes.

The key features and considerations of oil-free screw compressors include:

  • 1. Specialized Design: Oil-free screw compressors are designed with specialized materials, coatings, and sealing systems to eliminate the need for lubricating oil in the compression process. The rotors and other internal components are constructed to ensure minimal friction and wear, even in the absence of oil.
  • 2. Dry Compression: Unlike lubricated screw compressors, oil-free screw compressors rely on dry compression methods. The compression chamber is designed to achieve compression without the presence of oil, ensuring that the discharged air or gas is free from oil contaminants. This is particularly critical in industries where oil contamination can have detrimental effects on product quality or equipment performance.
  • 3. Sealing Technology: Oil-free screw compressors employ advanced sealing technologies to prevent air or gas leakage between the high-pressure and low-pressure sides of the compressor. These sealing systems ensure efficient compression while maintaining the required clearances between the rotors and the compressor housing.
  • 4. Cooling Systems: Oil-free screw compressors utilize alternative cooling methods, such as air or water cooling, to dissipate the heat generated during compression. Efficient cooling is crucial to prevent overheating and ensure reliable operation.
  • 5. Filtration Systems: Oil-free compressors often incorporate high-quality filtration systems to remove particulates, moisture, and other contaminants from the incoming air or gas. These filtration systems help maintain the integrity of the compressor and ensure the delivery of clean, oil-free compressed air or gas.
  • 6. Application-Specific Solutions: Oil-free screw compressors are available in various sizes and configurations to meet specific application requirements. They can be tailored to deliver the desired air or gas flow rates, pressures, and purity levels.

It’s important to note that oil-free screw compressors generally have higher initial costs compared to lubricated compressors due to their specialized design and materials. However, they offer benefits such as reduced maintenance, minimized risk of oil contamination, and compliance with stringent industry standards or regulations.

When considering an oil-free screw compressor, it’s crucial to assess the specific application needs, air quality requirements, and operating conditions. Consulting with manufacturers or suppliers can help in selecting the most suitable oil-free screw compressor for a particular industry or process.

In summary, oil-free screw compressors are available and offer a reliable and efficient solution for applications where oil-free compressed air or gas is essential. These compressors are designed with specialized features to ensure dry compression, reliable sealing, effective cooling, and high-quality filtration.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

What Are the Key Components of a Screw Compressor?

A screw compressor consists of several key components that work together to compress air or gas. Here’s a detailed explanation of these components:

1. Male and Female Rotors:

The male and female rotors are the primary components of a screw compressor. These helical rotors have specially designed profiles that interlock with each other. The male rotor typically has fewer lobes or threads compared to the female rotor. As the rotors rotate, the interlocking lobes create compression chambers that gradually reduce in volume, compressing the air or gas.

2. Compression Chamber:

The compression chamber is formed by the interlocking lobes of the rotors. It is the space where the air or gas is compressed as the rotors rotate. The volume of the compression chamber decreases as the lobes move towards the discharge end, resulting in the compression of the trapped air or gas.

3. Inlet and Outlet Ports:

The inlet port is the entry point through which the air or gas enters the screw compressor. It is typically located at the suction side of the compressor. The inlet port allows the air or gas to flow into the compression chamber during the suction process. The outlet port is the exit point through which the compressed air or gas is discharged from the compressor.

4. Drive System:

The drive system of a screw compressor consists of a motor and a drive mechanism. The motor provides the rotational power required to drive the rotors. Common types of drive mechanisms include direct drive, belt drive, and gear drive. The drive system ensures that the rotors rotate in opposite directions at the desired speed and synchronization.

5. Oil System (in oil-injected compressors):

In oil-injected screw compressors, an oil system is present to provide lubrication, cooling, and sealing between the rotors. The oil system typically includes an oil reservoir, an oil pump, oil filters, and oil coolers. The lubricating oil is injected into the compression chamber, where it forms a thin film on the rotors, reducing friction and minimizing wear.

6. Cooling System:

Screw compressors often incorporate a cooling system to maintain optimal operating temperatures. The cooling system may include air or water-cooled heat exchangers, which dissipate the heat generated during compression. Cooling ensures that the compressor operates within safe temperature limits, preventing overheating and prolonging the lifespan of the components.

7. Control System:

A control system is an essential component of a screw compressor, providing monitoring and regulation of various parameters. It may include sensors, controllers, and safety devices to measure and control variables such as pressure, temperature, and operating conditions. The control system ensures efficient and safe operation of the screw compressor.

8. Sound Attenuation and Vibration Isolation:

To reduce noise and vibration, screw compressors are often equipped with sound attenuation measures and vibration isolation systems. These components help in minimizing the noise and vibrations generated during operation, making the compressor suitable for noise-sensitive environments.

In summary, the key components of a screw compressor include the male and female rotors, compression chamber, inlet and outlet ports, drive system, oil system (in oil-injected compressors), cooling system, control system, and sound attenuation/vibration isolation components. These components work together to enable the efficient compression of air or gas in the screw compressor.

China Custom Electric Low-Pressure Rotary Screw Air Compressor Cheap Price CHINAMFG Compresor De Aire 5bar Industrial Air Compressor   with Good qualityChina Custom Electric Low-Pressure Rotary Screw Air Compressor Cheap Price CHINAMFG Compresor De Aire 5bar Industrial Air Compressor   with Good quality
editor by CX 2024-04-04

China OEM Electric Silent Oil Free Screw Type 45kw Air Compressor with CHINAMFG for Industrial air compressor for sale

Product Description

Electric silent oil free screw type  45kw air compressor with CHINAMFG for Industrial

 

Product Description

Product features:
  LG-12/2 screw air compressor is mainly used in material conveying, textile industry and other low-pressure gas sector industries, compared with the traditional piston type, pendulum type and other air compressors, with a long continuous operation time, no human care, stable operation, high reliability, low failure rate, low noise advantages, in actual use will bring users a very high economic and environmental benefits.
 
 1, the overall design of air compressor:
LG-12/2 screw air compressor is composed of the bottom frame, which is reasonably arranged and installed: distribution box, motor, screw machine head, hot oil pump, oil cooler, oil and gas separator, protective silencer housing and other components (can be selected according to customers).
2. Control system:
The control system adopts HangZhou MAM880 screw air compressor microcomputer controller, and the main motor is started by star triangle. The whole control system is equipped with temperature sensor, pressure sensor, air intake valve, minimum pressure valve, safety valve, check valve, etc., to achieve the optimal accessories, reasonable configuration, automatic control, smooth operation, safe and reliable.
The main advantage of this type of screw air compressor is that in order to ensure the safe and reliable operation of the screw machine, the design selects the most reliable hot oil pump in China, so that the screw machine can ensure the normal circulation of the system cooling oil at any time!

 

Detailed Photos

 

Product Parameters

Main specifications and technical parameters
(1) Exhaust pressure: 0.2MPa;
(2) Exhaust volume: 12m³/min;
(3) Main motor power: 45kw;
(4) Screw model number: CHINAMFG brand
(5) Work nature: continuous work;
(6) Noise: ≤85dB(A);
(7) Overall size: 2030*1060*1420mm;
(8) Machine weight: 700 kg.

 

 

Company Profile

   Rongheng times (ZheJiang ) International Trade Services Co. , Ltd. is mainly engaged in the Air compressor and special purpose vehicles.
    Air compressor including oil-free lubrication pendulum air compressor and screw air compressor 2 series of more than 20 kinds of products. As a manufacturer of Compressed air systems, the company has always advocated for customized Compressed air solutions and long-term quality services for specific industry applications.
    The leading products of special vehicles are tank-type special vehicles, which include fluid material transport equipment such as concrete mixer, powder material transport vehicles, liquid transport vehicles, and special equipment for sanitation and animal husbandry, at present, the annual production capacity of more than 10,000 units.

Our Advantages

 The products cover 31 provinces, cities and autonomous regions, and export to more than 50 countries and regions.
    Get Quality Products to you faster and better.
 

FAQ

Q1. Do you test all your goods before delivery?
A1: Yes, we have 100% test before delivery
Q2. What is your terms of delivery?
A2: EXW, FOB, CFR, CIF, DDU…As for the payment terms,it depends on the total amount.
Q3. What is the average delivery time?
A3: Usually takes about 10-20 days . The specific delivery time depends on the items and the quantity of your order.
Q4. What is the Payment term?
A4: By T/T before shipment or By L/C at sight.
Q5. During shipping, if there is a damage to products, how do you get replacement?
A5:Firstly, we should investigate the reason cause the damage. At the same time, we will claim for the insurance by ourselves or assist the buyer. Secondly we will send the replacement to the buyer. The responsible person for above damage will take charge of the cost of the replacement.
 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: on-Line 7*24h
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

air compressor

What Is the Noise Level of Screw Compressors?

The noise level of screw compressors can vary depending on several factors, including the compressor’s size, design, operating conditions, and the presence of noise-reducing features. Here’s a detailed explanation:

Screw compressors are known for their relatively low noise levels compared to other types of compressors, such as reciprocating compressors. However, the actual noise level can still vary depending on the specific compressor model and its operating parameters.

The noise level of screw compressors is typically measured in decibels (dB) and can range from around 60 dB to 90 dB or higher. It’s important to note that the noise level is logarithmic, meaning that a small increase in decibel level represents a significant increase in perceived noise intensity.

Several factors can influence the noise level of screw compressors:

  • 1. Compressor Size and Design: Larger screw compressors tend to produce higher noise levels compared to smaller ones. This is because larger compressors generally have more powerful motors and larger rotating components, which can generate more noise. The design of the compressor, including the type of rotor profiles and the presence of noise-reducing features, can also impact the noise level.
  • 2. Operating Conditions: The operating conditions of the compressor, such as the speed of rotation and the discharge pressure, can affect the noise level. Higher speeds and pressures may result in increased noise production. Additionally, the presence of pulsations or vibrations in the system can contribute to noise generation.
  • 3. Sound Insulation and Enclosures: Some screw compressors come with built-in sound insulation or enclosures to reduce noise levels. These features help contain the noise within the compressor unit and minimize the propagation of noise to the surrounding environment. Compressors equipped with sound insulation or enclosures generally have lower noise levels compared to open-frame compressors.
  • 4. Installation and Surrounding Environment: The installation of the compressor and the characteristics of the surrounding environment can influence the perceived noise level. Factors such as the proximity of the compressor to sensitive areas, the presence of sound-absorbing materials, and the layout of the facility can impact the noise propagation and overall noise perception.
  • 5. Maintenance and Wear: Proper maintenance of the compressor, including regular inspection and lubrication of components, can help minimize noise levels. Wear and tear on the compressor’s internal parts can lead to increased noise production, so timely repairs or component replacements are important to maintain optimal performance and minimize noise.

It’s worth noting that noise levels are typically provided by manufacturers as specifications for each compressor model. These specifications can help users select compressors with noise levels that meet their specific requirements or comply with local noise regulations.

In summary, the noise level of screw compressors can range from around 60 dB to 90 dB or higher, depending on factors such as compressor size, design, operating conditions, and the presence of noise-reducing features. Proper installation, maintenance, and the use of sound insulation or enclosures can help minimize noise levels and create a more comfortable and quieter operating environment.

air compressor

How Do You Maintain the Air Quality in a Screw Compressor System?

Maintaining air quality in a screw compressor system is crucial to ensure the performance, efficiency, and reliability of the compressed air. Here’s a detailed explanation:

1. Proper Intake Filtration:

Install high-quality intake filters to prevent contaminants, such as dust, dirt, and debris, from entering the screw compressor system. These filters should have an appropriate filtration rating to effectively capture particles of the desired size. Regularly inspect and clean or replace the intake filters to maintain their effectiveness.

2. Compressed Air Dryers:

Use compressed air dryers, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air. Moisture can lead to corrosion, damage to pneumatic equipment, and compromised air quality. The type of dryer selected depends on the specific application requirements and the desired level of moisture removal.

3. Oil Removal Filters:

In oil-injected screw compressors, oil is used for lubrication, which can contaminate the compressed air. Install oil removal filters downstream of the compressor to remove any oil carryover from the compressed air. These filters typically use coalescing technology to separate and trap oil particles, ensuring clean air quality.

4. Condensate Management:

Effectively manage condensate, which is formed when moisture in the compressed air condenses as it cools. Install condensate drains and separators to remove and properly dispose of condensate. Improper condensate management can lead to water contamination in the compressed air system.

5. Regular Maintenance:

Perform regular maintenance tasks as recommended by the manufacturer, including oil changes, filter replacements, and inspections. Proper maintenance helps ensure that the compressor system operates efficiently and minimizes the risk of contaminants entering the compressed air.

6. Air Receiver Tank Maintenance:

If the screw compressor system includes an air receiver tank, regularly inspect and clean the tank to remove any accumulated debris or contaminants. Additionally, ensure that the tank’s drain valve is functioning correctly to remove any water or condensate from the tank.

7. Leak Detection and Repair:

Regularly inspect the compressed air system for leaks. Leaks not only waste energy but also allow contaminants from the surrounding environment to enter the system. Use appropriate leak detection methods, such as ultrasonic detectors or soapy water solutions, to identify and promptly repair any leaks.

8. Monitor and Control Operating Conditions:

Monitor and maintain proper operating conditions within the screw compressor system. This includes monitoring discharge pressure, temperature, and other relevant parameters to ensure they are within acceptable ranges. Implement appropriate control strategies, such as regulating compressor capacity or adjusting dryer settings, to optimize air quality while meeting the specific application requirements.

9. Training and Awareness:

Provide training to operators and maintenance personnel on the importance of air quality in a screw compressor system. Ensure they understand proper maintenance procedures, the significance of filtration, and how to identify and address potential air quality issues.

10. Compliance with Regulations:

Be aware of and comply with relevant regulations and standards governing air quality in your specific industry or application. This may include adherence to guidelines such as ISO 8573, which specifies air purity classes for different contaminants in compressed air systems.

By following these practices, you can maintain the air quality in a screw compressor system, ensuring clean, reliable, and high-quality compressed air for various applications.

air compressor

Are There Different Types of Screw Compressors?

Yes, there are different types of screw compressors available, catering to various application requirements. Here’s an overview of the main types:

1. Oil-Injected Screw Compressors:

Oil-injected screw compressors, also known as lubricated screw compressors, are the most common type. These compressors require the injection of a small amount of lubricating oil into the compression chamber. The oil serves multiple purposes, including lubrication, cooling, sealing, and reducing friction between the rotors. Oil-injected screw compressors are widely used in industrial applications where a small amount of oil in the compressed air is acceptable.

2. Oil-Free Screw Compressors:

Oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors incorporate specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and eliminate the need for oil. Oil-free screw compressors are preferred in applications that require oil-free and contaminant-free compressed air. Industries like food and beverage, pharmaceuticals, electronics, and others often rely on oil-free screw compressors to ensure the purity of the compressed air.

3. Variable Speed Drive (VSD) Screw Compressors:

VSD screw compressors, also known as variable frequency drive (VFD) screw compressors, are equipped with a variable speed drive system. This system allows the compressor to adjust the rotational speed of the motor and, consequently, the speed of the screw rotors. By varying the speed, VSD screw compressors can closely match the compressed air or gas demand, resulting in energy savings and improved efficiency. VSD screw compressors are particularly beneficial in applications with varying air demand, as they can adapt their output accordingly.

4. Two-Stage Screw Compressors:

Two-stage screw compressors consist of two sets of rotors arranged in series. The first stage compresses the air or gas to an intermediate pressure, and the second stage further compresses it to the desired final pressure. Two-stage screw compressors are commonly used in applications that require higher discharge pressures. By dividing the compression into two stages, these compressors can achieve higher efficiency and improved performance in high-pressure applications.

5. Water-Injected Screw Compressors:

Water-injected screw compressors, also known as liquid-injected screw compressors, utilize water or a water-glycol mixture as a sealing and cooling medium. The water injection helps in sealing the compression chamber and reduces the discharge temperature, enhancing the compressor’s efficiency. Water-injected screw compressors are often used in applications where oil contamination is a concern, such as in the pharmaceutical and food processing industries.

Each type of screw compressor has its own advantages and is suitable for specific applications. The choice of the screw compressor type depends on factors such as the desired level of air purity, the need for oil-free operation, energy efficiency requirements, and the operating conditions of the application.

China OEM Electric Silent Oil Free Screw Type 45kw Air Compressor with CHINAMFG for Industrial   air compressor for saleChina OEM Electric Silent Oil Free Screw Type 45kw Air Compressor with CHINAMFG for Industrial   air compressor for sale
editor by CX 2024-04-03

China Standard Focus 75kw Electric Portable Mini Screw Air Compressor for Sale manufacturer

Product Description

Focus 75kw Electric Portable Mini Screw Air Compressor for Sale

*High Efficiency
*Strong motor
*Low Noise Level
*Easy operation and maintenance

PRODUCT DESCRIPTION                                                                                               
1. Strong motor
High efficiency   Low noise   Stable operation
2. Oil and gas separator
High temperature resistance
Make oil-less

3. Air filter

Prolong the operation life of the host
To filter mini CHINAMFG particles in the air effectively
4. Oil filter
Keep host clean and efficient
To filter impurities of lubricating oil effectively
5. Cooler fan
Fast heat dissipation  Large air volume
Prevent machine from high temperature effectively

6. PLC

Convenient button  Easy operation
Equipped with alarm function and active protection

7. PM motor rotor

High efficiency High pressure resistance
8. Hook design
Easy to move, adapt to various environments
PARAMETER                                                                                                                    
Focus 75kw Electric Portable Mini Screw Air Compressor for Sale

Power 75kw
Voltage 380V
Air flow capacity 13m3/min
Weight 1900kg
Cooing system air cooling
Driving type Direct
Wheels 4
Dimension 3000*1350*1950mm
Outlet diameter 1-G1/2,1-G2

COMPANY DESCRIPTION                                                                                              
Established in 1982, HangZhou Focus Machinery Co., Ltd. is the explorer and by far the biggest professional construction machinery manufacturer in HangZhou, China. 

We mainly manufacture concrete batching plant, mobile concrete mixing plant, twin-shaft concrete mixer, small rotary concrete mixer, compulsory asphalt mixing plant, asphalt drum mixing plant, mobile asphalt plant, trailer concrete pump, concrete pump with mixer, dry CHINAMFG mixing plant, truck mounted concrete pump, concrete truck mixer, tower crane, construction hoist, cement bag splitter and pneumatic conveyor, etc.

Focus 75kw Electric Portable Mini Screw Air Compressor for Sale
FOCUS_BUILT A BETTER WORLD
CONTACT US NOW!! /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Overseas Service Center with Sufficient Engineers
Warranty: 12 Months
Lubrication Style: Oil-less
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical

air compressor

How Do You Select the Right Size Screw Compressor for Your Needs?

Choosing the right size screw compressor is crucial to ensure optimal performance, energy efficiency, and cost-effectiveness for your specific compressed air or gas requirements. Here’s a detailed explanation of the selection process:

Selecting the right size screw compressor involves considering several key factors:

  • 1. Air or Gas Demand: Determine your compressed air or gas demand by assessing the total required flow rate (measured in cubic feet per minute or liters per second) and the operating pressure (measured in pounds per square inch or bar). This information helps establish the compressor’s capacity requirements.
  • 2. Duty Cycle: Evaluate your operation’s duty cycle, which refers to the percentage of time the compressor will be running. Duty cycles can vary from continuous operation to intermittent or seasonal usage. The duty cycle affects the compressor’s sizing, as it determines the required compressor output and influences the compressor’s cooling and maintenance needs.
  • 3. Ambient Conditions: Consider the environmental conditions in which the compressor will operate. Factors such as temperature, humidity, and altitude can impact the compressor’s performance and cooling requirements. Ensure that the selected compressor is suitable for the specific ambient conditions of your facility.
  • 4. System Pressure Requirements: Determine the minimum and maximum operating pressure requirements for your application. This information is essential in selecting a compressor that can consistently deliver the required pressure range throughout its operating range.
  • 5. Efficiency Considerations: Evaluate the energy efficiency of different compressor models. Look for compressors with high energy efficiency ratings, such as those certified by organizations like the Air Compressor and Gas Association (CAGI) or ENERGY STAR. Energy-efficient compressors can significantly reduce operating costs over the equipment’s lifespan.
  • 6. Future Expansion: Consider any anticipated growth or changes in your compressed air or gas demand. If you expect increased demand in the future, it’s advisable to select a compressor with some extra capacity to accommodate future expansion without requiring immediate replacement.
  • 7. Maintenance and Serviceability: Assess the maintenance requirements and serviceability of different compressor models. Look for features that make routine maintenance tasks, such as filter changes or oil checks, easily accessible and convenient. Consider the availability of service technicians and spare parts for the chosen compressor brand or model.
  • 8. Manufacturer and Supplier Support: Research the reputation and track record of compressor manufacturers and suppliers. Choose established brands known for producing reliable, high-quality equipment. Consider factors such as warranty coverage, technical support availability, and the proximity of service centers.

Once you have gathered the necessary information and considered the factors mentioned above, you can consult with compressor manufacturers or suppliers who can provide expert advice and assist in selecting the right size screw compressor for your specific needs. They can perform detailed calculations, taking into account the factors discussed, to recommend a compressor that matches your requirements and provides optimal performance.

It’s important to note that selecting the right size screw compressor is a critical decision, and professional guidance is highly recommended to ensure an accurate assessment and proper matching of the compressor to your specific needs.

In summary, selecting the right size screw compressor involves assessing your compressed air or gas demand, duty cycle, ambient conditions, pressure requirements, efficiency considerations, future expansion plans, maintenance requirements, and manufacturer support. By considering these factors and seeking expert advice, you can choose a screw compressor that meets your needs and delivers reliable, efficient performance.

air compressor

How Do You Maintain the Air Quality in a Screw Compressor System?

Maintaining air quality in a screw compressor system is crucial to ensure the performance, efficiency, and reliability of the compressed air. Here’s a detailed explanation:

1. Proper Intake Filtration:

Install high-quality intake filters to prevent contaminants, such as dust, dirt, and debris, from entering the screw compressor system. These filters should have an appropriate filtration rating to effectively capture particles of the desired size. Regularly inspect and clean or replace the intake filters to maintain their effectiveness.

2. Compressed Air Dryers:

Use compressed air dryers, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air. Moisture can lead to corrosion, damage to pneumatic equipment, and compromised air quality. The type of dryer selected depends on the specific application requirements and the desired level of moisture removal.

3. Oil Removal Filters:

In oil-injected screw compressors, oil is used for lubrication, which can contaminate the compressed air. Install oil removal filters downstream of the compressor to remove any oil carryover from the compressed air. These filters typically use coalescing technology to separate and trap oil particles, ensuring clean air quality.

4. Condensate Management:

Effectively manage condensate, which is formed when moisture in the compressed air condenses as it cools. Install condensate drains and separators to remove and properly dispose of condensate. Improper condensate management can lead to water contamination in the compressed air system.

5. Regular Maintenance:

Perform regular maintenance tasks as recommended by the manufacturer, including oil changes, filter replacements, and inspections. Proper maintenance helps ensure that the compressor system operates efficiently and minimizes the risk of contaminants entering the compressed air.

6. Air Receiver Tank Maintenance:

If the screw compressor system includes an air receiver tank, regularly inspect and clean the tank to remove any accumulated debris or contaminants. Additionally, ensure that the tank’s drain valve is functioning correctly to remove any water or condensate from the tank.

7. Leak Detection and Repair:

Regularly inspect the compressed air system for leaks. Leaks not only waste energy but also allow contaminants from the surrounding environment to enter the system. Use appropriate leak detection methods, such as ultrasonic detectors or soapy water solutions, to identify and promptly repair any leaks.

8. Monitor and Control Operating Conditions:

Monitor and maintain proper operating conditions within the screw compressor system. This includes monitoring discharge pressure, temperature, and other relevant parameters to ensure they are within acceptable ranges. Implement appropriate control strategies, such as regulating compressor capacity or adjusting dryer settings, to optimize air quality while meeting the specific application requirements.

9. Training and Awareness:

Provide training to operators and maintenance personnel on the importance of air quality in a screw compressor system. Ensure they understand proper maintenance procedures, the significance of filtration, and how to identify and address potential air quality issues.

10. Compliance with Regulations:

Be aware of and comply with relevant regulations and standards governing air quality in your specific industry or application. This may include adherence to guidelines such as ISO 8573, which specifies air purity classes for different contaminants in compressed air systems.

By following these practices, you can maintain the air quality in a screw compressor system, ensuring clean, reliable, and high-quality compressed air for various applications.

air compressor

Are There Different Types of Screw Compressors?

Yes, there are different types of screw compressors available, catering to various application requirements. Here’s an overview of the main types:

1. Oil-Injected Screw Compressors:

Oil-injected screw compressors, also known as lubricated screw compressors, are the most common type. These compressors require the injection of a small amount of lubricating oil into the compression chamber. The oil serves multiple purposes, including lubrication, cooling, sealing, and reducing friction between the rotors. Oil-injected screw compressors are widely used in industrial applications where a small amount of oil in the compressed air is acceptable.

2. Oil-Free Screw Compressors:

Oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors incorporate specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and eliminate the need for oil. Oil-free screw compressors are preferred in applications that require oil-free and contaminant-free compressed air. Industries like food and beverage, pharmaceuticals, electronics, and others often rely on oil-free screw compressors to ensure the purity of the compressed air.

3. Variable Speed Drive (VSD) Screw Compressors:

VSD screw compressors, also known as variable frequency drive (VFD) screw compressors, are equipped with a variable speed drive system. This system allows the compressor to adjust the rotational speed of the motor and, consequently, the speed of the screw rotors. By varying the speed, VSD screw compressors can closely match the compressed air or gas demand, resulting in energy savings and improved efficiency. VSD screw compressors are particularly beneficial in applications with varying air demand, as they can adapt their output accordingly.

4. Two-Stage Screw Compressors:

Two-stage screw compressors consist of two sets of rotors arranged in series. The first stage compresses the air or gas to an intermediate pressure, and the second stage further compresses it to the desired final pressure. Two-stage screw compressors are commonly used in applications that require higher discharge pressures. By dividing the compression into two stages, these compressors can achieve higher efficiency and improved performance in high-pressure applications.

5. Water-Injected Screw Compressors:

Water-injected screw compressors, also known as liquid-injected screw compressors, utilize water or a water-glycol mixture as a sealing and cooling medium. The water injection helps in sealing the compression chamber and reduces the discharge temperature, enhancing the compressor’s efficiency. Water-injected screw compressors are often used in applications where oil contamination is a concern, such as in the pharmaceutical and food processing industries.

Each type of screw compressor has its own advantages and is suitable for specific applications. The choice of the screw compressor type depends on factors such as the desired level of air purity, the need for oil-free operation, energy efficiency requirements, and the operating conditions of the application.

China Standard Focus 75kw Electric Portable Mini Screw Air Compressor for Sale   manufacturer China Standard Focus 75kw Electric Portable Mini Screw Air Compressor for Sale   manufacturer
editor by CX 2024-03-03

China Professional 0.8MPa Electric Screw Type Air Compressor for Mining air compressor for sale

Product Description

0.8mpa Electric screw type air compressor for mining

*High Efficiency
*Strong motor
*Low Noise Level
*Easy operation and maintenance

PRODUCT DESCRIPTION                                                                                               
1. Strong motor
High efficiency   Low noise   Stable operation
2. Oil and gas separator
High temperature resistance
Make oil-less

3. Air filter

Prolong the operation life of the host
To filter mini CHINAMFG particles in the air effectively
4. Oil filter
Keep host clean and efficient
To filter impurities of lubricating oil effectively

Power 75kw
Voltage 380V
Air flow capacity 13m3/min
Weight 1900kg
Cooing system air cooling
Driving type Direct
Wheels 4
Dimension 3000*1350*1950mm
Outlet diameter 1-G1/2,1-G2

5. Cooler fan
Fast heat dissipation  Large air volume
Prevent machine from high temperature effectively

6. PLC

Convenient button  Easy operation
Equipped with alarm function and active protection

7. PM motor rotor

High efficiency High pressure resistance
8. Hook design
Easy to move, adapt to various environments
PACKAGE                                                                                                                         
0.8mpa Electric screw type air compressor for mining
Export standard wooden crate or film wrapping, as your request.

 

 

COMPANY DESCRIPTION                                                                                              
Established in 1982, HangZhou Focus Machinery Co., Ltd. is the explorer and by far the biggest professional construction machinery manufacturer in HangZhou, China. 

We mainly manufacture concrete batching plant, mobile concrete mixing plant, twin-shaft concrete mixer, small rotary concrete mixer, compulsory asphalt mixing plant, asphalt drum mixing plant, mobile asphalt plant, trailer concrete pump, concrete pump with mixer, dry CHINAMFG mixing plant, truck mounted concrete pump, concrete truck mixer, tower crane, construction hoist, cement bag splitter and pneumatic conveyor, etc.

0.8mpa Electric screw type air compressor for mining
FOCUS_BUILT A BETTER WORLD
CONTACT US NOW!! /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Overseas Service Center with Sufficient Engineers
Warranty: 12 Months
Lubrication Style: Oil-less
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical

air compressor

How Do You Select the Right Size Screw Compressor for Your Needs?

Choosing the right size screw compressor is crucial to ensure optimal performance, energy efficiency, and cost-effectiveness for your specific compressed air or gas requirements. Here’s a detailed explanation of the selection process:

Selecting the right size screw compressor involves considering several key factors:

  • 1. Air or Gas Demand: Determine your compressed air or gas demand by assessing the total required flow rate (measured in cubic feet per minute or liters per second) and the operating pressure (measured in pounds per square inch or bar). This information helps establish the compressor’s capacity requirements.
  • 2. Duty Cycle: Evaluate your operation’s duty cycle, which refers to the percentage of time the compressor will be running. Duty cycles can vary from continuous operation to intermittent or seasonal usage. The duty cycle affects the compressor’s sizing, as it determines the required compressor output and influences the compressor’s cooling and maintenance needs.
  • 3. Ambient Conditions: Consider the environmental conditions in which the compressor will operate. Factors such as temperature, humidity, and altitude can impact the compressor’s performance and cooling requirements. Ensure that the selected compressor is suitable for the specific ambient conditions of your facility.
  • 4. System Pressure Requirements: Determine the minimum and maximum operating pressure requirements for your application. This information is essential in selecting a compressor that can consistently deliver the required pressure range throughout its operating range.
  • 5. Efficiency Considerations: Evaluate the energy efficiency of different compressor models. Look for compressors with high energy efficiency ratings, such as those certified by organizations like the Air Compressor and Gas Association (CAGI) or ENERGY STAR. Energy-efficient compressors can significantly reduce operating costs over the equipment’s lifespan.
  • 6. Future Expansion: Consider any anticipated growth or changes in your compressed air or gas demand. If you expect increased demand in the future, it’s advisable to select a compressor with some extra capacity to accommodate future expansion without requiring immediate replacement.
  • 7. Maintenance and Serviceability: Assess the maintenance requirements and serviceability of different compressor models. Look for features that make routine maintenance tasks, such as filter changes or oil checks, easily accessible and convenient. Consider the availability of service technicians and spare parts for the chosen compressor brand or model.
  • 8. Manufacturer and Supplier Support: Research the reputation and track record of compressor manufacturers and suppliers. Choose established brands known for producing reliable, high-quality equipment. Consider factors such as warranty coverage, technical support availability, and the proximity of service centers.

Once you have gathered the necessary information and considered the factors mentioned above, you can consult with compressor manufacturers or suppliers who can provide expert advice and assist in selecting the right size screw compressor for your specific needs. They can perform detailed calculations, taking into account the factors discussed, to recommend a compressor that matches your requirements and provides optimal performance.

It’s important to note that selecting the right size screw compressor is a critical decision, and professional guidance is highly recommended to ensure an accurate assessment and proper matching of the compressor to your specific needs.

In summary, selecting the right size screw compressor involves assessing your compressed air or gas demand, duty cycle, ambient conditions, pressure requirements, efficiency considerations, future expansion plans, maintenance requirements, and manufacturer support. By considering these factors and seeking expert advice, you can choose a screw compressor that meets your needs and delivers reliable, efficient performance.

air compressor

What Is the Role of Control Systems in Screw Compressor Operation?

Control systems play a crucial role in the operation of screw compressors. Here’s a detailed explanation:

Screw compressors are complex machines that require precise control and monitoring for optimal performance and efficiency. Control systems provide the necessary intelligence and automation to regulate various aspects of screw compressor operation. Here are the key roles of control systems:

1. Start-up and Shutdown Control:

Control systems manage the start-up and shutdown sequences of screw compressors. During start-up, the control system ensures a gradual ramp-up of motor speed and system pressure to prevent sudden surges and excessive wear on components. During shutdown, it safely brings the compressor to a stop and performs necessary cooling and ventilation processes.

2. Load and Unload Control:

Screw compressors often feature load and unload operation to match compressed air supply with demand. The control system monitors system pressure, flow requirements, and other parameters to determine when to load or unload the compressor. It engages or disengages the compressor’s capacity control mechanism, such as inlet modulation valves or variable-speed drives, to maintain optimal operation at varying loads.

3. Pressure Control:

Control systems regulate the discharge pressure of screw compressors. They continuously monitor the system pressure and adjust compressor operation to maintain the desired pressure setpoint. The control system modulates the compressor’s capacity, adjusts the speed of the drive motor, or controls the opening and closing of inlet or discharge valves to achieve the target pressure.

4. Temperature Control:

Control systems monitor and control various temperature parameters within the screw compressor system. They ensure that the compressor operates within safe temperature limits by monitoring coolant temperatures, lubricant temperatures, and interstage or discharge temperatures. If temperature limits are exceeded, the control system may activate cooling mechanisms, adjust operating parameters, or trigger alarms and shutdowns to prevent damage.

5. Monitoring and Protection:

Control systems provide comprehensive monitoring and protection functions for screw compressors. They continuously collect data from various sensors and instruments, such as pressure sensors, temperature sensors, vibration sensors, and current sensors. The control system analyzes this data to detect abnormalities, malfunctions, or potential failures. It can initiate alarms, shutdowns, or safety interlocks to protect the compressor and associated equipment.

6. Energy Management:

Control systems optimize energy efficiency in screw compressor operation. They analyze system demand, performance characteristics, and energy consumption to make intelligent decisions regarding load modulation, capacity control, and motor speed adjustments. By optimizing the compressor’s operation, the control system helps reduce energy consumption, operating costs, and environmental impact.

7. Remote Monitoring and Control:

Modern control systems often offer remote monitoring and control capabilities. They can be integrated into supervisory control and data acquisition (SCADA) systems or connected to networked platforms. Remote access allows operators to monitor compressor performance, adjust operating parameters, receive alarms, and perform diagnostics from a central control room or via mobile devices.

In summary, control systems play a vital role in the operation of screw compressors by providing intelligent control, monitoring, and protection. They manage start-up and shutdown sequences, regulate load and unload operation, control pressure and temperature, monitor system parameters, optimize energy efficiency, and enable remote monitoring and control. By effectively managing the compressor’s operation, control systems contribute to reliable performance, energy efficiency, and overall system optimization.

air compressor

Are There Different Types of Screw Compressors?

Yes, there are different types of screw compressors available, catering to various application requirements. Here’s an overview of the main types:

1. Oil-Injected Screw Compressors:

Oil-injected screw compressors, also known as lubricated screw compressors, are the most common type. These compressors require the injection of a small amount of lubricating oil into the compression chamber. The oil serves multiple purposes, including lubrication, cooling, sealing, and reducing friction between the rotors. Oil-injected screw compressors are widely used in industrial applications where a small amount of oil in the compressed air is acceptable.

2. Oil-Free Screw Compressors:

Oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors incorporate specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and eliminate the need for oil. Oil-free screw compressors are preferred in applications that require oil-free and contaminant-free compressed air. Industries like food and beverage, pharmaceuticals, electronics, and others often rely on oil-free screw compressors to ensure the purity of the compressed air.

3. Variable Speed Drive (VSD) Screw Compressors:

VSD screw compressors, also known as variable frequency drive (VFD) screw compressors, are equipped with a variable speed drive system. This system allows the compressor to adjust the rotational speed of the motor and, consequently, the speed of the screw rotors. By varying the speed, VSD screw compressors can closely match the compressed air or gas demand, resulting in energy savings and improved efficiency. VSD screw compressors are particularly beneficial in applications with varying air demand, as they can adapt their output accordingly.

4. Two-Stage Screw Compressors:

Two-stage screw compressors consist of two sets of rotors arranged in series. The first stage compresses the air or gas to an intermediate pressure, and the second stage further compresses it to the desired final pressure. Two-stage screw compressors are commonly used in applications that require higher discharge pressures. By dividing the compression into two stages, these compressors can achieve higher efficiency and improved performance in high-pressure applications.

5. Water-Injected Screw Compressors:

Water-injected screw compressors, also known as liquid-injected screw compressors, utilize water or a water-glycol mixture as a sealing and cooling medium. The water injection helps in sealing the compression chamber and reduces the discharge temperature, enhancing the compressor’s efficiency. Water-injected screw compressors are often used in applications where oil contamination is a concern, such as in the pharmaceutical and food processing industries.

Each type of screw compressor has its own advantages and is suitable for specific applications. The choice of the screw compressor type depends on factors such as the desired level of air purity, the need for oil-free operation, energy efficiency requirements, and the operating conditions of the application.

China Professional 0.8MPa Electric Screw Type Air Compressor for Mining   air compressor for saleChina Professional 0.8MPa Electric Screw Type Air Compressor for Mining   air compressor for sale
editor by CX 2024-02-27

China OEM 30L Industrial Stationary Medical Oil Free Electric Direct Driven Screw Air Compressor with Good quality

Product Description

30L Industrial Stationary Medical Oil Free Electric Direct Driven Screw Air Compressor

Product Parameters

Name Direct driven Air Compressor
Applicable Industries Manufacturing Plant, Food & Beverage Factory, Printing Shops, Construction works , Food & Beverage Shops, Advertising Company
Showroom Location None
Machinery Test Report Provided
Video outgoing-inspection Provided
Marketing Type Other
Core Components Pressure vessel, Engine, Motor, Pump, Bearing
Gas Type     Air
Configuration PORTABLE
Power Source     AC POWER
Type PISTON
Lubrication Style Lubricated
Mute Yes
Voltage 220V
Dimension(L*W*H) 67*33*65
OEM Welcomed

 

Model name

Delivery rate at 0 bar

Max. pressure

  Tank

Nominal pressure

Motor input

Voltage

     Speed

XXL30V

380L/min

8 bar 115psi

30L

6 db(A)

2.2 KW

220 V

2800RPM

Product Display

Company Profile

Founded in 2002, ZHangZhoug CHINAMFG Electromechanical Co., Ltd. focus on manufacturing air compressors for more than 15 years.
Our company is located in Daxi Pump Industrial Area, HangZhou City, ZHangZhoug, China. having more than 15000 square meter working area. We specialize in all kinds of piston air compressors, especially having advantages in our new advanced heavy-duty oil-free
air compressors.

FAQ

Q1: Are you a factory or a trading company?
A: A: Manufacturer and we focus on the development and production of air compressors for more than 20 years.

Q2: Is OEM service available?
A: Of course. We have many years experience of OEM service.

Q3: Can I get a sample to check the quality?
A: We are glad to offer you samples for test. Leave us message of the item you want or your requirements. We will reply you within 24 hours in working time.

Q4: I am buying from another supplier, but need better service, would you match or beat the price I am paying?
A: We always feel we provide the best service and competitive prices. We would be more than happy to personalize a competitive quote for you, just email us.

Q5: Is customized service available?
A: Of course, OEM & ODM both are available. Please contact us for details.

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Vertical
Customization:
Available

|

air compressor

What Industries Commonly Use Screw Compressors?

Screw compressors are widely used in various industries due to their efficiency, reliability, and versatility. Here’s a detailed overview of the industries that commonly utilize screw compressors:

  • 1. Manufacturing: Screw compressors find extensive use in manufacturing industries such as automotive, aerospace, electronics, and appliances. They are employed for applications such as powering pneumatic tools, operating production lines, providing compressed air for painting, and controlling automated processes.
  • 2. Oil and Gas: The oil and gas industry extensively utilizes screw compressors for various purposes. They are employed in upstream operations for natural gas gathering, gas lift systems, and wellhead compression. In downstream operations, screw compressors are used in refining processes, gas transmission, and storage facilities.
  • 3. Chemical and Petrochemical: Screw compressors play a crucial role in chemical and petrochemical industries. They are used for compressing gases in chemical reactions, providing instrument air for control systems, powering pneumatic conveying systems, and handling various process gases in refining and production processes.
  • 4. Food and Beverage: Screw compressors are employed in the food and beverage industry for applications such as refrigeration, freezing, and air supply for packaging processes. They help maintain optimal temperature and humidity conditions, ensuring the quality and safety of food and beverage products.
  • 5. Pharmaceutical and Healthcare: Screw compressors are utilized in pharmaceutical manufacturing facilities, research laboratories, and healthcare institutions. They provide clean, oil-free compressed air for critical processes, such as pharmaceutical production, medical device manufacturing, and laboratory analysis. High-quality compressed air is essential to meet stringent quality and regulatory standards in these industries.
  • 6. Power Generation: Screw compressors find applications in power generation facilities, including gas turbine power plants, combined heat and power (CHP) systems, and cogeneration plants. They are used for inlet air compression, fuel gas boosting, and other compressed air requirements in power generation processes.
  • 7. Construction and Mining: Screw compressors are widely used in construction and mining industries for powering pneumatic tools, drilling equipment, and material handling systems. They provide the necessary compressed air for efficient and reliable operation in demanding construction and mining environments.
  • 8. Municipal and Wastewater Treatment: Screw compressors are utilized in municipal water treatment and wastewater treatment plants. They play a vital role in aeration processes, where compressed air is introduced into water or wastewater to promote biological treatment and ensure effective removal of contaminants.
  • 9. Printing and Packaging: Screw compressors are employed in printing and packaging industries for applications such as air drying, air cushioning, and powering pneumatic systems in printing presses and packaging machinery. They ensure consistent and reliable compressed air supply for efficient production processes.
  • 10. Automotive and Transportation: Screw compressors are used in automotive and transportation industries for applications such as air conditioning systems in vehicles, pneumatic braking systems, and compressed air supply for tire inflation and maintenance.

These are just a few examples, and screw compressors find applications in numerous other industries, including textiles, plastics, pulp and paper, steel and metal fabrication, electronics manufacturing, and more. The versatility and reliability of screw compressors make them a popular choice across a wide range of industrial sectors.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

How Do Screw Compressors Compare to Piston Compressors?

Screw compressors and piston compressors are two common types of compressors used for various applications. Here’s a detailed comparison between these two types:

1. Working Principle:

Screw Compressors: Screw compressors use intermeshing rotors (usually a male and female rotor) to compress air or gas. The rotors rotate in opposite directions, creating compression chambers that gradually reduce in volume, compressing the air or gas. Piston Compressors: Piston compressors, also known as reciprocating compressors, use a piston and cylinder arrangement to compress air or gas. The piston moves back and forth within the cylinder, creating compression by reducing the volume of the chamber.

2. Continuous vs. Intermittent Compression:

Screw Compressors: Screw compressors provide continuous compression, which means they can deliver a steady flow of compressed air or gas without pulsations. The compression process is smooth and continuous, resulting in less vibration and noise. Piston Compressors: Piston compressors provide intermittent compression due to the reciprocating motion of the piston. The compression process is characterized by pulsations, resulting in pressure fluctuations and higher vibration levels compared to screw compressors.

3. Efficiency:

Screw Compressors: Screw compressors are known for their relatively high efficiency. They can achieve higher isothermal and adiabatic efficiency compared to piston compressors. The smooth and continuous compression process in screw compressors minimizes energy losses and heat generation, resulting in improved efficiency. Piston Compressors: Piston compressors have lower overall efficiency compared to screw compressors. The reciprocating motion of the piston leads to energy losses due to friction, heat generation, and pressure pulsations. These factors can reduce the efficiency of piston compressors, especially at higher compression ratios.

4. Size and Portability:

Screw Compressors: Screw compressors are generally more compact and require less space compared to piston compressors of similar capacity. They have a simpler design with fewer moving parts, making them relatively lightweight and easier to install. Screw compressors are often mounted on a skid or integrated into compact packages, offering convenient portability. Piston Compressors: Piston compressors are typically larger and bulkier compared to screw compressors of similar capacity. They have more complex designs with multiple moving parts, including pistons, connecting rods, and valves. The larger size and weight of piston compressors make them less portable and require more installation space.

5. Maintenance and Service:

Screw Compressors: Screw compressors generally require less maintenance compared to piston compressors. They have fewer moving parts, reducing the chances of wear and tear. Screw compressors often have longer service intervals and lower maintenance costs. However, proper lubrication and regular inspections are still necessary to ensure optimal performance and efficiency. Piston Compressors: Piston compressors require regular maintenance due to the higher number of moving parts. Components such as pistons, rings, valves, and bearings may require more frequent inspections, lubrication, and replacements. Maintenance costs and service intervals for piston compressors are typically higher compared to screw compressors.

6. Noise and Vibration:

Screw Compressors: Screw compressors operate with lower noise and vibration levels compared to piston compressors. The continuous and smooth compression process in screw compressors results in reduced vibrations and quieter operation, making them suitable for noise-sensitive environments. Piston Compressors: Piston compressors can generate higher noise levels and vibrations due to the reciprocating motion of the piston and the pulsations during compression. Additional measures, such as sound insulation and vibration dampening, may be required to minimize noise and vibration in piston compressors.

Both screw compressors and piston compressors have their advantages and disadvantages depending on specific application requirements. Screw compressors are favored in applications that demand continuous and efficient compression with minimal pulsations and lower noise levels. Piston compressors are suitable for applications that require intermittent compression, lower initial investment, and simplicity. Factors such as desired flow rate, pressure range, operating conditions, and cost considerations play a crucial role in selecting the appropriate compressor type for a given application.

China OEM 30L Industrial Stationary Medical Oil Free Electric Direct Driven Screw Air Compressor   with Good qualityChina OEM 30L Industrial Stationary Medical Oil Free Electric Direct Driven Screw Air Compressor   with Good quality
editor by CX 2024-02-24

China Custom 75kw 380V Air Cooler Oil Free Vertical Electric Type Air CHINAMFG air compressor parts

Product Description

SPECIFICATION
Model

Pressure

MPa

Flow rate

m³/min

Power

Kw/HP

Noise

dB(A)

Cooling capacity

T/H

Oiling

L

Outlet Dia

G

Weight

Kg

BW-8WA

BW-8WW

0.8 1.05 7.5/10 57 2 10 3/4 360
1.0 0.8

BW-11WA

BW-11WW

0.8 1.72 11/15 60 2.5 26 1 420
1.0 1.42

BW-15WA

BW-15WW

0.8 2.25 15/20 60 3.5 26 1 520
1.0 1.92

BW-18WA

BW-18WW

0.8 3.0 18.5/25 63 4 30 1 670
1.1 2.2

BW-22WA

BW-22WW

0.8 3.65 22/30 63 5 30 1 690
1.0 3.0

BW-30WA

BW-30WW

0.8 5.0 30/40 66 7 40 11/2 840
1.0 3.9

BW-37WA

BW-37WW

0.8 6.3 37/50 66 9 40 11/2 960
1.0 5.33

BW-45WA

BW-45WW

0.8 7.8 45/60 68 10 90 11/2 1080
1.0 6.3

BW-55WA

BW-55WW

0.8 10.1 55/75 69 12 100 11/2 1180
1.0 7.9

1,Are you manufacturer?
BW: Yes, we are professional air compressor manufacturer over 15 years and our factory is located in ZheJiang .

2,How long is your air compressor warranty?
BW: Air end for 2 years,other for 1 year.

3,Do you provide After- sales service parts?
BW: Of course, We could provide easy- consumable spares.

4,How long could your air compressor be used?
BW: Generally, more than 20 years.

5,How about your price?
BW: Based on high quality, Our price is very competitive in this market all over the world.

6,How about your customer service?
BW: For email, we could reply our customers’ emails within 2 hours.

7,Do you support OEM?
BW: YES, and we also provide multiple models to select. How to get quicker quotation?When you send us inquiry, please confirm

Below information at the same time:
* What is the air displacement (m3/min,cfm/min)?
* What is the air pressure (mpa,bar,psi)?
* What is the voltage in your factory (v/p/Hz)?
* It is ok if you need air tank, air dryer and filters.

This information is helpful for us to check suitable equipment solution and quotation quickly

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Warranty: 1 Year
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Customization:
Available

|

air compressor

What Is the Lifespan of a Typical Screw Compressor?

The lifespan of a typical screw compressor can vary depending on several factors, including the quality of the equipment, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation:

The lifespan of a screw compressor is typically measured in operating hours, which refers to the cumulative hours the compressor has been in operation. While it’s challenging to provide an exact lifespan, as it can vary significantly, screw compressors are generally designed to have a long service life, often ranging from 20,000 to 100,000 operating hours.

Several factors can influence the lifespan of a screw compressor:

  • 1. Quality of Construction: The quality of construction and materials used in the compressor’s manufacturing plays a crucial role in its lifespan. Compressors built with high-quality components and robust construction tend to have a longer service life compared to those with lower-quality materials.
  • 2. Maintenance Practices: Regular and proper maintenance is essential to extend the lifespan of a screw compressor. Following the manufacturer’s recommended maintenance schedule, including tasks such as oil changes, filter replacements, and inspection of critical components, helps ensure optimal performance and reliability. Neglecting maintenance can lead to premature wear and potential breakdowns.
  • 3. Operating Conditions: The operating conditions in which the compressor operates can impact its lifespan. Factors such as temperature, humidity, and the presence of contaminants in the ambient air can affect the compressor’s performance and longevity. Compressors operated in clean, well-ventilated environments with controlled temperature and humidity conditions tend to have longer lifespans.
  • 4. Load and Usage Patterns: The load and usage patterns of the compressor also influence its lifespan. Compressors operated at or near their maximum capacity for prolonged periods may experience higher wear and tear compared to those operated within their recommended operating range. Compressors subjected to frequent start-stop cycles or continuous operation may have different lifespans based on the stress placed on their components.
  • 5. Maintenance and Repairs: The response to maintenance and repair needs can impact the compressor’s lifespan. Timely addressing of maintenance issues and prompt repairs when faults or malfunctions occur can prevent further damage and help prolong the compressor’s lifespan.
  • 6. Manufacturer and Design: The reputation and expertise of the manufacturer play a role in determining the compressor’s lifespan. Established manufacturers with a track record of producing reliable and durable equipment often design their compressors to have longer lifespans. It’s advisable to choose compressors from reputable manufacturers known for their quality and reliability.

It’s important to note that while a screw compressor may have a designed lifespan, it doesn’t necessarily mean it will fail immediately after reaching that threshold. With proper maintenance and care, compressors can often exceed their expected lifespan. On the other hand, neglecting maintenance or subjecting the compressor to harsh operating conditions can shorten its lifespan.

Regular monitoring of the compressor’s performance, including parameters such as discharge temperature, vibration levels, and energy consumption, can help identify any potential issues and take corrective actions to maintain the compressor’s reliability and extend its lifespan.

In summary, the lifespan of a typical screw compressor can range from 20,000 to 100,000 operating hours, depending on factors such as the quality of construction, maintenance practices, operating conditions, usage patterns, and manufacturer reputation. Adhering to proper maintenance practices, operating the compressor within its recommended parameters, and choosing a reputable manufacturer can help ensure a longer lifespan for the screw compressor.

air compressor

Can Screw Compressors Be Used in Food Processing?

Yes, screw compressors can be used in food processing. Here’s a detailed explanation:

Screw compressors are widely employed in various industrial applications, including the food processing industry. They provide a reliable and efficient source of compressed air, which is used for a range of purposes in food processing facilities. Here are some key points to consider:

1. Packaging: Screw compressors are commonly used in food packaging processes. Compressed air is utilized for tasks such as operating pneumatic actuators, controlling packaging machinery, and inflating packaging materials, such as bags and containers.

2. Cleaning and Drying: Compressed air is essential for cleaning and drying applications in the food industry. Screw compressors supply the necessary air pressure for tasks such as blowing off debris, dust, or moisture from food products, packaging surfaces, and production equipment.

3. Pneumatic Conveying: Screw compressors play a crucial role in pneumatic conveying systems used for transporting food products, such as grains, powders, or granules. Compressed air is utilized to create the necessary airflow to move the food materials through pipes or tubes to different processing stages or storage areas.

4. Cooling and Freezing: In food processing, screw compressors are often employed in refrigeration and cooling systems. They provide compressed air for various cooling processes, such as air chilling, blast freezing, or cryogenic freezing, which help maintain the freshness and quality of perishable food products.

5. Air Control and Mixing: Compressed air is utilized for precise air control and mixing applications in food processing. It can be used to control the flow rate, pressure, and temperature of air in mixing processes, such as dough mixing or batter preparation.

6. Cleaning-In-Place (CIP) Systems: CIP systems are widely used in the food industry to clean and sanitize equipment and pipelines. Compressed air is often an integral part of these systems, assisting in the removal of residues and ensuring proper cleaning and hygiene practices.

When using screw compressors in food processing, it is important to consider specific requirements and regulations related to food safety and quality. Here are some key considerations:

a) Food-Grade Lubricants: Ensure that the screw compressor is compatible with food-grade lubricants. Lubricants used in the compressor should be safe for incidental contact with food products and compliant with applicable food safety regulations.

b) Air Purity: Depending on the application, the compressed air may need to meet specific air quality standards to prevent contamination of food products. Standards such as ISO 8573, which define air purity classes for different contaminants, can be referenced to determine the required level of air purity.

c) Maintenance and Cleaning: Implement proper maintenance and cleaning procedures for the screw compressor to prevent any potential contamination risks. Regular inspection, cleaning, and adherence to good manufacturing practices (GMP) are essential to ensure food safety and compliance.

d) Regulatory Compliance: Comply with relevant food safety regulations and guidelines, such as those established by the Food and Drug Administration (FDA) or local regulatory authorities. These regulations may cover various aspects, including equipment design, materials, cleanliness, and hygiene practices.

In summary, screw compressors can be used in food processing for tasks such as packaging, cleaning, pneumatic conveying, cooling, and mixing. However, it is important to consider food safety regulations, use food-grade lubricants, maintain air quality, and follow proper maintenance and cleaning procedures to ensure compliance and protect the integrity of food products.

air compressor

What Are the Key Components of a Screw Compressor?

A screw compressor consists of several key components that work together to compress air or gas. Here’s a detailed explanation of these components:

1. Male and Female Rotors:

The male and female rotors are the primary components of a screw compressor. These helical rotors have specially designed profiles that interlock with each other. The male rotor typically has fewer lobes or threads compared to the female rotor. As the rotors rotate, the interlocking lobes create compression chambers that gradually reduce in volume, compressing the air or gas.

2. Compression Chamber:

The compression chamber is formed by the interlocking lobes of the rotors. It is the space where the air or gas is compressed as the rotors rotate. The volume of the compression chamber decreases as the lobes move towards the discharge end, resulting in the compression of the trapped air or gas.

3. Inlet and Outlet Ports:

The inlet port is the entry point through which the air or gas enters the screw compressor. It is typically located at the suction side of the compressor. The inlet port allows the air or gas to flow into the compression chamber during the suction process. The outlet port is the exit point through which the compressed air or gas is discharged from the compressor.

4. Drive System:

The drive system of a screw compressor consists of a motor and a drive mechanism. The motor provides the rotational power required to drive the rotors. Common types of drive mechanisms include direct drive, belt drive, and gear drive. The drive system ensures that the rotors rotate in opposite directions at the desired speed and synchronization.

5. Oil System (in oil-injected compressors):

In oil-injected screw compressors, an oil system is present to provide lubrication, cooling, and sealing between the rotors. The oil system typically includes an oil reservoir, an oil pump, oil filters, and oil coolers. The lubricating oil is injected into the compression chamber, where it forms a thin film on the rotors, reducing friction and minimizing wear.

6. Cooling System:

Screw compressors often incorporate a cooling system to maintain optimal operating temperatures. The cooling system may include air or water-cooled heat exchangers, which dissipate the heat generated during compression. Cooling ensures that the compressor operates within safe temperature limits, preventing overheating and prolonging the lifespan of the components.

7. Control System:

A control system is an essential component of a screw compressor, providing monitoring and regulation of various parameters. It may include sensors, controllers, and safety devices to measure and control variables such as pressure, temperature, and operating conditions. The control system ensures efficient and safe operation of the screw compressor.

8. Sound Attenuation and Vibration Isolation:

To reduce noise and vibration, screw compressors are often equipped with sound attenuation measures and vibration isolation systems. These components help in minimizing the noise and vibrations generated during operation, making the compressor suitable for noise-sensitive environments.

In summary, the key components of a screw compressor include the male and female rotors, compression chamber, inlet and outlet ports, drive system, oil system (in oil-injected compressors), cooling system, control system, and sound attenuation/vibration isolation components. These components work together to enable the efficient compression of air or gas in the screw compressor.

China Custom 75kw 380V Air Cooler Oil Free Vertical Electric Type Air CHINAMFG   air compressor partsChina Custom 75kw 380V Air Cooler Oil Free Vertical Electric Type Air CHINAMFG   air compressor parts
editor by CX 2024-02-23

China Professional Industrial Equipment Belt Drive Dcrew Air Compressor 220V Electric CHINAMFG air compressor CHINAMFG freight

Product Description

Industrial Equipment Belt Drive Dcrew Air Compressor 220V Electric Screw Compressor 

Product Parameters

Applicable Industries Manufacturing Plant, Food & Beverage Factory, Printing Shops, Construction works , Food & Beverage Shops, Advertising Company
Showroom Location None
Machinery Test Report Provided
Video outgoing-inspection Provided
Marketing Type Ordinary Product
Core Components Pressure vessel, Engine, Motor, Pump, Bearing
Gas Type     Air
Type PISTON
Lubrication Style Lubricated
Mute NO
Voltage 220V
Dimension(L*W*H) 163*60*105mm
Weight 290kg
Air capacity 800 L/min
Certification CE, ISO9001

 

MODEL NAME

Delivery rate at 0 bar

Max. pressure

Speed

Tank

Motor input

Voltage

Frequency

V1.05/12.5

 1050L/min

12.5 bar 178psi

750RPM

300L

7.5 KW

220 V

50 Hz

V0.48/12.5

  480 L/min

 12.5 bar
178 psi
   980RPM

120L

 5.5KW

220 V

50 Hz

V0.8/12.5

 800 L/min

12.5 bar
178 psi
  860RPM

190L

7.5 KW

220 V

50 Hz

 

Product Display

Company Profile

Founded in 2002, ZHangZhoug CHINAMFG Electromechanical Co., Ltd. focus on manufacturing air compressors for more than 15 years. Our company is located in Daxi Pump Industrial Area, HangZhou City, ZHangZhoug, China. having more than 15000 square meter working area.We specialize in all kinds of piston air compressors, especially having advantages in our new advanced heavy-duty oil-free air compressors.

FAQ

Q1: Are you a factory or a trading company?
A: A: Manufacturer and we focus on the development and production of air compressors for more than 20 years.

Q2: Is OEM service available?
A: Of course. We have many years experience of OEM service.

Q3: Can I get a sample to check the quality?
A: We are glad to offer you samples for test. Leave us message of the item you want or your requirements. We will reply you within 24 hours in working time.

Q4: I am buying from another supplier, but need better service, would you match or beat the price I am paying?
A: We always feel we provide the best service and competitive prices. We would be more than happy to personalize a competitive quote for you, just email us.

Q5: Is customized service available?
A: Of course, OEM & ODM both are available. Please contact us for details.

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Horizontal
Customization:
Available

|

air compressor

What Is the Lifespan of a Typical Screw Compressor?

The lifespan of a typical screw compressor can vary depending on several factors, including the quality of the equipment, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation:

The lifespan of a screw compressor is typically measured in operating hours, which refers to the cumulative hours the compressor has been in operation. While it’s challenging to provide an exact lifespan, as it can vary significantly, screw compressors are generally designed to have a long service life, often ranging from 20,000 to 100,000 operating hours.

Several factors can influence the lifespan of a screw compressor:

  • 1. Quality of Construction: The quality of construction and materials used in the compressor’s manufacturing plays a crucial role in its lifespan. Compressors built with high-quality components and robust construction tend to have a longer service life compared to those with lower-quality materials.
  • 2. Maintenance Practices: Regular and proper maintenance is essential to extend the lifespan of a screw compressor. Following the manufacturer’s recommended maintenance schedule, including tasks such as oil changes, filter replacements, and inspection of critical components, helps ensure optimal performance and reliability. Neglecting maintenance can lead to premature wear and potential breakdowns.
  • 3. Operating Conditions: The operating conditions in which the compressor operates can impact its lifespan. Factors such as temperature, humidity, and the presence of contaminants in the ambient air can affect the compressor’s performance and longevity. Compressors operated in clean, well-ventilated environments with controlled temperature and humidity conditions tend to have longer lifespans.
  • 4. Load and Usage Patterns: The load and usage patterns of the compressor also influence its lifespan. Compressors operated at or near their maximum capacity for prolonged periods may experience higher wear and tear compared to those operated within their recommended operating range. Compressors subjected to frequent start-stop cycles or continuous operation may have different lifespans based on the stress placed on their components.
  • 5. Maintenance and Repairs: The response to maintenance and repair needs can impact the compressor’s lifespan. Timely addressing of maintenance issues and prompt repairs when faults or malfunctions occur can prevent further damage and help prolong the compressor’s lifespan.
  • 6. Manufacturer and Design: The reputation and expertise of the manufacturer play a role in determining the compressor’s lifespan. Established manufacturers with a track record of producing reliable and durable equipment often design their compressors to have longer lifespans. It’s advisable to choose compressors from reputable manufacturers known for their quality and reliability.

It’s important to note that while a screw compressor may have a designed lifespan, it doesn’t necessarily mean it will fail immediately after reaching that threshold. With proper maintenance and care, compressors can often exceed their expected lifespan. On the other hand, neglecting maintenance or subjecting the compressor to harsh operating conditions can shorten its lifespan.

Regular monitoring of the compressor’s performance, including parameters such as discharge temperature, vibration levels, and energy consumption, can help identify any potential issues and take corrective actions to maintain the compressor’s reliability and extend its lifespan.

In summary, the lifespan of a typical screw compressor can range from 20,000 to 100,000 operating hours, depending on factors such as the quality of construction, maintenance practices, operating conditions, usage patterns, and manufacturer reputation. Adhering to proper maintenance practices, operating the compressor within its recommended parameters, and choosing a reputable manufacturer can help ensure a longer lifespan for the screw compressor.

air compressor

What Is the Impact of Ambient Temperature on Screw Compressor Performance?

Ambient temperature has a significant impact on the performance of screw compressors. Here’s a detailed explanation:

Screw compressors, like other types of compressors, rely on the surrounding environment to dissipate heat and maintain optimal operating conditions. The ambient temperature directly affects the compressor’s efficiency, capacity, power consumption, and overall performance.

Here are the key ways in which ambient temperature influences screw compressor performance:

1. Cooling Efficiency:

The cooling efficiency of a screw compressor is affected by the temperature difference between the compressed gas and the ambient air. As the ambient temperature increases, the temperature difference decreases, making it more challenging to transfer heat effectively. This can lead to higher discharge temperatures and reduced cooling efficiency, potentially impacting the compressor’s overall capacity and performance.

2. Capacity and Power Consumption:

Higher ambient temperatures can decrease the capacity of a screw compressor. Compressors are typically designed and rated based on specific operating conditions, including a defined ambient temperature range. When the ambient temperature exceeds the design limits, the compressor may experience reduced volumetric efficiency, resulting in a decrease in its overall capacity. Additionally, the compressor may require more power to maintain the desired pressure levels, leading to increased power consumption.

3. Heat Recovery:

In some applications, screw compressors are equipped with heat recovery systems to utilize the waste heat generated during compression. The effectiveness of heat recovery is influenced by the ambient temperature. Higher ambient temperatures can reduce the temperature differential available for heat exchange, limiting the potential for heat recovery and decreasing the overall system efficiency.

4. Lubrication and Cooling:

Screw compressors rely on lubrication systems to reduce friction and prevent wear between moving parts. The ambient temperature affects the performance of the lubricant. In high ambient temperatures, the lubricant may experience decreased viscosity, potentially leading to inadequate lubrication and increased wear on compressor components. Similarly, the cooling system of the compressor, including fans and heat exchangers, may be less effective in higher ambient temperatures, impacting the compressor’s ability to dissipate heat.

5. Operating Envelope:

Screw compressors have specified operating envelopes, which define the acceptable range of operating conditions, including ambient temperature. Operating the compressor outside its designed ambient temperature range can result in reduced reliability, increased maintenance requirements, and potential system failures. It is crucial to adhere to the manufacturer’s guidelines and ensure that the compressor operates within the recommended ambient temperature limits.

6. Control and Protection:

Modern screw compressors often feature advanced control and protection systems that monitor various parameters, including ambient temperature. These systems may adjust compressor operation, such as modulation of capacity or cooling strategies, to optimize performance and protect the compressor from operating outside safe limits. Understanding the impact of ambient temperature allows for appropriate adjustments and settings to maintain reliable and efficient compressor operation.

It’s important to note that different compressor models and manufacturers may have specific performance characteristics and operating limits. Therefore, consulting the manufacturer’s documentation and guidelines for the particular screw compressor in use is essential.

In summary, ambient temperature significantly affects the performance of screw compressors. Higher ambient temperatures can reduce cooling efficiency, decrease compressor capacity, increase power consumption, and impact lubrication and cooling systems. Adhering to recommended operating conditions and considering ambient temperature limitations are crucial for ensuring optimal performance, reliability, and longevity of screw compressors.

air compressor

What Are the Advantages of Using a Screw Compressor?

Using a screw compressor offers several advantages in various applications. Here’s a detailed explanation:

High Efficiency:

Screw compressors are known for their high efficiency in converting electrical power into compressed air or gas. The rotary positive displacement design of screw compressors allows them to deliver a large volume of compressed air or gas with minimal energy loss. This high efficiency results in cost savings and reduced energy consumption compared to other types of compressors.

Continuous Operation:

One of the key advantages of screw compressors is their ability to provide a continuous flow of compressed air or gas. The interlocking helical rotors ensure a smooth and continuous compression process without pulsations. This feature is particularly beneficial in applications that require a steady and reliable source of compressed air, such as in manufacturing plants and industrial processes.

Compact Design:

Screw compressors are known for their compact design, which allows for space-saving installation. They have a relatively small footprint compared to other types of compressors, making them suitable for applications where space is limited. The compact design also facilitates ease of installation and integration into existing systems.

Low Vibration and Noise Levels:

Screw compressors are designed to operate with low vibration levels, resulting in smooth and quiet operation. The interlocking rotors and balanced design help in minimizing vibrations, reducing the need for additional vibration isolation measures. The low noise levels make screw compressors suitable for applications where noise reduction is important, such as in office environments or noise-sensitive industrial settings.

Wide Range of Capacities:

Screw compressors are available in a wide range of capacities, allowing for flexibility in meeting different compressed air or gas requirements. Whether it’s a small-scale application or a large industrial process, there are screw compressors available to match the specific capacity needs. This versatility makes screw compressors suitable for a variety of industries and applications.

Oil-Injected and Oil-Free Options:

Screw compressors are offered in both oil-injected and oil-free variants, providing options to meet different application requirements. Oil-injected screw compressors use lubricating oil for cooling, sealing, and reducing friction between the rotors. They are commonly used in industrial applications where a small amount of oil in the compressed air is acceptable. Oil-free screw compressors, on the other hand, eliminate the need for oil and provide contaminant-free compressed air. They are preferred in industries such as food and beverage, pharmaceuticals, and electronics, where oil-free air is critical.

Overall, using a screw compressor offers advantages such as high efficiency, continuous operation, compact design, low vibration and noise levels, capacity flexibility, and options for oil-injected or oil-free operation. These benefits make screw compressors a popular choice in various industries for a wide range of applications.

China Professional Industrial Equipment Belt Drive Dcrew Air Compressor 220V Electric CHINAMFG   air compressor CHINAMFG freightChina Professional Industrial Equipment Belt Drive Dcrew Air Compressor 220V Electric CHINAMFG   air compressor CHINAMFG freight
editor by CX 2024-02-22

China Custom High Quality CHINAMFG Brand 45kw 55kw 8bar Electric Screw Air Compressor air compressor parts

Product Description

Refrigerated Compressed Air Dryer (Built-In Pre-Cooler)

Detailed Photos

Principle of working :
The amount of water vapor in the air compression by compressed air temperature determined: in case of compressed air pressure is basically the same, reduce the temperature of the air compressed compression to reduce the amount of water vapor in the air, and the excess water vapor will condense into liquid.
Freezing dryer is according to the corresponding relationship between the saturation water vapor pressure and temperature, use refrigeration device makes the compressed air is cooled to a certain dew point temperature, precipitation containing water, through the steam water separator and electric drainage device will discharge water, so that the compressed air can be dry.
 

Product Parameters

 

     
Model
 
Air Capacity
(Nm3/min)
Voltage
(V)
Fan Power
(W)
Air connector dia Net weight
(Kg)
Lenghth
(mm)
Wideth
(mm)
Height
(mm)
Air flow 
(Nm3/n)
SDLF-0.5HT 0.65 220 80 G1″ 54 400 560 730 820
SDLF-1HT 1.2 220 80 G1″ 57 400 560 730 820
SDLF-2HT 2.5 220 100 G1″ 66 520 640 890 1640
SDLF-3HT 3.6 220 135 G1″ 79 520 640 890 2670
SDLF-4.5HT 5.0 220 250 G1-1/2″ 86 540 700 1000 4650
SDLF-6HT 6.8 220 250 G1-1/2″ 90 540 700 1000 4650
SDLF-8HT 8.5 220 270 G2″ 99 610 900 1070 5700
SDLF-10HT 10.9 380/220 260 G2″ 113 610 900 1070 5700
SDLF-12HT 12.8 380/200 260 G2″ 113 610 900 1070 5700

Note: The above models use plate/plate-fin heat exchangers.

Company Profile

 

Certifications

 

Packaging & Shipping

 

FAQ

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Ok
Warranty: 15 Months
Flow: Cross Flow
Material Status: Bulk
Drying Medium: Air
Structure: All Kinds
Samples:
US$ 400/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

Can Screw Compressors Be Used for Medical Air Supply?

Yes, screw compressors can be used for medical air supply. Here’s a detailed explanation:

Screw compressors are commonly employed in various applications, including medical air supply systems. Medical air is a critical utility in healthcare facilities, used for various purposes such as respiratory therapy, anesthesia, and surgical tools. Here are some key points to consider:

1. Reliability and Efficiency:

Screw compressors are known for their reliability and efficiency. They can provide a continuous and reliable source of compressed air, ensuring a stable supply for medical applications. The rotary screw design allows for smooth and efficient compression, minimizing energy consumption and maximizing system performance.

2. Oil-Free Operation:

In medical applications, it is crucial to ensure the purity of the compressed air. Screw compressors can be designed and certified to provide oil-free air, eliminating the risk of oil contamination in the medical air supply. Oil-free screw compressors incorporate specialized sealing systems and filtration to prevent oil carryover, making them suitable for medical air applications.

3. Air Quality Standards:

Medical air must meet specific air quality standards to ensure patient safety and treatment effectiveness. Standards such as the European Pharmacopoeia (Ph. Eur.) or the United States Pharmacopeia (USP) define the required purity levels for medical air, including limits on particulate matter, moisture content, and microbial contamination. Screw compressors can be equipped with appropriate filtration and purification systems to meet these standards.

4. Integrated Drying and Filtration:

Some screw compressors designed for medical air applications incorporate integrated drying and filtration systems. These systems remove moisture and contaminants from the compressed air, ensuring it meets the required quality standards. Integrated drying systems can include refrigerated dryers, desiccant dryers, or membrane dryers, depending on the specific needs of the medical air supply system.

5. Redundancy and Backup Systems:

Medical air supply systems often require a high level of reliability and continuity. Screw compressors can be configured with redundancy and backup systems to ensure uninterrupted supply. Multiple compressors can be installed in parallel, with automatic switching mechanisms to maintain supply in case of a compressor failure or maintenance activities.

6. Monitoring and Alarms:

Modern screw compressors used in medical air supply systems often feature advanced monitoring capabilities. They can continuously monitor and record key parameters such as pressure, temperature, and system performance. Alarms and alerts can be configured to notify operators or maintenance personnel in case of abnormal conditions or potential issues with the compressor.

7. Compliance with Standards and Regulations:

When using screw compressors for medical air supply, it is essential to comply with relevant standards and regulations. These may include medical device regulations, electrical safety standards, and guidelines specific to medical gas systems. Compliance ensures that the medical air supply system meets the necessary safety and quality requirements.

In summary, screw compressors can be used for medical air supply, providing reliable and efficient compressed air for various medical applications. With their reliability, oil-free operation, adherence to air quality standards, integrated drying and filtration capabilities, and the ability to incorporate redundancy and monitoring features, screw compressors are well-suited for medical air supply systems in healthcare facilities.

air compressor

What Are the Maintenance Requirements for Screw Compressors?

Screw compressors require regular maintenance to ensure optimal performance, reliability, and longevity. Here’s a detailed overview of the maintenance requirements for screw compressors:

  • 1. Lubrication: Screw compressors rely on proper lubrication to reduce friction, minimize wear, and maintain efficient operation. Regular lubrication of the rotor bearings, seals, and other moving parts is essential. The type and frequency of lubrication may vary depending on the compressor’s design and manufacturer’s recommendations.
  • 2. Filter Replacement: Screw compressors have intake filters that prevent dust, debris, and contaminants from entering the compression chamber. These filters need to be inspected regularly and replaced or cleaned as necessary to ensure unrestricted airflow and prevent damage to the compressor components.
  • 3. Cooling System Maintenance: Screw compressors may have cooling systems, such as air or water coolers, to dissipate heat generated during compression. The cooling system should be inspected periodically, and any blockages or leaks should be addressed promptly to maintain optimal cooling efficiency.
  • 4. Inspection of Belts and Couplings: If the screw compressor is belt-driven or connected through couplings, regular inspection of belts, pulleys, and couplings is necessary. Worn or damaged belts should be replaced, and couplings should be checked for alignment and tightness to ensure smooth power transmission.
  • 5. Cleaning of Heat Exchangers: Heat exchangers in screw compressors, such as intercoolers and aftercoolers, can accumulate dirt, scale, and other deposits over time. Regular cleaning of these heat exchangers is important to maintain their heat transfer efficiency and prevent overheating of the compressed air or gas.
  • 6. Inspection of Seals and Gaskets: The seals and gaskets in a screw compressor play a critical role in maintaining proper compression and preventing air or gas leakage. Regular inspection of these components is necessary to detect any signs of wear, damage, or leakage. Faulty seals or gaskets should be replaced promptly to maintain the compressor’s efficiency.
  • 7. Regular Performance Testing: Periodic performance testing of screw compressors is recommended to assess their operating parameters, such as discharge pressure, flow rate, and power consumption. This helps identify any deviations from the expected performance and allows for adjustments or repairs as needed.

It’s important to note that the specific maintenance requirements for screw compressors may vary depending on the compressor’s design, manufacturer’s recommendations, operating conditions, and usage. Consulting the compressor’s manual and following the manufacturer’s guidelines is crucial for maintaining the compressor effectively and ensuring its reliable operation over time.

China Custom High Quality CHINAMFG Brand 45kw 55kw 8bar Electric Screw Air Compressor   air compressor partsChina Custom High Quality CHINAMFG Brand 45kw 55kw 8bar Electric Screw Air Compressor   air compressor parts
editor by CX 2024-02-19

China supplier Industrial Compressor Heavy Duty VSD Stationary AC Power Electric Air Cooled Directly Driven Rotary Screw Gas Air Compressors Pump with Germany Ghh Rand Air End air compressor parts

Product Description

Product Description

ZIQI CHINAMFG Screw Air Compressor Advantages:

A.80% components of CHINAMFG Compressor adopt global well known reliable brand to make sure the air compressor with high quality,durable,energy saving:
1.Core part:Germany GHH RAND screw air end ;
2.Motor:adopt Brazil WEG brand,the second biggest motor manufacturer in the world,IE4 energy saving standard 3 phase induction motor,IP55 protection;
3.Italian EURE oil air vessel ,the lead pressure vessel manufacturer in the world;
4.Italian Manuli oil tube ;
5.French Schneider electric system;
6.Sweden CHINAMFG bearings

Energy saving:
The air compressor equiped the frequency inverter,to make the air compressor with variable speed drive [VSD]. The principle of VSD is to adjust the motor rotation speed automatically according to the actual air consumption. The reduced system pressure decreases the total energy consumption of the whole system, which can  reduce energy costs by 35% or more .

Technical Parameter

Model Air pressure Max air displacement  Motor power transmission dimension Weight Noise Outlet
cooling type
mpa bar(e)  psi(g)  m3/min  cfm  hp  kw  belt drive 
&
air cooling
L(mm) W(mm) H(mm) Kgs dB(A) mm
GA-3.7A 0.7 7 102 0.55 19 5 3.7  680  660  780  220 60±2  20
0.8 8 116 0.45 16
1 10 145 0.35 12
GA-5.5A 0.7 7 102 0.8 28 7 5.5 680 660 780 230 61±2 20
0.8 8 116 0.7 25
1 10 145 0.6 21
1.3 13 189 0.5 18
GAS-7.5A VFC 0.7 7 102 1.3 46 10 7.5 950 650 915 270 62±2 20
0.8 8 116 1.2 42
1 10 145 1.1 39
1.3 13 189 0.9 32
GAS-11A VFC 0.7 7 102 1.8 64 15 11 950 650 915 280 63±2 20
0.8 8 116 1.7 60
1 10 145 1.5 53
1.3 13 189 1.2 42
GAS-15A VFC 0.7 7 102 2.7 95 20 15 1260 850 1220 540 66±2 25
0.8 8 116 2.5 88
1 10 145 2.3 81
1.3 13 189 2 71
GAS-18.5A VFC 0.7 7 102 3.2 113 25 18.5 1260 850 1220 550 67±2 25
0.8 8 116 3 106
1 10 145 2.8 99
1.3 13 189 2.4 85
GAS-22A VFC 0.7 7 102 3.8 134 30 22 1260 850 1220 560 67±2 25
0.8 8 116 3.6 127
1 10 145 3.2 113
1.3 13 189 2.8 99
GAS-30A VFC 0.7 7 102 5.7 201 40 30 1500 970 1375 780 67±2 40
0.8 8 116 5.5 194
1 10 145 5 177
1.3 13 189 4.5 159
GAS-37A VFC 0.7 7 102 6.8 240 50 37 1500 970 1375 800 68±2 40
0.8 8 116 6.31 222
1 10 145 5.7 201
1.3 13 189 5 177
GAS-45A VFC 0.7 7 102 7.9 279 60 45 1500 970 1375 820 69±2 40
0.8 8 116 7.4 261
1 10 145 6.9 244
1.3 13 189 6.1 215
GAS-55A VFC 0.7 7 102 10.9 385 75 55 direct drive &air cooling or water cooling 2150 1326 1766 1550 69±2 50
0.8 8 116 10.4 367
1 10 145 9.4 332
1.3 13 189 8.6 304
GAS-75A VFC 0.7 7 102 14.5 512 100 75 2150 1326 1766 1600 70±2 50
0.8 8 116 13.8 487
1 10 145 12.6 445
1.3 13 189 11.2 395
GAS-90A VFC 0.7 7 102 17 600 120 90 2545 1450 1900 2500 75±2 65
0.8 8 116 16.5 583
1 10 145 15.2 537
1.3 13 189 14 494

*For other requirements,please contact the salesman.

Company Information

Packaging & Shipping

FAQ

 

Are you manufacturer?
ZIQI: Yes,we are professional air compressor manufacturer over 10 years and our factory located in ZheJiang .
How long is your air compressor warranty?
ZIQI: For 1 year.
Do you provide After- sales service parts?
ZIQI: Of course, We could provide easy- consumable spares.
How long could your air compressor be used?
ZIQI: Generally, more than 10 years.
How about your price?
ZIQI: Based on high quality, Our price is very competitive in this market all over the world.
How about your customer service?
ZIQI: For email, we could reply our customers’ emails within 2 hours.
Do you support OEM?
ZIQI: YES, and we also provide multiple models to select.

How to get quicker quotation?

When you send us inquiry, please confirm below information at the same time:
* What is the air displacement (m3/min,cfm/min)?
* What is the air pressure (mpa,bar,psi)?
* What is the voltage in your factory (v/p/Hz)?
* It is ok if you need air tank, air dryer and filters.
This information is helpful for us to check suitable equipment solution and quotation quickly.

 

Hot Products

VSD Oil-Free Screw Air Compressor Combined Screw Air Compressor Two Stage Screw Air Compressor

 

Contact

Bob Cui | Overseas Sale Manager

ZIQI Compressor(ZheJiang )Co.,Ltd

Add:No.280,Wangwei West Rd.Fengjing Industrial Park, Xihu (West Lake) Dis.n Dist.,ZheJiang ,CN.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Customization:
Available

|

air compressor

Are There Portable Screw Compressors Available?

Yes, portable screw compressors are available in the market to cater to various applications that require mobility and flexibility. Here’s a detailed explanation:

Portable screw compressors are compact and designed for easy transportation, allowing them to be used in different locations as needed. They offer the advantage of providing compressed air or gas on-site without the need for a fixed installation.

These compressors are typically designed with features that make them suitable for portable applications. Some key characteristics of portable screw compressors include:

  • 1. Compact and Lightweight Design: Portable screw compressors are designed to be lightweight and compact, making them easy to transport and maneuver. They are often mounted on wheels or skids for enhanced mobility.
  • 2. Durability and Robustness: Portable compressors are built to withstand the rigors of transportation and on-site use. They are constructed with sturdy materials and reinforced components to ensure durability in various working environments.
  • 3. Engine-Powered: Many portable screw compressors are powered by internal combustion engines, such as gasoline or diesel. This eliminates the need for a fixed power source, allowing them to be used in remote locations or areas without access to electricity.
  • 4. Integrated Controls and Safety Features: Portable compressors are equipped with user-friendly controls and safety features for easy operation and protection. These may include start/stop controls, pressure regulation systems, temperature monitoring, and safety shutdown mechanisms.
  • 5. Noise and Vibration Reduction: Portable screw compressors often incorporate noise and vibration reduction technologies to minimize their operational noise levels and vibrations. This helps maintain a comfortable and safe working environment.
  • 6. Versatility in Application: Portable screw compressors are designed to accommodate a wide range of applications. They can be used for construction projects, road repairs, mining operations, oil and gas exploration, emergency air supply, and other portable compressed air or gas requirements.

The capacity and performance of portable screw compressors can vary, ranging from smaller units suitable for light-duty tasks to larger compressors capable of delivering higher volumes and pressures for heavy-duty applications.

When selecting a portable screw compressor, it’s important to consider factors such as the required air or gas flow rate, operating pressure, power source availability, environmental conditions, and specific application needs. Consulting with manufacturers or suppliers can help in choosing the most suitable portable screw compressor for a particular use case.

air compressor

Can Screw Compressors Be Used for Refrigeration?

Yes, screw compressors can be used for refrigeration applications. Here’s a detailed explanation:

Screw compressors are versatile and widely used in various industrial applications, including refrigeration. They are known for their efficiency, reliability, and ability to handle high-capacity refrigeration systems. Screw compressors work by compressing refrigerant gas, increasing its pressure and temperature, and then transferring the heat to the surrounding environment.

Here are some key points regarding the use of screw compressors in refrigeration:

1. Industrial Refrigeration Systems:

Screw compressors are commonly employed in large-scale industrial refrigeration systems, such as those used in cold storage facilities, food processing plants, beverage production, and HVAC systems for commercial buildings. These systems require high cooling capacities and continuous operation, making screw compressors an ideal choice.

2. Positive Displacement Compressors:

Screw compressors belong to the category of positive displacement compressors. They use two interlocking helical rotors (screws) to trap and compress the refrigerant gas. This design ensures a continuous flow of refrigerant and allows for efficient compression over a wide range of operating conditions.

3. Oil-Injected and Oil-Free Types:

Screw compressors can be either oil-injected or oil-free. Oil-injected screw compressors use oil for lubrication and cooling, which helps reduce friction and extend the compressor’s lifespan. In contrast, oil-free screw compressors use specialized coatings and materials to eliminate the need for oil, making them suitable for applications where oil contamination is a concern, such as in the pharmaceutical or food industries.

4. Multi-Stage Compression:

In refrigeration applications, screw compressors are often used in multi-stage configurations to achieve higher pressure ratios and improve overall system efficiency. Multi-stage compression involves compressing the refrigerant gas in multiple stages, typically with intermediate cooling between each stage, to reduce the work required for compression and enhance system performance.

5. Variable Speed Control:

Screw compressors can be equipped with variable speed drives (VSD) that allow for precise control of the compressor’s rotational speed. VSD technology enables the compressor to adjust its capacity according to the refrigeration load, resulting in energy savings and improved system performance.

6. System Integration:

Screw compressors are often integrated into complex refrigeration systems, working in tandem with other components such as condensers, evaporators, expansion valves, and control systems. This integration ensures efficient heat transfer, proper refrigerant flow, and effective temperature control.

It’s important to note that the selection of a screw compressor for refrigeration applications should consider factors such as cooling capacity requirements, operating conditions, refrigerant type, system configuration, and specific industry regulations.

In summary, screw compressors are well-suited for refrigeration applications, especially in industrial settings. Their efficiency, reliability, and capacity make them a popular choice for large-scale refrigeration systems. Whether in cold storage facilities, food processing plants, or HVAC systems, screw compressors play a crucial role in maintaining optimal temperatures and preserving perishable goods.

air compressor

Can Screw Compressors Handle High-Pressure Applications?

Yes, screw compressors are capable of handling high-pressure applications. Here’s a detailed explanation:

Screw compressors are known for their ability to deliver high-pressure compressed air or gas. The design of screw compressors allows them to achieve higher pressure ratios compared to other types of compressors, such as reciprocating piston compressors.

The compression process in screw compressors is continuous and smooth, which enables them to handle high-pressure requirements efficiently. The intermeshing rotors create compression chambers that gradually reduce in volume, resulting in the compression of air or gas. By adjusting the rotational speed of the rotors and optimizing the design parameters, screw compressors can generate the desired high discharge pressures.

However, it’s important to note that the maximum pressure capability of a screw compressor may vary depending on factors such as:

  • 1. Compressor Design: The design features of the screw compressor, including the rotor profile, sealing mechanism, and cooling system, can influence its maximum pressure capacity.
  • 2. Rotor Size and Speed: The size and rotational speed of the rotors impact the compression ratio and, consequently, the achievable discharge pressure. Larger rotors and higher rotational speeds generally allow for higher pressure ratios.
  • 3. Drive Power: The power of the drive motor connected to the screw compressor affects its ability to handle high-pressure applications. Adequate power is necessary to overcome the resistance and maintain the desired compression ratio.
  • 4. Structural Integrity: The structural integrity and material strength of the compressor housing, rotors, and other components determine the maximum pressure that the compressor can withstand without failure or leakage.

It’s important to select a screw compressor with the appropriate specifications and consult the manufacturer’s guidelines to ensure that it can handle the specific high-pressure requirements of the application.

Additionally, it’s worth noting that high-pressure applications may also require additional equipment, such as pressure vessels or downstream pressure regulators, to safely handle and control the compressed air or gas at the desired pressure levels.

China supplier Industrial Compressor Heavy Duty VSD Stationary AC Power Electric Air Cooled Directly Driven Rotary Screw Gas Air Compressors Pump with Germany Ghh Rand Air End   air compressor partsChina supplier Industrial Compressor Heavy Duty VSD Stationary AC Power Electric Air Cooled Directly Driven Rotary Screw Gas Air Compressors Pump with Germany Ghh Rand Air End   air compressor parts
editor by CX 2024-02-15