Tag Archives: screw driven

China Custom Movable Air Compressor Engine Direct Driven Mobile Portable Oil Lubricated Screw Air Compressor 75kw 90kw 110kw 132kw 0.8 Bar 1.0 Bar air compressor lowes

Product Description

Compressor Electric Motor Engine Direct Driven Mobile Portable Oil Lubricated Screw Air Compressor with 4 Big Wheels for Worksite 75KW 90KW 110KW 132KW 0.8 Bar 1.0 Bar 1.4 Bar 1.6 Bar

 

Product Structure

Internal Structure Frontside

Internal Structure Backside

Advantages of Big mobile screw air compressor

1. High reliability: the compressor has fewer parts and no wearing parts, so it runs reliably and has a long service life, and the overhaul time can be up to 40,000 to 80,000 hours.

2. Convenient operation and maintenance: high degree of automation, the operator does not have to go through a long time of professional training, can realize unattended operation.

3. Good power balance: it can run smoothly at high speed, characterized by strong gas transmission, fast gas supply, volumetric flow rate almost unaffected by exhaust pressure, and efficiency can be maintained at a wide range of speeds.

4. Strong adaptability: small size, light weight, small footprint, easy to move, very suitable for application in building construction, spraying, pile breaking, sand blasting, urban construction, road construction and other industries.

5. Complete variety series: The complete series of products, the exhaust volume has been from small to large, which meets the needs of different construction conditions.  There are diverse structures, suitable for different users.
 

Product Parameters

 

Model Power Pressure Free air delivery* of unit at working pressure Voltage Frequency Noise Level Air outlet discharge size Weight Dimensions
KW Mpa m³/min V Hz dB(A) Inch Kg L*W*H(mm)
SZDY75 75 0.8 13.0 380 50 76 G2″ 1700 2380*1620*1800
1.0 12.0
SZDY90 90 0.8 16.0 380 50 76 G2″ 1900 2380*1620*1800
1.0 15.0
1.4 13.0
SZDY110 110 0.8 20.0 380 50 80 G2″ 2520 2700*1496*1918
1.0 17.0
1.3 16.0
1.7 13.0
SZDY132 132 0.8 24.0 380 50 80 G2″ 2720 2700*1496*1918
1.0 22.0
1.3 20.0
1.7 18.0

 

Detailed Photos

 

Aluminum Intake Valve
The working principle is loaded with electricity, and unloaded with loss of electricity, with the function of unloading and replenishing air, and the function of eliminating the noise of the host. Stable and durable performance, smooth surface and wear-resistant.

Reliable Oil and Air Separator
Vertical tangential cyclone separation structure, complete separation of oil and air, easy replacement of cartridge, and reduced maintenance cost.

Cooling System
Large heat exchange area design effectively prevents high-temperature machines and reduces oil emulsification and coking caused by high-temperature.

Oil Viewing Mirror
Adopting PMMA material, good transparency, high temperature resistance, and small color change, you can visually observe the oil level change and the use of lubricating oil, timely replacement and adding, to avoid the replacement of untimely damage caused by the equipment.

High Quality Rubber Tires
The tire specification is 175/65R15 84T, vacuum tires, iron wheels, durable, tread pattern grip, applicable to a variety of complex site conditions.

Intelligent Drive Control
Newly designed intelligent drive controller can do under-voltage supplement for equipment start-up, start-up voltage of 300V-480V can be realized for equipment operation, and protection of the motor, to avoid burning the motor due to low-voltage start-up, eliminating the need for AC contactors, reducing the cost of late maintenance.

Safe and Zero Leakage Connection
Sanzhi has abandoned the traditional low-cost hydraulic hose design. Sanzhi uses High-rigid pipes and flexible joint connections, avoiding bursts typically caused by aging, rubber type 0-ring offers a flexible seal preventing leakage.

Smart Touch Controller
Superior built-in intelligence requires minimal manual operation. A high-precision color electronic screen, clear graphics display, and indication of maintenance information, fault alarms, and safety shutdown alarms.

Packaging&Shipping

Our Advantages
 

1. Price advantage

Direct to provide customers with ex-factory prices, so that customers are more competitive.

2. Direct deal
All products are supplied directly from the factory and we will offer more cost-effective products.

3. OEM & ODM services
The strong production and management capacity of the factory can provide OEM/ODM service for you.

4. Customised service
We accept non-standard orders, export orders, voltage/power/pressure, etc, which can be customized. If you have demands, please contact us.

5. Accept small order
You can place a small trial order first to test the quality of our products.

6. Fast delivery
High-quality products with timely delivery.

7. Complete authorisation
For distributors, we can provide the full authorization certificate to allow you to sell our SANZHI brand products.

Certifications Display

FAQ
Q1. Are you a trading company or manufacturer?
A: We are a professional manufacturer of screw air compressors, with more than 10 years of experience.

Q2. How do you control quality?
A: 1. The raw materials are strictly inspected.
  2. Installation procedures are strictly controlled.
  3. Each machine must pass at least 5 hours of continuous testing before leaving the factory.

Q3. What information must I provide to get the suitable machine?
1. How much air delivery capacity (Unit: CFM or m³/Min)
2. How much working pressure (Unit: PSI, Bar or Mpa)
3. What is the voltage and frequency of my country of residence (V/Hz)
4. Whether I need other accessories such as an air tank, filters, and/or air dryers.
Tell us the answer, we will offer a scheme for you!

Q4. What is the general unit conversion?
1Bar = 0.1Mpa = 14.5PSI
1m³/min = 35.32cfm
1KW = 1.34HP

Q5. What is the available voltage air compressor?
A: Sanzhi available voltage include 380v/50hz/3p, 400v/50hz/3p, 415v/50hz/3p, 220v/60hz/3p, 440v/60hz/3p, and can be customized according to your requirements.

Q6. How long is the delivery time?
A: For standard voltage,15 working days after the confirmed order. Non-standard, please contact our sales.

Q7. What’s the payment term?
A: 30% T/T in advance, 40% T/T before shipment, and 30% T/T against the B/L copy. USD, RMB can be accepted.

Q8. How about your warranty?
A: One year for the whole machine and 2 years for screw air compressor, except for consumable spare parts.

Q9. What about the maintenance?
A: First maintenance needs to be done after 500 hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q10. Can machines be run in high-temperature environment?
A: Yes, machines would run in high-temperature environment countries. Working temperature from -20° to 45°(-4ºF-113ºF).

Q11. Do you offer OEM service?
A: Yes, with a professional design team, both OEM & ODM orders are highly welcome.

Q12. How long could your air compressor be used?
A: Generally, more than 10 years.

Q13. Will you provide some spare parts for the machines?
A: Yes, of course.

Q14. How about your after-sales service?
A: Provide customers with installation and commissioning online instructions, and arrange for our engineers to help you with training and installation.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Technology Support
Warranty: 1 Year, 2 Years
Lubrication Style: Lubricated
Samples:
US$ 8000/Piece
1 Piece(Min.Order)

|

Order Sample

Sample Color: Orange
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

What Is the Lifespan of a Typical Screw Compressor?

The lifespan of a typical screw compressor can vary depending on several factors, including the quality of the equipment, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation:

The lifespan of a screw compressor is typically measured in operating hours, which refers to the cumulative hours the compressor has been in operation. While it’s challenging to provide an exact lifespan, as it can vary significantly, screw compressors are generally designed to have a long service life, often ranging from 20,000 to 100,000 operating hours.

Several factors can influence the lifespan of a screw compressor:

  • 1. Quality of Construction: The quality of construction and materials used in the compressor’s manufacturing plays a crucial role in its lifespan. Compressors built with high-quality components and robust construction tend to have a longer service life compared to those with lower-quality materials.
  • 2. Maintenance Practices: Regular and proper maintenance is essential to extend the lifespan of a screw compressor. Following the manufacturer’s recommended maintenance schedule, including tasks such as oil changes, filter replacements, and inspection of critical components, helps ensure optimal performance and reliability. Neglecting maintenance can lead to premature wear and potential breakdowns.
  • 3. Operating Conditions: The operating conditions in which the compressor operates can impact its lifespan. Factors such as temperature, humidity, and the presence of contaminants in the ambient air can affect the compressor’s performance and longevity. Compressors operated in clean, well-ventilated environments with controlled temperature and humidity conditions tend to have longer lifespans.
  • 4. Load and Usage Patterns: The load and usage patterns of the compressor also influence its lifespan. Compressors operated at or near their maximum capacity for prolonged periods may experience higher wear and tear compared to those operated within their recommended operating range. Compressors subjected to frequent start-stop cycles or continuous operation may have different lifespans based on the stress placed on their components.
  • 5. Maintenance and Repairs: The response to maintenance and repair needs can impact the compressor’s lifespan. Timely addressing of maintenance issues and prompt repairs when faults or malfunctions occur can prevent further damage and help prolong the compressor’s lifespan.
  • 6. Manufacturer and Design: The reputation and expertise of the manufacturer play a role in determining the compressor’s lifespan. Established manufacturers with a track record of producing reliable and durable equipment often design their compressors to have longer lifespans. It’s advisable to choose compressors from reputable manufacturers known for their quality and reliability.

It’s important to note that while a screw compressor may have a designed lifespan, it doesn’t necessarily mean it will fail immediately after reaching that threshold. With proper maintenance and care, compressors can often exceed their expected lifespan. On the other hand, neglecting maintenance or subjecting the compressor to harsh operating conditions can shorten its lifespan.

Regular monitoring of the compressor’s performance, including parameters such as discharge temperature, vibration levels, and energy consumption, can help identify any potential issues and take corrective actions to maintain the compressor’s reliability and extend its lifespan.

In summary, the lifespan of a typical screw compressor can range from 20,000 to 100,000 operating hours, depending on factors such as the quality of construction, maintenance practices, operating conditions, usage patterns, and manufacturer reputation. Adhering to proper maintenance practices, operating the compressor within its recommended parameters, and choosing a reputable manufacturer can help ensure a longer lifespan for the screw compressor.

air compressor

How Do You Maintain the Air Quality in a Screw Compressor System?

Maintaining air quality in a screw compressor system is crucial to ensure the performance, efficiency, and reliability of the compressed air. Here’s a detailed explanation:

1. Proper Intake Filtration:

Install high-quality intake filters to prevent contaminants, such as dust, dirt, and debris, from entering the screw compressor system. These filters should have an appropriate filtration rating to effectively capture particles of the desired size. Regularly inspect and clean or replace the intake filters to maintain their effectiveness.

2. Compressed Air Dryers:

Use compressed air dryers, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air. Moisture can lead to corrosion, damage to pneumatic equipment, and compromised air quality. The type of dryer selected depends on the specific application requirements and the desired level of moisture removal.

3. Oil Removal Filters:

In oil-injected screw compressors, oil is used for lubrication, which can contaminate the compressed air. Install oil removal filters downstream of the compressor to remove any oil carryover from the compressed air. These filters typically use coalescing technology to separate and trap oil particles, ensuring clean air quality.

4. Condensate Management:

Effectively manage condensate, which is formed when moisture in the compressed air condenses as it cools. Install condensate drains and separators to remove and properly dispose of condensate. Improper condensate management can lead to water contamination in the compressed air system.

5. Regular Maintenance:

Perform regular maintenance tasks as recommended by the manufacturer, including oil changes, filter replacements, and inspections. Proper maintenance helps ensure that the compressor system operates efficiently and minimizes the risk of contaminants entering the compressed air.

6. Air Receiver Tank Maintenance:

If the screw compressor system includes an air receiver tank, regularly inspect and clean the tank to remove any accumulated debris or contaminants. Additionally, ensure that the tank’s drain valve is functioning correctly to remove any water or condensate from the tank.

7. Leak Detection and Repair:

Regularly inspect the compressed air system for leaks. Leaks not only waste energy but also allow contaminants from the surrounding environment to enter the system. Use appropriate leak detection methods, such as ultrasonic detectors or soapy water solutions, to identify and promptly repair any leaks.

8. Monitor and Control Operating Conditions:

Monitor and maintain proper operating conditions within the screw compressor system. This includes monitoring discharge pressure, temperature, and other relevant parameters to ensure they are within acceptable ranges. Implement appropriate control strategies, such as regulating compressor capacity or adjusting dryer settings, to optimize air quality while meeting the specific application requirements.

9. Training and Awareness:

Provide training to operators and maintenance personnel on the importance of air quality in a screw compressor system. Ensure they understand proper maintenance procedures, the significance of filtration, and how to identify and address potential air quality issues.

10. Compliance with Regulations:

Be aware of and comply with relevant regulations and standards governing air quality in your specific industry or application. This may include adherence to guidelines such as ISO 8573, which specifies air purity classes for different contaminants in compressed air systems.

By following these practices, you can maintain the air quality in a screw compressor system, ensuring clean, reliable, and high-quality compressed air for various applications.

air compressor

How Do Screw Compressors Compare to Piston Compressors?

Screw compressors and piston compressors are two common types of compressors used for various applications. Here’s a detailed comparison between these two types:

1. Working Principle:

Screw Compressors: Screw compressors use intermeshing rotors (usually a male and female rotor) to compress air or gas. The rotors rotate in opposite directions, creating compression chambers that gradually reduce in volume, compressing the air or gas. Piston Compressors: Piston compressors, also known as reciprocating compressors, use a piston and cylinder arrangement to compress air or gas. The piston moves back and forth within the cylinder, creating compression by reducing the volume of the chamber.

2. Continuous vs. Intermittent Compression:

Screw Compressors: Screw compressors provide continuous compression, which means they can deliver a steady flow of compressed air or gas without pulsations. The compression process is smooth and continuous, resulting in less vibration and noise. Piston Compressors: Piston compressors provide intermittent compression due to the reciprocating motion of the piston. The compression process is characterized by pulsations, resulting in pressure fluctuations and higher vibration levels compared to screw compressors.

3. Efficiency:

Screw Compressors: Screw compressors are known for their relatively high efficiency. They can achieve higher isothermal and adiabatic efficiency compared to piston compressors. The smooth and continuous compression process in screw compressors minimizes energy losses and heat generation, resulting in improved efficiency. Piston Compressors: Piston compressors have lower overall efficiency compared to screw compressors. The reciprocating motion of the piston leads to energy losses due to friction, heat generation, and pressure pulsations. These factors can reduce the efficiency of piston compressors, especially at higher compression ratios.

4. Size and Portability:

Screw Compressors: Screw compressors are generally more compact and require less space compared to piston compressors of similar capacity. They have a simpler design with fewer moving parts, making them relatively lightweight and easier to install. Screw compressors are often mounted on a skid or integrated into compact packages, offering convenient portability. Piston Compressors: Piston compressors are typically larger and bulkier compared to screw compressors of similar capacity. They have more complex designs with multiple moving parts, including pistons, connecting rods, and valves. The larger size and weight of piston compressors make them less portable and require more installation space.

5. Maintenance and Service:

Screw Compressors: Screw compressors generally require less maintenance compared to piston compressors. They have fewer moving parts, reducing the chances of wear and tear. Screw compressors often have longer service intervals and lower maintenance costs. However, proper lubrication and regular inspections are still necessary to ensure optimal performance and efficiency. Piston Compressors: Piston compressors require regular maintenance due to the higher number of moving parts. Components such as pistons, rings, valves, and bearings may require more frequent inspections, lubrication, and replacements. Maintenance costs and service intervals for piston compressors are typically higher compared to screw compressors.

6. Noise and Vibration:

Screw Compressors: Screw compressors operate with lower noise and vibration levels compared to piston compressors. The continuous and smooth compression process in screw compressors results in reduced vibrations and quieter operation, making them suitable for noise-sensitive environments. Piston Compressors: Piston compressors can generate higher noise levels and vibrations due to the reciprocating motion of the piston and the pulsations during compression. Additional measures, such as sound insulation and vibration dampening, may be required to minimize noise and vibration in piston compressors.

Both screw compressors and piston compressors have their advantages and disadvantages depending on specific application requirements. Screw compressors are favored in applications that demand continuous and efficient compression with minimal pulsations and lower noise levels. Piston compressors are suitable for applications that require intermittent compression, lower initial investment, and simplicity. Factors such as desired flow rate, pressure range, operating conditions, and cost considerations play a crucial role in selecting the appropriate compressor type for a given application.

China Custom Movable Air Compressor Engine Direct Driven Mobile Portable Oil Lubricated Screw Air Compressor 75kw 90kw 110kw 132kw 0.8 Bar 1.0 Bar   air compressor lowesChina Custom Movable Air Compressor Engine Direct Driven Mobile Portable Oil Lubricated Screw Air Compressor 75kw 90kw 110kw 132kw 0.8 Bar 1.0 Bar   air compressor lowes
editor by CX 2024-04-26

China Professional Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 M3/Min 5bar Two-Stage Rotary Screw Type Air Compressor air compressor CHINAMFG freight

Product Description

Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 m3/min 5bar Two-Stage Rotary Screw Type Air Compressor
 

Product Parameters

Technical Parameters Of fixed speed screw air compressor:

Model Power
(kw)
Air folw/pressure
(m3/Bar)
Outlet size Noise Unit weight
(KG)
Unit size
(mm)
WZS-22PMD-2S 22 6.25m³/5Bar RP1 1/2 66±3 1350 1800x1270x1550
WZS-30PMD-2S 30 7.2m³/5Bar RP1 1/2 66±3 1550 1800x1270x1550
WZS-37PMD-2S 37 10m³/5Bar RP1 1/2 68±3 1900 1800x1270x1550
WZS-45PMD-2S 45 12m³/5Bar RP2 68±3 2100 1800x1270x1550
WZS-55PMD-2S 55 13.8m³/5Bar RP2 70±3 2200 2100x1360x1660
WZS-75PMD-2S 75 18.5m³/5Bar DN65 70±3 2800 2800x1750x1900
WZS-90PMD-2S 90 23m³/5Bar DN65 72±3 2800 2800x1750x1900
WZS-110PMD-2S 110 28m³/5Bar DN80 72±3 3200 3200x1750x2250
WZS-132PMD-2S 132 32.5m³/5Bar D270N80 72±3 3500 3200x1750x2250
WZS-160PMD-2S 160 41m³/5Bar DN125 74±3 4100 3200x1750x2350
WZS-185PMD-2S 185 45m³/5Bar DN125 74±3 4500 3800x2150x2250
WZS-200PMD-2S 200 50m³/5Bar DN150 76±3 5100 3800x2150x2250
WZS-220PMD-2S 220 54m³/5Bar DN150 76±3 6200 3800x2250x2250
WZS-250PMD-2S 250 61m³/5Bar DN150 78±3 6600 4200x2250x2400

 

 

Company Profile

 

 

Certifications

 


 

Exhibition

 


Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)

2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).
 
High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won’t lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault. 
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.

SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.

 

FAQ

 

Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.

Q:  Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity

Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.

Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspect completely goods before shipping.

Q:  If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.

Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Video Technical Support
Warranty: Unit 1 Year, Air End 2 Years
Lubrication Style: Oil-less
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

Can Screw Compressors Be Used for Medical Air Supply?

Yes, screw compressors can be used for medical air supply. Here’s a detailed explanation:

Screw compressors are commonly employed in various applications, including medical air supply systems. Medical air is a critical utility in healthcare facilities, used for various purposes such as respiratory therapy, anesthesia, and surgical tools. Here are some key points to consider:

1. Reliability and Efficiency:

Screw compressors are known for their reliability and efficiency. They can provide a continuous and reliable source of compressed air, ensuring a stable supply for medical applications. The rotary screw design allows for smooth and efficient compression, minimizing energy consumption and maximizing system performance.

2. Oil-Free Operation:

In medical applications, it is crucial to ensure the purity of the compressed air. Screw compressors can be designed and certified to provide oil-free air, eliminating the risk of oil contamination in the medical air supply. Oil-free screw compressors incorporate specialized sealing systems and filtration to prevent oil carryover, making them suitable for medical air applications.

3. Air Quality Standards:

Medical air must meet specific air quality standards to ensure patient safety and treatment effectiveness. Standards such as the European Pharmacopoeia (Ph. Eur.) or the United States Pharmacopeia (USP) define the required purity levels for medical air, including limits on particulate matter, moisture content, and microbial contamination. Screw compressors can be equipped with appropriate filtration and purification systems to meet these standards.

4. Integrated Drying and Filtration:

Some screw compressors designed for medical air applications incorporate integrated drying and filtration systems. These systems remove moisture and contaminants from the compressed air, ensuring it meets the required quality standards. Integrated drying systems can include refrigerated dryers, desiccant dryers, or membrane dryers, depending on the specific needs of the medical air supply system.

5. Redundancy and Backup Systems:

Medical air supply systems often require a high level of reliability and continuity. Screw compressors can be configured with redundancy and backup systems to ensure uninterrupted supply. Multiple compressors can be installed in parallel, with automatic switching mechanisms to maintain supply in case of a compressor failure or maintenance activities.

6. Monitoring and Alarms:

Modern screw compressors used in medical air supply systems often feature advanced monitoring capabilities. They can continuously monitor and record key parameters such as pressure, temperature, and system performance. Alarms and alerts can be configured to notify operators or maintenance personnel in case of abnormal conditions or potential issues with the compressor.

7. Compliance with Standards and Regulations:

When using screw compressors for medical air supply, it is essential to comply with relevant standards and regulations. These may include medical device regulations, electrical safety standards, and guidelines specific to medical gas systems. Compliance ensures that the medical air supply system meets the necessary safety and quality requirements.

In summary, screw compressors can be used for medical air supply, providing reliable and efficient compressed air for various medical applications. With their reliability, oil-free operation, adherence to air quality standards, integrated drying and filtration capabilities, and the ability to incorporate redundancy and monitoring features, screw compressors are well-suited for medical air supply systems in healthcare facilities.

air compressor

Can Screw Compressors Be Used in Industrial Applications?

Yes, screw compressors are widely used in industrial applications and are well-suited for various industrial processes. Here’s a detailed explanation:

1. Manufacturing and Assembly:

Screw compressors find extensive use in manufacturing and assembly processes. They provide a reliable source of compressed air for powering pneumatic tools, such as drills, impact wrenches, and spray guns. Compressed air is also used for operating pneumatic cylinders and valves, facilitating automation and control in industrial production lines.

2. Industrial Automation:

In industrial automation systems, screw compressors play a crucial role in providing compressed air for actuating control valves, operating robotic arms, and powering pneumatic actuators. The continuous and reliable supply of compressed air from screw compressors ensures the smooth operation of automated machinery and equipment.

3. HVAC Systems:

Screw compressors are commonly used in large-scale heating, ventilation, and air conditioning (HVAC) systems. They are employed in chillers, which cool water or air for air conditioning and refrigeration purposes. Screw compressors in HVAC systems offer high energy efficiency, making them cost-effective and environmentally friendly options for large commercial and industrial buildings.

4. Food and Beverage Industry:

The food and beverage industry relies on screw compressors for various applications. They are used for providing compressed air in food processing and packaging operations, such as pneumatic conveying, filling, labeling, and sealing. Screw compressors used in this industry are often of the oil-free type to ensure air purity and prevent contamination of food products.

5. Pharmaceuticals and Healthcare:

In the pharmaceutical and healthcare sectors, screw compressors are vital for critical applications. They provide clean and oil-free compressed air required for pharmaceutical manufacturing processes, including tablet coating, fermentation, lyophilization, and cleanroom operations. Screw compressors with strict air quality standards, such as oil-free and contaminant-free options, are commonly used in these industries.

6. Energy and Power Generation:

Screw compressors play a significant role in energy and power generation facilities. They are used for processes such as gas compression, pneumatic conveying of coal and biomass, and control air supply in power plants. Screw compressors in these applications are designed to handle high pressures and large volumes of gas.

7. Mining and Construction:

In mining and construction industries, screw compressors are employed for various tasks. They power pneumatic tools and equipment used in drilling, rock blasting, material handling, and construction activities. Screw compressors are valued for their reliability, continuous operation, and ability to withstand harsh operating conditions.

8. Oil and Gas Industry:

The oil and gas industry extensively uses screw compressors for gas compression and processing. Screw compressors are employed in natural gas pipelines, gas processing plants, and refineries. They handle the compression of gases, such as natural gas, hydrogen, and process gases, ensuring efficient transportation and refining operations.

These are just a few examples of the industrial applications where screw compressors are commonly used. Their high efficiency, continuous operation, compact design, and capacity flexibility make them well-suited for a wide range of industrial processes and systems.

China Professional Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 M3/Min 5bar Two-Stage Rotary Screw Type Air Compressor   air compressor CHINAMFG freightChina Professional Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 M3/Min 5bar Two-Stage Rotary Screw Type Air Compressor   air compressor CHINAMFG freight
editor by CX 2024-04-10

China factory Portable Diesel Gasoline Electric Driven Combined Rotary Screw Air Compressors for Mining HP 20 250 Cfm Kw 7/8/10/13 Bar Construction Equipment with CE and ISO manufacturer

Product Description

Screw type air compressor structure of a unique design, a compact, stylish appearance, high efficiency, small energy consumption, low noise characteristics and long life, is a smart environment-friendly products. Widely applied in metallurgy, machinery, chemicals, and mining, and electric power industries of the ideal gas source equipment.     
 
Advantage:

1.The third generation of advanced rotor and concise intake control system
2.Efficient centrifugal separator oil and gas, gas oil content is small,tube and core of long life . 
3. Efficient, low noise suction fan of the full use of export dynamic pressure 
    increased effect of heat transfer (air-cooled) 
4. Automatic water-cooling system for large air compressor to provide more 
   efficient 
5.Fault diagnosis system, the control panel is easy to operate 
6 Removable door, equipment maintenance, service convenient 
7.Micro-electronic processing so that temperature, pressure and other parameters are closely monitored .

PRODUCT HIGHLIGHTS
1.The brand power,reliable quality, stable performance.The harsh thermal equilibrium serviceability can guarantee that the machine work effectively under high temperature environment  (≤40ºC).

2.Unique patent design, light load startup system, the air control design is adapt to the  drilling work with high stability.

3.Efficient cooling system, divided into 3 parts: water- cooled ,mid- cold, oil cold, which ensure the reliable operation of diesel engine, and it’s suitable for high temperature working environment.

4.Independent research and development of the opposite door design, rational layout, which is easy to do regular maintenace ,with advantages of the fixed and portable compressor.

5.A single point lifting, forklift hole device, equipped with drag ring.It is suitable for repair car transport, easy to transfer and installation of the unit.

6.Waterproof and dustproof design, which is suitable for outdoor hard working environment.

7.According to customer requirements, the heating boiler and remote components is available for cold starting.
 

Model Pressure
(bar)
Displacement
(m³/min)
Diesel Engine
(kw)
Air End
Compression
Type Dimension
(mm)
Weight
(kg)
DPS-5/8 8 5 41 single stage 2 wheel 1660*1100*1600 700
DPS-6/8 8 6 41 single stage 2 wheel 2300*1460*1550 1000
DPS-7/8 8 7 78 single stage 2 wheel 2300*1500*1800 1350
DPS-9/8 8 9 78 single stage 2 wheel 2300*1500*1800 1450
DPS-13/8 8 13 110 single stage 4 wheel 2600*1486*2255 1800
DPS-12/10 10 12 110 single stage 4 wheel 3000*1776*2420 2500
DPS-10/14.5 14.5 10 110 two stage 4 wheel 3000*1776*2420 2500
DPS-12/15 15 12 110 two stage 4 wheel 3000*1776*2420 2700
DPS-10/18 18 10 140 two stage 4 wheel 3000*1776*2420 2700
DPS-15/15 15 15 132 single stage 4 wheel 3000*1776*2420 2500
DPS-15/13 13 15 132 single stage 4 wheel 3000*1776*2420 2500
DPS-16/16(17/13) 16/13 16/17 154 single stage 4 wheel 3000*1776*2420 2500
DPS-16/18 18 16 154 two stage 4 wheel 3000*1776*2420 2700
DPS-20/8 8 20 154 two stage 4 wheel 3000*1776*2420 2700
DPS-18/17 17 18 191 two stage 4 wheel 3200*2000*2600 3500
DPS-18/18(24/13) 18/13 18/24 191 two stage 4 wheel 3200*2000*2600 3700
DPS-20/20 20 20 191 two stage 4 wheel 3200*2000*2600 3700
DPS-22/20 20 22 228 two stage 4 wheel 3200*2000*2600 4000
DPS-31/25 25 31 295 two stage track 3200*1956*2600 4500

 ZheJiang CHINAMFG Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
    1.1 Oil-free screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3.Portable air compressor & Mining Equipment
    3.1 Diesel or Electric portable screw air compressor
    3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
    4.1 CHINAMFG or Adsorption compressed air drier
    4.2 Compressed air filter or tank
4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace, if needed.

Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q: How can we start order with your factory?
A: First, leave us an inquiry and advise which item you’re interested, and then we will contact you in 24 hours. You’re so kind if provide all detailed information, will better for us to know exactly what you need.

Q: What are your MOQ?
A: Different products have different MOQ, most is 1 set.

Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Do you a trade company or real factory?
A: We are 100% factory; we located in ZheJiang city, China.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 1 Years
Cooling System: Air Cooling
Power Source: Diesel Engine
Structure Type: Closed Type
Installation Type: Movable Type
Samples:
US$ 3000/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What Is the Lifespan of a Typical Screw Compressor?

The lifespan of a typical screw compressor can vary depending on several factors, including the quality of the equipment, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation:

The lifespan of a screw compressor is typically measured in operating hours, which refers to the cumulative hours the compressor has been in operation. While it’s challenging to provide an exact lifespan, as it can vary significantly, screw compressors are generally designed to have a long service life, often ranging from 20,000 to 100,000 operating hours.

Several factors can influence the lifespan of a screw compressor:

  • 1. Quality of Construction: The quality of construction and materials used in the compressor’s manufacturing plays a crucial role in its lifespan. Compressors built with high-quality components and robust construction tend to have a longer service life compared to those with lower-quality materials.
  • 2. Maintenance Practices: Regular and proper maintenance is essential to extend the lifespan of a screw compressor. Following the manufacturer’s recommended maintenance schedule, including tasks such as oil changes, filter replacements, and inspection of critical components, helps ensure optimal performance and reliability. Neglecting maintenance can lead to premature wear and potential breakdowns.
  • 3. Operating Conditions: The operating conditions in which the compressor operates can impact its lifespan. Factors such as temperature, humidity, and the presence of contaminants in the ambient air can affect the compressor’s performance and longevity. Compressors operated in clean, well-ventilated environments with controlled temperature and humidity conditions tend to have longer lifespans.
  • 4. Load and Usage Patterns: The load and usage patterns of the compressor also influence its lifespan. Compressors operated at or near their maximum capacity for prolonged periods may experience higher wear and tear compared to those operated within their recommended operating range. Compressors subjected to frequent start-stop cycles or continuous operation may have different lifespans based on the stress placed on their components.
  • 5. Maintenance and Repairs: The response to maintenance and repair needs can impact the compressor’s lifespan. Timely addressing of maintenance issues and prompt repairs when faults or malfunctions occur can prevent further damage and help prolong the compressor’s lifespan.
  • 6. Manufacturer and Design: The reputation and expertise of the manufacturer play a role in determining the compressor’s lifespan. Established manufacturers with a track record of producing reliable and durable equipment often design their compressors to have longer lifespans. It’s advisable to choose compressors from reputable manufacturers known for their quality and reliability.

It’s important to note that while a screw compressor may have a designed lifespan, it doesn’t necessarily mean it will fail immediately after reaching that threshold. With proper maintenance and care, compressors can often exceed their expected lifespan. On the other hand, neglecting maintenance or subjecting the compressor to harsh operating conditions can shorten its lifespan.

Regular monitoring of the compressor’s performance, including parameters such as discharge temperature, vibration levels, and energy consumption, can help identify any potential issues and take corrective actions to maintain the compressor’s reliability and extend its lifespan.

In summary, the lifespan of a typical screw compressor can range from 20,000 to 100,000 operating hours, depending on factors such as the quality of construction, maintenance practices, operating conditions, usage patterns, and manufacturer reputation. Adhering to proper maintenance practices, operating the compressor within its recommended parameters, and choosing a reputable manufacturer can help ensure a longer lifespan for the screw compressor.

air compressor

Can Screw Compressors Be Used for Refrigeration?

Yes, screw compressors can be used for refrigeration applications. Here’s a detailed explanation:

Screw compressors are versatile and widely used in various industrial applications, including refrigeration. They are known for their efficiency, reliability, and ability to handle high-capacity refrigeration systems. Screw compressors work by compressing refrigerant gas, increasing its pressure and temperature, and then transferring the heat to the surrounding environment.

Here are some key points regarding the use of screw compressors in refrigeration:

1. Industrial Refrigeration Systems:

Screw compressors are commonly employed in large-scale industrial refrigeration systems, such as those used in cold storage facilities, food processing plants, beverage production, and HVAC systems for commercial buildings. These systems require high cooling capacities and continuous operation, making screw compressors an ideal choice.

2. Positive Displacement Compressors:

Screw compressors belong to the category of positive displacement compressors. They use two interlocking helical rotors (screws) to trap and compress the refrigerant gas. This design ensures a continuous flow of refrigerant and allows for efficient compression over a wide range of operating conditions.

3. Oil-Injected and Oil-Free Types:

Screw compressors can be either oil-injected or oil-free. Oil-injected screw compressors use oil for lubrication and cooling, which helps reduce friction and extend the compressor’s lifespan. In contrast, oil-free screw compressors use specialized coatings and materials to eliminate the need for oil, making them suitable for applications where oil contamination is a concern, such as in the pharmaceutical or food industries.

4. Multi-Stage Compression:

In refrigeration applications, screw compressors are often used in multi-stage configurations to achieve higher pressure ratios and improve overall system efficiency. Multi-stage compression involves compressing the refrigerant gas in multiple stages, typically with intermediate cooling between each stage, to reduce the work required for compression and enhance system performance.

5. Variable Speed Control:

Screw compressors can be equipped with variable speed drives (VSD) that allow for precise control of the compressor’s rotational speed. VSD technology enables the compressor to adjust its capacity according to the refrigeration load, resulting in energy savings and improved system performance.

6. System Integration:

Screw compressors are often integrated into complex refrigeration systems, working in tandem with other components such as condensers, evaporators, expansion valves, and control systems. This integration ensures efficient heat transfer, proper refrigerant flow, and effective temperature control.

It’s important to note that the selection of a screw compressor for refrigeration applications should consider factors such as cooling capacity requirements, operating conditions, refrigerant type, system configuration, and specific industry regulations.

In summary, screw compressors are well-suited for refrigeration applications, especially in industrial settings. Their efficiency, reliability, and capacity make them a popular choice for large-scale refrigeration systems. Whether in cold storage facilities, food processing plants, or HVAC systems, screw compressors play a crucial role in maintaining optimal temperatures and preserving perishable goods.

air compressor

Are There Different Types of Screw Compressors?

Yes, there are different types of screw compressors available, catering to various application requirements. Here’s an overview of the main types:

1. Oil-Injected Screw Compressors:

Oil-injected screw compressors, also known as lubricated screw compressors, are the most common type. These compressors require the injection of a small amount of lubricating oil into the compression chamber. The oil serves multiple purposes, including lubrication, cooling, sealing, and reducing friction between the rotors. Oil-injected screw compressors are widely used in industrial applications where a small amount of oil in the compressed air is acceptable.

2. Oil-Free Screw Compressors:

Oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors incorporate specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and eliminate the need for oil. Oil-free screw compressors are preferred in applications that require oil-free and contaminant-free compressed air. Industries like food and beverage, pharmaceuticals, electronics, and others often rely on oil-free screw compressors to ensure the purity of the compressed air.

3. Variable Speed Drive (VSD) Screw Compressors:

VSD screw compressors, also known as variable frequency drive (VFD) screw compressors, are equipped with a variable speed drive system. This system allows the compressor to adjust the rotational speed of the motor and, consequently, the speed of the screw rotors. By varying the speed, VSD screw compressors can closely match the compressed air or gas demand, resulting in energy savings and improved efficiency. VSD screw compressors are particularly beneficial in applications with varying air demand, as they can adapt their output accordingly.

4. Two-Stage Screw Compressors:

Two-stage screw compressors consist of two sets of rotors arranged in series. The first stage compresses the air or gas to an intermediate pressure, and the second stage further compresses it to the desired final pressure. Two-stage screw compressors are commonly used in applications that require higher discharge pressures. By dividing the compression into two stages, these compressors can achieve higher efficiency and improved performance in high-pressure applications.

5. Water-Injected Screw Compressors:

Water-injected screw compressors, also known as liquid-injected screw compressors, utilize water or a water-glycol mixture as a sealing and cooling medium. The water injection helps in sealing the compression chamber and reduces the discharge temperature, enhancing the compressor’s efficiency. Water-injected screw compressors are often used in applications where oil contamination is a concern, such as in the pharmaceutical and food processing industries.

Each type of screw compressor has its own advantages and is suitable for specific applications. The choice of the screw compressor type depends on factors such as the desired level of air purity, the need for oil-free operation, energy efficiency requirements, and the operating conditions of the application.

China factory Portable Diesel Gasoline Electric Driven Combined Rotary Screw Air Compressors for Mining HP 20 250 Cfm Kw 7/8/10/13 Bar Construction Equipment with CE and ISO   manufacturer China factory Portable Diesel Gasoline Electric Driven Combined Rotary Screw Air Compressors for Mining HP 20 250 Cfm Kw 7/8/10/13 Bar Construction Equipment with CE and ISO   manufacturer
editor by CX 2024-04-08

China Good quality CHINAMFG Sh-220/8 High Quality 55kw 75HP Diesel Driven Portable Screw Air Compressor for Mining Drilling Rig with Hot selling

Product Description

Q1: What information do I need to provide to get the suitable machine?
1. How much air delivery capacity ( Unit:CFM or M3/Min )
2 How much working pressure ( Unit:PSI, Bar or Mpa )
3.What is the voltage and frequency of my country of residence ( V/Hz )
4. Whether I need other accessories such as air tank, filters and/or air dryers.
Tell us the answer, we will offer scheme for you!

Q2: What are the general unit conversion?
1bar = 0.1Mpa = 14.5psi 1m³/min = 35.32cfm 1KW = 1.34HP

Q3: Are you factory or trading company?
We are factory. Our factory is located in 39 Xihu (West Lake) Dis. Rd, HangZhou, ZHangZhoug

Q4: Which trade term can you accept?
FOB, CIF, CFR, EXW, etc.

Q5: How long will you take to arrange production?
15 days for Regular Products, 35 days for Customizing Models

SPECIFICATION

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Operation Training; Maintenance
Warranty: 2-Year-Warranty
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: Diesel Engine
Installation Type: Movable Type
Samples:
US$ 8800/set
1 set(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

Are There Regulations Governing the Use of Screw Compressors in Certain Industries?

Yes, there are regulations governing the use of screw compressors in certain industries. Here’s a detailed explanation:

1. Occupational Safety and Health Administration (OSHA):

In the United States, OSHA sets standards and regulations to ensure the safety and health of workers. While OSHA does not have specific regulations solely focused on screw compressors, they have general requirements that apply to compressed air systems, including screw compressors. These requirements cover aspects such as electrical safety, guarding of moving parts, and proper maintenance practices to ensure worker safety.

2. Environmental Protection Agency (EPA):

The EPA in the United States regulates air emissions to protect the environment and public health. While screw compressors themselves are not directly regulated, if the compressed air is used in processes that emit pollutants, such as in industrial manufacturing, the EPA may have regulations that apply to those specific industries or processes.

3. Industry-Specific Regulations:

Certain industries have specific regulations that govern the use of screw compressors or compressed air systems. These regulations are often aimed at ensuring product quality, safety, and environmental compliance. Some examples include:

a) Food and Beverage Industry: The food and beverage industry often has strict regulations to ensure product safety and prevent contamination. Compressed air used in processes such as packaging, conveying, or powering equipment may need to meet specific quality standards, such as those established by the Food and Drug Administration (FDA) or the Global Food Safety Initiative (GFSI).

b) Pharmaceutical Industry: The pharmaceutical industry has stringent regulations to ensure product quality, safety, and compliance with Good Manufacturing Practices (GMP). Compressed air used in pharmaceutical manufacturing processes must meet specific standards, such as those outlined in the United States Pharmacopeia (USP) or the European Pharmacopoeia (Ph. Eur.).

c) Electronics Industry: The electronics industry often requires clean and dry compressed air to prevent damage to sensitive electronic components. Standards such as ISO 8573, which specify air purity classes for different contaminants in compressed air systems, may be applicable.

d) Automotive Industry: The automotive industry may have regulations and standards related to the use of compressed air in manufacturing processes, such as painting or pneumatic tools. These regulations often focus on worker safety, product quality, and environmental compliance.

It’s important for organizations in these industries to be aware of and comply with the relevant regulations governing the use of screw compressors. Compliance helps ensure the safety of workers, product quality, environmental protection, and overall regulatory compliance.

It’s worth noting that regulations may vary by country and region, so it’s essential to consult the specific regulations applicable to the industry and location where the screw compressors are being used.

air compressor

What Is a Screw Compressor?

A screw compressor is a type of positive displacement compressor that operates based on the principle of rotary motion. Here’s a detailed explanation:

Working Principle:

A screw compressor consists of two helical rotors, typically called male and female rotors, that rotate in opposite directions within a housing. The rotors have specially designed profiles that interlock with each other, creating a series of compression chambers as they rotate. As the rotors rotate, the volume of these chambers decreases, compressing the air or gas trapped inside.

Compression Process:

As the air or gas enters the screw compressor, it gets trapped between the rotors’ lobes or threads. As the rotors continue to rotate, the trapped air or gas is carried along the length of the rotors and gradually compressed. The compression occurs continuously and smoothly as the air or gas moves from the suction side to the discharge side of the compressor. The interlocking rotors ensure a continuous flow of compressed air or gas without pulsation.

Oil-Injected and Oil-Free Variants:

Screw compressors are available in both oil-injected and oil-free variants. In oil-injected screw compressors, a small amount of lubricating oil is injected into the compression chamber to provide lubrication, cooling, and sealing between the rotors. The oil also helps in reducing friction and minimizing wear. Oil-injected screw compressors are commonly used in various industrial applications where a small amount of oil in the compressed air is acceptable.

On the other hand, oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors use specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and prevent the need for oil. Oil-free screw compressors are often favored in applications where oil-free and contaminant-free compressed air is essential, such as in food and beverage, pharmaceutical, and electronics industries.

Applications:

Screw compressors are widely used in various industries for a range of applications. They are commonly employed in manufacturing plants, refineries, power generation facilities, and other industrial settings to supply compressed air or gas for pneumatic tools, process equipment, air conditioning systems, and more. The ability of screw compressors to deliver a continuous flow of compressed air or gas makes them suitable for applications that require a steady and reliable source of compressed air.

Advantages:

Screw compressors offer several advantages compared to other types of compressors. They provide high efficiency and can deliver a large volume of compressed air or gas. The continuous compression process results in smooth operation with minimal pulsation. Additionally, screw compressors are known for their compact design, low vibration levels, and relatively quiet operation.

In summary, a screw compressor is a rotary positive displacement compressor that uses interlocking helical rotors to compress air or gas. It operates based on a continuous compression process and is available in both oil-injected and oil-free variants. Screw compressors find widespread use in various industries for applications that require a reliable source of compressed air or gas.

China Good quality CHINAMFG Sh-220/8 High Quality 55kw 75HP Diesel Driven Portable Screw Air Compressor for Mining Drilling Rig   with Hot sellingChina Good quality CHINAMFG Sh-220/8 High Quality 55kw 75HP Diesel Driven Portable Screw Air Compressor for Mining Drilling Rig   with Hot selling
editor by CX 2024-04-04

China Good quality Best Price 220V Mini Portable 1HP Medical Dental Silent Air Compressor Hot Mini Screw Car Air Compressor Pony Mini Direct Driven Air Compressor air compressor for sale

Product Description

Production Introduction:
This seires air compressor widely used in pneumatuic lock, pneumatic tool, tire inflation,blowing process,spray, paint,sand bklsting and fluidic element. 

1) Filling station can be used for fire brigade divers base inflatable station,

2) mine, oil field chemicals, ship, climbing, water sports center industry for human rescue,

3) fire fighting, rescue, underwater operations breathing gas filling is ideal in rescue equipment.

Detail machine pictures, all photoes are for 100% real shooting !
1, Product Show

2, Specification

 AIR COMPRESSOR

Model NO.

V-0.25/8D-150L

Motor Power

2.2/3/5.5(KW/HP)

Cylinder

 φ 65mmX2  

Speed

980rpm/min 

Tank

    150L/39.6Gal       

Pressure

8Bar/115 CHINAMFG

Capacity

250L/min(8.8CFM)  

Weight

118KG  

Dimension

1300X430X865mm  

3,Detail show

4, feature:

1) Well-designed specifically for small and medium sized users;

2) The operation is simple, convenient, and less prone to failure;

3) Designed for filling the air available for breathing;

4) Guarantee inflatable gas pure health, no the oil tasteless displacement, high-pressure air filling quickly;

5) Practices can be achieved without power, and to facilitate the field work;

6) Small size, light weight, easy to move quickly;

7) Cost-effective, economical and practical.

8, Company Information
HangZhou  CHINAMFG Machinery Co., Ltd is 1 of the large-scale woodworking machinery manufacturer in China. The company is located in Wangtai town. 

Our company is a comprehensive enterprise which is specialized in research and development, design, manufacturing, sale and service. With advanced production equipment and professional technical staff of research and development, and management. Which is formed a unique management model and the standardization of production process. 

The leading products of woodworking products are CNC router, panel saw series, sanding machine series, woodworking drill machine, Pur wrapping machine, paper sticking machine, vacuum laminating machine, edge banding machine, computer engraving machine and the other series and over 60 standards.  With the scientific management, unique technology, and innovative products to meet customer demands. Our products get a very high reputation from our customers at home and abroad.  Our products are sold across the country and to Russia, Ukraine, Middle-East, South Africa, Southeast Asia, Central Europe and the other countries and areas. We have earned the trust of customers and our product process is in the leading level among the same industry of domestic.  It creates a famous brand called “XINLIHUI” and our products sell well both at home and abroad. It is the most trusted brand to our customers. 
We would like to work a new CHINAMFG development with the insight colleagues and we welcome all the new and old friends to visit our company and crest a brilliant tomorrow together.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Samples:
US$ 140/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Oil-Free Screw Compressors Available?

Yes, oil-free screw compressors are available in the market to cater to applications where oil contamination is a concern. Here’s a detailed explanation:

Oil-free screw compressors, as the name suggests, are designed to operate without the use of lubricating oil in the compression chamber. These compressors offer several advantages in industries where oil-free compressed air or gas is required, such as in food and beverage, pharmaceutical, electronics, and certain manufacturing processes.

The key features and considerations of oil-free screw compressors include:

  • 1. Specialized Design: Oil-free screw compressors are designed with specialized materials, coatings, and sealing systems to eliminate the need for lubricating oil in the compression process. The rotors and other internal components are constructed to ensure minimal friction and wear, even in the absence of oil.
  • 2. Dry Compression: Unlike lubricated screw compressors, oil-free screw compressors rely on dry compression methods. The compression chamber is designed to achieve compression without the presence of oil, ensuring that the discharged air or gas is free from oil contaminants. This is particularly critical in industries where oil contamination can have detrimental effects on product quality or equipment performance.
  • 3. Sealing Technology: Oil-free screw compressors employ advanced sealing technologies to prevent air or gas leakage between the high-pressure and low-pressure sides of the compressor. These sealing systems ensure efficient compression while maintaining the required clearances between the rotors and the compressor housing.
  • 4. Cooling Systems: Oil-free screw compressors utilize alternative cooling methods, such as air or water cooling, to dissipate the heat generated during compression. Efficient cooling is crucial to prevent overheating and ensure reliable operation.
  • 5. Filtration Systems: Oil-free compressors often incorporate high-quality filtration systems to remove particulates, moisture, and other contaminants from the incoming air or gas. These filtration systems help maintain the integrity of the compressor and ensure the delivery of clean, oil-free compressed air or gas.
  • 6. Application-Specific Solutions: Oil-free screw compressors are available in various sizes and configurations to meet specific application requirements. They can be tailored to deliver the desired air or gas flow rates, pressures, and purity levels.

It’s important to note that oil-free screw compressors generally have higher initial costs compared to lubricated compressors due to their specialized design and materials. However, they offer benefits such as reduced maintenance, minimized risk of oil contamination, and compliance with stringent industry standards or regulations.

When considering an oil-free screw compressor, it’s crucial to assess the specific application needs, air quality requirements, and operating conditions. Consulting with manufacturers or suppliers can help in selecting the most suitable oil-free screw compressor for a particular industry or process.

In summary, oil-free screw compressors are available and offer a reliable and efficient solution for applications where oil-free compressed air or gas is essential. These compressors are designed with specialized features to ensure dry compression, reliable sealing, effective cooling, and high-quality filtration.

air compressor

What Is the Impact of Ambient Temperature on Screw Compressor Performance?

Ambient temperature has a significant impact on the performance of screw compressors. Here’s a detailed explanation:

Screw compressors, like other types of compressors, rely on the surrounding environment to dissipate heat and maintain optimal operating conditions. The ambient temperature directly affects the compressor’s efficiency, capacity, power consumption, and overall performance.

Here are the key ways in which ambient temperature influences screw compressor performance:

1. Cooling Efficiency:

The cooling efficiency of a screw compressor is affected by the temperature difference between the compressed gas and the ambient air. As the ambient temperature increases, the temperature difference decreases, making it more challenging to transfer heat effectively. This can lead to higher discharge temperatures and reduced cooling efficiency, potentially impacting the compressor’s overall capacity and performance.

2. Capacity and Power Consumption:

Higher ambient temperatures can decrease the capacity of a screw compressor. Compressors are typically designed and rated based on specific operating conditions, including a defined ambient temperature range. When the ambient temperature exceeds the design limits, the compressor may experience reduced volumetric efficiency, resulting in a decrease in its overall capacity. Additionally, the compressor may require more power to maintain the desired pressure levels, leading to increased power consumption.

3. Heat Recovery:

In some applications, screw compressors are equipped with heat recovery systems to utilize the waste heat generated during compression. The effectiveness of heat recovery is influenced by the ambient temperature. Higher ambient temperatures can reduce the temperature differential available for heat exchange, limiting the potential for heat recovery and decreasing the overall system efficiency.

4. Lubrication and Cooling:

Screw compressors rely on lubrication systems to reduce friction and prevent wear between moving parts. The ambient temperature affects the performance of the lubricant. In high ambient temperatures, the lubricant may experience decreased viscosity, potentially leading to inadequate lubrication and increased wear on compressor components. Similarly, the cooling system of the compressor, including fans and heat exchangers, may be less effective in higher ambient temperatures, impacting the compressor’s ability to dissipate heat.

5. Operating Envelope:

Screw compressors have specified operating envelopes, which define the acceptable range of operating conditions, including ambient temperature. Operating the compressor outside its designed ambient temperature range can result in reduced reliability, increased maintenance requirements, and potential system failures. It is crucial to adhere to the manufacturer’s guidelines and ensure that the compressor operates within the recommended ambient temperature limits.

6. Control and Protection:

Modern screw compressors often feature advanced control and protection systems that monitor various parameters, including ambient temperature. These systems may adjust compressor operation, such as modulation of capacity or cooling strategies, to optimize performance and protect the compressor from operating outside safe limits. Understanding the impact of ambient temperature allows for appropriate adjustments and settings to maintain reliable and efficient compressor operation.

It’s important to note that different compressor models and manufacturers may have specific performance characteristics and operating limits. Therefore, consulting the manufacturer’s documentation and guidelines for the particular screw compressor in use is essential.

In summary, ambient temperature significantly affects the performance of screw compressors. Higher ambient temperatures can reduce cooling efficiency, decrease compressor capacity, increase power consumption, and impact lubrication and cooling systems. Adhering to recommended operating conditions and considering ambient temperature limitations are crucial for ensuring optimal performance, reliability, and longevity of screw compressors.

air compressor

What Are the Maintenance Requirements for Screw Compressors?

Screw compressors require regular maintenance to ensure optimal performance, reliability, and longevity. Here’s a detailed overview of the maintenance requirements for screw compressors:

  • 1. Lubrication: Screw compressors rely on proper lubrication to reduce friction, minimize wear, and maintain efficient operation. Regular lubrication of the rotor bearings, seals, and other moving parts is essential. The type and frequency of lubrication may vary depending on the compressor’s design and manufacturer’s recommendations.
  • 2. Filter Replacement: Screw compressors have intake filters that prevent dust, debris, and contaminants from entering the compression chamber. These filters need to be inspected regularly and replaced or cleaned as necessary to ensure unrestricted airflow and prevent damage to the compressor components.
  • 3. Cooling System Maintenance: Screw compressors may have cooling systems, such as air or water coolers, to dissipate heat generated during compression. The cooling system should be inspected periodically, and any blockages or leaks should be addressed promptly to maintain optimal cooling efficiency.
  • 4. Inspection of Belts and Couplings: If the screw compressor is belt-driven or connected through couplings, regular inspection of belts, pulleys, and couplings is necessary. Worn or damaged belts should be replaced, and couplings should be checked for alignment and tightness to ensure smooth power transmission.
  • 5. Cleaning of Heat Exchangers: Heat exchangers in screw compressors, such as intercoolers and aftercoolers, can accumulate dirt, scale, and other deposits over time. Regular cleaning of these heat exchangers is important to maintain their heat transfer efficiency and prevent overheating of the compressed air or gas.
  • 6. Inspection of Seals and Gaskets: The seals and gaskets in a screw compressor play a critical role in maintaining proper compression and preventing air or gas leakage. Regular inspection of these components is necessary to detect any signs of wear, damage, or leakage. Faulty seals or gaskets should be replaced promptly to maintain the compressor’s efficiency.
  • 7. Regular Performance Testing: Periodic performance testing of screw compressors is recommended to assess their operating parameters, such as discharge pressure, flow rate, and power consumption. This helps identify any deviations from the expected performance and allows for adjustments or repairs as needed.

It’s important to note that the specific maintenance requirements for screw compressors may vary depending on the compressor’s design, manufacturer’s recommendations, operating conditions, and usage. Consulting the compressor’s manual and following the manufacturer’s guidelines is crucial for maintaining the compressor effectively and ensuring its reliable operation over time.

China Good quality Best Price 220V Mini Portable 1HP Medical Dental Silent Air Compressor Hot Mini Screw Car Air Compressor Pony Mini Direct Driven Air Compressor   air compressor for saleChina Good quality Best Price 220V Mini Portable 1HP Medical Dental Silent Air Compressor Hot Mini Screw Car Air Compressor Pony Mini Direct Driven Air Compressor   air compressor for sale
editor by CX 2024-03-29

China high quality China Manufacture High Quality 7.5kw -250kw Industrial Single Rotary Direct Driven Screw Type Air Compressor with Low Noise with Best Sales

Product Description

China Manufacture High Quality 7.5KW -250KW Industrial Single Rotary Direct Driven Screw Type Air Compressor with Low Noise

Product Description

Noise enclosure
It is designed into fully-closed mute box, in which sound-absorbing sponge are attached for effective absorption of noise,thereby making the noise 3-5dB(A) lower than that made by the compressors of the same kind.It is reasonably structured overall and very easy to maintain and repair. 

Control Panel
Intelligent microcomputer-based control technology can monitor and control in all aspects the complete machine following your instructions. Remote control realizes unattended operation, and the user-friendly human-machine interface displays instructions and parameters in written form. Also, it can function to self diagnose faults,give warning and automatically regulate the capacity. 

Motor 
First-class motors are adopted, with the level of protection being IP54 and insulation level being F.overall and very easy to maintain and repair. 

Cooler 
It is designed for low temperature difference to increase heat exchange area, and ideal to be applied to high-temperature and high-humidity operating environment. 

Configuration characteristics 
1. A precisely-made central bracket is used to keep the motor aligned permanently with the bare compressor
2. A highly resilient coupling is adopted to make the compressor operate smoothly, and the elastomer is long in useful life
3. The exhaust pipe adopts double-layer bellows, and the oil circuit adopts specially-made temperature-resistant 125º C high-pressure hose
4. For the extremely high temperature condition in some districts, the large-area plate heat exchange and high-efficiency water chiller are used
5. High-quality shaft coupling elastic body can buffer and compensate for the imbalanced moment of operation. 

Product Parameters

 

Model

Air flow

pressure

Motor power

Caliber

Noise

Cooling air volume

Cooling water

m ³/min

MPa

kW

dB(A)

m ³/min

L/min

XA-7GA

1.35

0.7

7.5

G1/2

62±2

32.5

 

1.25

0.8

1.01

1

0.9

1.25

XA-11GA

1.8

0.7

11

G3/4

63±2

50

1.78

0.8

1.55

1

1.3

1.25

XA-15GA

2.5

0.7

15

G3/4

63±2

50

2.4

0.8

2.1

1

1.8

1.25

XA-18GA

3.1

0.7

18.5

G1

64±2

100

3

0.8

2.7

1

2.3

1.25

XA-22GA/W

3.8

0.7

22

G1

64±2

110

14.5

3.7

0.8

3.2

1

2.8

1.25

XA-30GA/W

5.4

0.7

30

G1

65±2

145

20

5.25

0.8

4.5

1

3.9

1.25

XA-37GA/W

6.6

0.7

37

G1 ½

65±2

145

25

6.6

0.8

5.9

1

4.8

1.25

XA-45GA/W

8.4

0.7

45

G1 ½

66±2

185

30

8

0.8

7.4

1

6.4

1.25

XA-55GA/W

10.8

0.7

55

G2

68±2

220

39.9

10

0.8

9.1

1

8

1.25

XA-75GA/W

13.8

0.7

75

G2

72±2

250

51

13

0.8

11.8

1

10.3

1.25

XA-90GA/W

17.1

0.7

90

G2

72±2

270

61

17

0.8

15.2

1

12.5

1.25

XA-110GA/W

21.2

0.7

110

G2 1/2

75±2

420

79

20

0.8

17.1

1

15.4

1.25

XA-132GA/W

25

0.7

132

G2 1/2

75±2

460

91

24.3

0.8

21

1

17.5

1.25

XA-160GA/W

30.5

0.7

160

G2 1/2

75±2

510

105

29.2

0.8

26.9

1

22.5

1.25

XA-185GA/W

32.9

0.7

185

G2 1/2

75±2

510

123

31.9

0.8

29.1

1

25.5

1.25

XA-220GA/W

37

0.7

220

DN80

75±2

710

144

36.3

0.8

31.63

1

28.55

1.25

XA-250GA/W

45.8

0.7

250

DN80

75±2

800

163

44

0.8

39

1

35.5

1.25

Product Picture

Company Profile

FAQ

1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted.
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, GOST, EPA(USA)CCC.
3: What about the delivery time?
A: 7-30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 PCS.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Overseas Service Center Available
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Water Cooling
Power Source: AC Power
Cylinder Position: Vertical

air compressor

What Is the Noise Level of Screw Compressors?

The noise level of screw compressors can vary depending on several factors, including the compressor’s size, design, operating conditions, and the presence of noise-reducing features. Here’s a detailed explanation:

Screw compressors are known for their relatively low noise levels compared to other types of compressors, such as reciprocating compressors. However, the actual noise level can still vary depending on the specific compressor model and its operating parameters.

The noise level of screw compressors is typically measured in decibels (dB) and can range from around 60 dB to 90 dB or higher. It’s important to note that the noise level is logarithmic, meaning that a small increase in decibel level represents a significant increase in perceived noise intensity.

Several factors can influence the noise level of screw compressors:

  • 1. Compressor Size and Design: Larger screw compressors tend to produce higher noise levels compared to smaller ones. This is because larger compressors generally have more powerful motors and larger rotating components, which can generate more noise. The design of the compressor, including the type of rotor profiles and the presence of noise-reducing features, can also impact the noise level.
  • 2. Operating Conditions: The operating conditions of the compressor, such as the speed of rotation and the discharge pressure, can affect the noise level. Higher speeds and pressures may result in increased noise production. Additionally, the presence of pulsations or vibrations in the system can contribute to noise generation.
  • 3. Sound Insulation and Enclosures: Some screw compressors come with built-in sound insulation or enclosures to reduce noise levels. These features help contain the noise within the compressor unit and minimize the propagation of noise to the surrounding environment. Compressors equipped with sound insulation or enclosures generally have lower noise levels compared to open-frame compressors.
  • 4. Installation and Surrounding Environment: The installation of the compressor and the characteristics of the surrounding environment can influence the perceived noise level. Factors such as the proximity of the compressor to sensitive areas, the presence of sound-absorbing materials, and the layout of the facility can impact the noise propagation and overall noise perception.
  • 5. Maintenance and Wear: Proper maintenance of the compressor, including regular inspection and lubrication of components, can help minimize noise levels. Wear and tear on the compressor’s internal parts can lead to increased noise production, so timely repairs or component replacements are important to maintain optimal performance and minimize noise.

It’s worth noting that noise levels are typically provided by manufacturers as specifications for each compressor model. These specifications can help users select compressors with noise levels that meet their specific requirements or comply with local noise regulations.

In summary, the noise level of screw compressors can range from around 60 dB to 90 dB or higher, depending on factors such as compressor size, design, operating conditions, and the presence of noise-reducing features. Proper installation, maintenance, and the use of sound insulation or enclosures can help minimize noise levels and create a more comfortable and quieter operating environment.

air compressor

What Is the Role of Control Systems in Screw Compressor Operation?

Control systems play a crucial role in the operation of screw compressors. Here’s a detailed explanation:

Screw compressors are complex machines that require precise control and monitoring for optimal performance and efficiency. Control systems provide the necessary intelligence and automation to regulate various aspects of screw compressor operation. Here are the key roles of control systems:

1. Start-up and Shutdown Control:

Control systems manage the start-up and shutdown sequences of screw compressors. During start-up, the control system ensures a gradual ramp-up of motor speed and system pressure to prevent sudden surges and excessive wear on components. During shutdown, it safely brings the compressor to a stop and performs necessary cooling and ventilation processes.

2. Load and Unload Control:

Screw compressors often feature load and unload operation to match compressed air supply with demand. The control system monitors system pressure, flow requirements, and other parameters to determine when to load or unload the compressor. It engages or disengages the compressor’s capacity control mechanism, such as inlet modulation valves or variable-speed drives, to maintain optimal operation at varying loads.

3. Pressure Control:

Control systems regulate the discharge pressure of screw compressors. They continuously monitor the system pressure and adjust compressor operation to maintain the desired pressure setpoint. The control system modulates the compressor’s capacity, adjusts the speed of the drive motor, or controls the opening and closing of inlet or discharge valves to achieve the target pressure.

4. Temperature Control:

Control systems monitor and control various temperature parameters within the screw compressor system. They ensure that the compressor operates within safe temperature limits by monitoring coolant temperatures, lubricant temperatures, and interstage or discharge temperatures. If temperature limits are exceeded, the control system may activate cooling mechanisms, adjust operating parameters, or trigger alarms and shutdowns to prevent damage.

5. Monitoring and Protection:

Control systems provide comprehensive monitoring and protection functions for screw compressors. They continuously collect data from various sensors and instruments, such as pressure sensors, temperature sensors, vibration sensors, and current sensors. The control system analyzes this data to detect abnormalities, malfunctions, or potential failures. It can initiate alarms, shutdowns, or safety interlocks to protect the compressor and associated equipment.

6. Energy Management:

Control systems optimize energy efficiency in screw compressor operation. They analyze system demand, performance characteristics, and energy consumption to make intelligent decisions regarding load modulation, capacity control, and motor speed adjustments. By optimizing the compressor’s operation, the control system helps reduce energy consumption, operating costs, and environmental impact.

7. Remote Monitoring and Control:

Modern control systems often offer remote monitoring and control capabilities. They can be integrated into supervisory control and data acquisition (SCADA) systems or connected to networked platforms. Remote access allows operators to monitor compressor performance, adjust operating parameters, receive alarms, and perform diagnostics from a central control room or via mobile devices.

In summary, control systems play a vital role in the operation of screw compressors by providing intelligent control, monitoring, and protection. They manage start-up and shutdown sequences, regulate load and unload operation, control pressure and temperature, monitor system parameters, optimize energy efficiency, and enable remote monitoring and control. By effectively managing the compressor’s operation, control systems contribute to reliable performance, energy efficiency, and overall system optimization.

air compressor

Can Screw Compressors Handle High-Pressure Applications?

Yes, screw compressors are capable of handling high-pressure applications. Here’s a detailed explanation:

Screw compressors are known for their ability to deliver high-pressure compressed air or gas. The design of screw compressors allows them to achieve higher pressure ratios compared to other types of compressors, such as reciprocating piston compressors.

The compression process in screw compressors is continuous and smooth, which enables them to handle high-pressure requirements efficiently. The intermeshing rotors create compression chambers that gradually reduce in volume, resulting in the compression of air or gas. By adjusting the rotational speed of the rotors and optimizing the design parameters, screw compressors can generate the desired high discharge pressures.

However, it’s important to note that the maximum pressure capability of a screw compressor may vary depending on factors such as:

  • 1. Compressor Design: The design features of the screw compressor, including the rotor profile, sealing mechanism, and cooling system, can influence its maximum pressure capacity.
  • 2. Rotor Size and Speed: The size and rotational speed of the rotors impact the compression ratio and, consequently, the achievable discharge pressure. Larger rotors and higher rotational speeds generally allow for higher pressure ratios.
  • 3. Drive Power: The power of the drive motor connected to the screw compressor affects its ability to handle high-pressure applications. Adequate power is necessary to overcome the resistance and maintain the desired compression ratio.
  • 4. Structural Integrity: The structural integrity and material strength of the compressor housing, rotors, and other components determine the maximum pressure that the compressor can withstand without failure or leakage.

It’s important to select a screw compressor with the appropriate specifications and consult the manufacturer’s guidelines to ensure that it can handle the specific high-pressure requirements of the application.

Additionally, it’s worth noting that high-pressure applications may also require additional equipment, such as pressure vessels or downstream pressure regulators, to safely handle and control the compressed air or gas at the desired pressure levels.

China high quality China Manufacture High Quality 7.5kw -250kw Industrial Single Rotary Direct Driven Screw Type Air Compressor with Low Noise   with Best SalesChina high quality China Manufacture High Quality 7.5kw -250kw Industrial Single Rotary Direct Driven Screw Type Air Compressor with Low Noise   with Best Sales
editor by CX 2024-03-29

China Best Sales 103kw SDP350G Diesel driven Portable Screw Air Compressor used for drilling,sandblasting industrial use 12v air compressor

Product Description

103kw SDP350G Diesel driven Portable Screw Air Compressor used for drilling,sandblasting industrial use

Product Parameters

 

Model SDP 
185E
SDP 
250E
SDP 
350E
SDP 
350G
SDP 
420E
SDP 
460G
SDP 
560G II
SDP 
420H II
SDP 
550G
SDP 
530G
SDP 
600H
Discharge Air  Volume(m³/min) 5 7 10 10 12 13 16 12 16 15 17
Discharge Pressure(MPa) 0.7 0.8 0.8 1.3 0.8 1.3 1.3 1.7 1.4 1.3 1..7
Discharge Pipc . Dia 1*1-1/4″ 1*3/4″ 1*1-1/2″ 1*2″
Discharge Tessure 110ºC
Gas Oil Contet ≤5PPM
Unit Drive Way Direct Driven
Diesel Engine Parameters Model V2403-T YC4DK95-H3DD WP4.1G140E331 WPG160E331 TAD552VE WP6G190E330 WP6G240E330
Power(Kw) 33 70 103 118 160 140 176
Speed(r/min) 2000 2300 2000 2300 2300 1800 2200 2100
Displacement(L) 2.6 3.621 4.088 4.5 5.1 6.75
Dimension Overall Length (mm) 3840 3170 3700 3700 3900 4300 4400
W/O Towber(mm) 2100 2250 2500 2500 2900 3100 3300
Width(mm) 1490 1600 1960 1960 1900 1900 1900
Height(mm) 1780 1650 2000 2000 2100 2200 2100
Unit Weight(KG) 1270 1650 2000 2200 2800 2610 2710 2950 3000

Detailed Photos

1.Brand Screw air end
Large rotors,low rpm,long life span
High efficiency,low noise,low vibration,high reliability
Bearing life over 100,000 hours
Little leakage triangle,low power/airflow ratio
Less wearing parts,low maintenance cost

2.Diesel engine
High efficiency air-cooling totally enclosed motor
Large starting torque
Low noise,better structure
Original imported bearing
Low rpm

3.Brand Intake Valve Assembie
Non-load starting,butterfly inlet comtrolling valve
0~100% stepless volume regulation,aluminium alloy unibody casing
With Non-return value for heavy load,piston mover
Non-return value close under urgent stop or power failure

4.Air Filter
Air filter from Mann Hummel Germany
Dust removal 99.9%,filtering fineness 3 μm
Ensuring the clean air for inlet
Prolonging the life span of air system,large size,over 3000 hours

5.Oil System
Oil Filter from Mann Hummel Germany
Reliably removing the dust in oil
Oil fineness less then 0.1 μm
Ensuring the clearness and lubrication of oil system,good cooling function

Product Description

Company Profile

HangZhou CHINAMFG Compressor Co., Ltd is a leading CHINAMFG manufacturer in HangZhou, China. We focus on the research & Develop and manufacture of screw air compressors and related after-treatment equipment over 18 years experience. Our screw compressors include air & Water cooled compressor, belt & Direct driven compressor, permanent magnet inverter compressor, low pressure compressor, oil free compressor, diesel driven portable compressor. Our products have passed ISO9001 certificate. We offer you world-class products with advanced features, competitive price, and reliable quality and on time delivery. We always make superior quality CHINAMFG because of adopting Germany advanced production technology and European famous brands machine parts for compressors. CHINAMFG COMPROSS has an experienced expert team, not only provide users with high-quality and high-efficiency compressed air system equipment, but also provide users with optimum air system solutions during before-sale, sale and after-sale services. In China Market, our compressor has become the preferred choice to customer through technical superiority, strong sales network and excellent after-sales service. In the world market, our products are available in 40 countries covering Europe, North America, South America Australia, Asia, Africa, and Middle-East. Welcome more agents and dealers join us and make long term cooperation!

                   
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 12 months
Warranty: 12 months
Lubrication Style: Lubricated
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Oil-Free Screw Compressors Available?

Yes, oil-free screw compressors are available in the market to cater to applications where oil contamination is a concern. Here’s a detailed explanation:

Oil-free screw compressors, as the name suggests, are designed to operate without the use of lubricating oil in the compression chamber. These compressors offer several advantages in industries where oil-free compressed air or gas is required, such as in food and beverage, pharmaceutical, electronics, and certain manufacturing processes.

The key features and considerations of oil-free screw compressors include:

  • 1. Specialized Design: Oil-free screw compressors are designed with specialized materials, coatings, and sealing systems to eliminate the need for lubricating oil in the compression process. The rotors and other internal components are constructed to ensure minimal friction and wear, even in the absence of oil.
  • 2. Dry Compression: Unlike lubricated screw compressors, oil-free screw compressors rely on dry compression methods. The compression chamber is designed to achieve compression without the presence of oil, ensuring that the discharged air or gas is free from oil contaminants. This is particularly critical in industries where oil contamination can have detrimental effects on product quality or equipment performance.
  • 3. Sealing Technology: Oil-free screw compressors employ advanced sealing technologies to prevent air or gas leakage between the high-pressure and low-pressure sides of the compressor. These sealing systems ensure efficient compression while maintaining the required clearances between the rotors and the compressor housing.
  • 4. Cooling Systems: Oil-free screw compressors utilize alternative cooling methods, such as air or water cooling, to dissipate the heat generated during compression. Efficient cooling is crucial to prevent overheating and ensure reliable operation.
  • 5. Filtration Systems: Oil-free compressors often incorporate high-quality filtration systems to remove particulates, moisture, and other contaminants from the incoming air or gas. These filtration systems help maintain the integrity of the compressor and ensure the delivery of clean, oil-free compressed air or gas.
  • 6. Application-Specific Solutions: Oil-free screw compressors are available in various sizes and configurations to meet specific application requirements. They can be tailored to deliver the desired air or gas flow rates, pressures, and purity levels.

It’s important to note that oil-free screw compressors generally have higher initial costs compared to lubricated compressors due to their specialized design and materials. However, they offer benefits such as reduced maintenance, minimized risk of oil contamination, and compliance with stringent industry standards or regulations.

When considering an oil-free screw compressor, it’s crucial to assess the specific application needs, air quality requirements, and operating conditions. Consulting with manufacturers or suppliers can help in selecting the most suitable oil-free screw compressor for a particular industry or process.

In summary, oil-free screw compressors are available and offer a reliable and efficient solution for applications where oil-free compressed air or gas is essential. These compressors are designed with specialized features to ensure dry compression, reliable sealing, effective cooling, and high-quality filtration.

air compressor

What Is the Impact of Ambient Temperature on Screw Compressor Performance?

Ambient temperature has a significant impact on the performance of screw compressors. Here’s a detailed explanation:

Screw compressors, like other types of compressors, rely on the surrounding environment to dissipate heat and maintain optimal operating conditions. The ambient temperature directly affects the compressor’s efficiency, capacity, power consumption, and overall performance.

Here are the key ways in which ambient temperature influences screw compressor performance:

1. Cooling Efficiency:

The cooling efficiency of a screw compressor is affected by the temperature difference between the compressed gas and the ambient air. As the ambient temperature increases, the temperature difference decreases, making it more challenging to transfer heat effectively. This can lead to higher discharge temperatures and reduced cooling efficiency, potentially impacting the compressor’s overall capacity and performance.

2. Capacity and Power Consumption:

Higher ambient temperatures can decrease the capacity of a screw compressor. Compressors are typically designed and rated based on specific operating conditions, including a defined ambient temperature range. When the ambient temperature exceeds the design limits, the compressor may experience reduced volumetric efficiency, resulting in a decrease in its overall capacity. Additionally, the compressor may require more power to maintain the desired pressure levels, leading to increased power consumption.

3. Heat Recovery:

In some applications, screw compressors are equipped with heat recovery systems to utilize the waste heat generated during compression. The effectiveness of heat recovery is influenced by the ambient temperature. Higher ambient temperatures can reduce the temperature differential available for heat exchange, limiting the potential for heat recovery and decreasing the overall system efficiency.

4. Lubrication and Cooling:

Screw compressors rely on lubrication systems to reduce friction and prevent wear between moving parts. The ambient temperature affects the performance of the lubricant. In high ambient temperatures, the lubricant may experience decreased viscosity, potentially leading to inadequate lubrication and increased wear on compressor components. Similarly, the cooling system of the compressor, including fans and heat exchangers, may be less effective in higher ambient temperatures, impacting the compressor’s ability to dissipate heat.

5. Operating Envelope:

Screw compressors have specified operating envelopes, which define the acceptable range of operating conditions, including ambient temperature. Operating the compressor outside its designed ambient temperature range can result in reduced reliability, increased maintenance requirements, and potential system failures. It is crucial to adhere to the manufacturer’s guidelines and ensure that the compressor operates within the recommended ambient temperature limits.

6. Control and Protection:

Modern screw compressors often feature advanced control and protection systems that monitor various parameters, including ambient temperature. These systems may adjust compressor operation, such as modulation of capacity or cooling strategies, to optimize performance and protect the compressor from operating outside safe limits. Understanding the impact of ambient temperature allows for appropriate adjustments and settings to maintain reliable and efficient compressor operation.

It’s important to note that different compressor models and manufacturers may have specific performance characteristics and operating limits. Therefore, consulting the manufacturer’s documentation and guidelines for the particular screw compressor in use is essential.

In summary, ambient temperature significantly affects the performance of screw compressors. Higher ambient temperatures can reduce cooling efficiency, decrease compressor capacity, increase power consumption, and impact lubrication and cooling systems. Adhering to recommended operating conditions and considering ambient temperature limitations are crucial for ensuring optimal performance, reliability, and longevity of screw compressors.

air compressor

What Is a Screw Compressor?

A screw compressor is a type of positive displacement compressor that operates based on the principle of rotary motion. Here’s a detailed explanation:

Working Principle:

A screw compressor consists of two helical rotors, typically called male and female rotors, that rotate in opposite directions within a housing. The rotors have specially designed profiles that interlock with each other, creating a series of compression chambers as they rotate. As the rotors rotate, the volume of these chambers decreases, compressing the air or gas trapped inside.

Compression Process:

As the air or gas enters the screw compressor, it gets trapped between the rotors’ lobes or threads. As the rotors continue to rotate, the trapped air or gas is carried along the length of the rotors and gradually compressed. The compression occurs continuously and smoothly as the air or gas moves from the suction side to the discharge side of the compressor. The interlocking rotors ensure a continuous flow of compressed air or gas without pulsation.

Oil-Injected and Oil-Free Variants:

Screw compressors are available in both oil-injected and oil-free variants. In oil-injected screw compressors, a small amount of lubricating oil is injected into the compression chamber to provide lubrication, cooling, and sealing between the rotors. The oil also helps in reducing friction and minimizing wear. Oil-injected screw compressors are commonly used in various industrial applications where a small amount of oil in the compressed air is acceptable.

On the other hand, oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors use specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and prevent the need for oil. Oil-free screw compressors are often favored in applications where oil-free and contaminant-free compressed air is essential, such as in food and beverage, pharmaceutical, and electronics industries.

Applications:

Screw compressors are widely used in various industries for a range of applications. They are commonly employed in manufacturing plants, refineries, power generation facilities, and other industrial settings to supply compressed air or gas for pneumatic tools, process equipment, air conditioning systems, and more. The ability of screw compressors to deliver a continuous flow of compressed air or gas makes them suitable for applications that require a steady and reliable source of compressed air.

Advantages:

Screw compressors offer several advantages compared to other types of compressors. They provide high efficiency and can deliver a large volume of compressed air or gas. The continuous compression process results in smooth operation with minimal pulsation. Additionally, screw compressors are known for their compact design, low vibration levels, and relatively quiet operation.

In summary, a screw compressor is a rotary positive displacement compressor that uses interlocking helical rotors to compress air or gas. It operates based on a continuous compression process and is available in both oil-injected and oil-free variants. Screw compressors find widespread use in various industries for applications that require a reliable source of compressed air or gas.

China Best Sales 103kw SDP350G Diesel driven Portable Screw Air Compressor used for drilling,sandblasting industrial use   12v air compressorChina Best Sales 103kw SDP350G Diesel driven Portable Screw Air Compressor used for drilling,sandblasting industrial use   12v air compressor
editor by CX 2024-03-28

China Hot selling Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Direct Driven Double Screw Air Compressor with Affordable Price with Best Sales

Product Description

30HP 22KW Pm Oil Cooled  Energy Saving Screw Air Compressor

Technical Parameters Of PM Variable speed screw air compressor:
 

Model WZS-20EVA
Air Flow/Working pressure 2.2m3/min @ 8bar
1.8m3/min @ 10bar
Cooling type of COMPRESSOR Air cooling
Cooling type of MOTOR Air cooling
Driven method Direct Driven
Start way Soft VSD Start
VSD inverter HOLIP / VEICHI
Exhaust Temp. < ambient temp. +8 degrees
Oil content <2ppm
Noise 63±2 dB(A)
Power 380VAC/3ph/0~2
Web: compressor /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24/7 Service Support
Warranty: Unit 1 Year, Air End 2 Years
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Customization:
Available

|

air compressor

What Industries Commonly Use Screw Compressors?

Screw compressors are widely used in various industries due to their efficiency, reliability, and versatility. Here’s a detailed overview of the industries that commonly utilize screw compressors:

  • 1. Manufacturing: Screw compressors find extensive use in manufacturing industries such as automotive, aerospace, electronics, and appliances. They are employed for applications such as powering pneumatic tools, operating production lines, providing compressed air for painting, and controlling automated processes.
  • 2. Oil and Gas: The oil and gas industry extensively utilizes screw compressors for various purposes. They are employed in upstream operations for natural gas gathering, gas lift systems, and wellhead compression. In downstream operations, screw compressors are used in refining processes, gas transmission, and storage facilities.
  • 3. Chemical and Petrochemical: Screw compressors play a crucial role in chemical and petrochemical industries. They are used for compressing gases in chemical reactions, providing instrument air for control systems, powering pneumatic conveying systems, and handling various process gases in refining and production processes.
  • 4. Food and Beverage: Screw compressors are employed in the food and beverage industry for applications such as refrigeration, freezing, and air supply for packaging processes. They help maintain optimal temperature and humidity conditions, ensuring the quality and safety of food and beverage products.
  • 5. Pharmaceutical and Healthcare: Screw compressors are utilized in pharmaceutical manufacturing facilities, research laboratories, and healthcare institutions. They provide clean, oil-free compressed air for critical processes, such as pharmaceutical production, medical device manufacturing, and laboratory analysis. High-quality compressed air is essential to meet stringent quality and regulatory standards in these industries.
  • 6. Power Generation: Screw compressors find applications in power generation facilities, including gas turbine power plants, combined heat and power (CHP) systems, and cogeneration plants. They are used for inlet air compression, fuel gas boosting, and other compressed air requirements in power generation processes.
  • 7. Construction and Mining: Screw compressors are widely used in construction and mining industries for powering pneumatic tools, drilling equipment, and material handling systems. They provide the necessary compressed air for efficient and reliable operation in demanding construction and mining environments.
  • 8. Municipal and Wastewater Treatment: Screw compressors are utilized in municipal water treatment and wastewater treatment plants. They play a vital role in aeration processes, where compressed air is introduced into water or wastewater to promote biological treatment and ensure effective removal of contaminants.
  • 9. Printing and Packaging: Screw compressors are employed in printing and packaging industries for applications such as air drying, air cushioning, and powering pneumatic systems in printing presses and packaging machinery. They ensure consistent and reliable compressed air supply for efficient production processes.
  • 10. Automotive and Transportation: Screw compressors are used in automotive and transportation industries for applications such as air conditioning systems in vehicles, pneumatic braking systems, and compressed air supply for tire inflation and maintenance.

These are just a few examples, and screw compressors find applications in numerous other industries, including textiles, plastics, pulp and paper, steel and metal fabrication, electronics manufacturing, and more. The versatility and reliability of screw compressors make them a popular choice across a wide range of industrial sectors.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

What Are the Advantages of Using a Screw Compressor?

Using a screw compressor offers several advantages in various applications. Here’s a detailed explanation:

High Efficiency:

Screw compressors are known for their high efficiency in converting electrical power into compressed air or gas. The rotary positive displacement design of screw compressors allows them to deliver a large volume of compressed air or gas with minimal energy loss. This high efficiency results in cost savings and reduced energy consumption compared to other types of compressors.

Continuous Operation:

One of the key advantages of screw compressors is their ability to provide a continuous flow of compressed air or gas. The interlocking helical rotors ensure a smooth and continuous compression process without pulsations. This feature is particularly beneficial in applications that require a steady and reliable source of compressed air, such as in manufacturing plants and industrial processes.

Compact Design:

Screw compressors are known for their compact design, which allows for space-saving installation. They have a relatively small footprint compared to other types of compressors, making them suitable for applications where space is limited. The compact design also facilitates ease of installation and integration into existing systems.

Low Vibration and Noise Levels:

Screw compressors are designed to operate with low vibration levels, resulting in smooth and quiet operation. The interlocking rotors and balanced design help in minimizing vibrations, reducing the need for additional vibration isolation measures. The low noise levels make screw compressors suitable for applications where noise reduction is important, such as in office environments or noise-sensitive industrial settings.

Wide Range of Capacities:

Screw compressors are available in a wide range of capacities, allowing for flexibility in meeting different compressed air or gas requirements. Whether it’s a small-scale application or a large industrial process, there are screw compressors available to match the specific capacity needs. This versatility makes screw compressors suitable for a variety of industries and applications.

Oil-Injected and Oil-Free Options:

Screw compressors are offered in both oil-injected and oil-free variants, providing options to meet different application requirements. Oil-injected screw compressors use lubricating oil for cooling, sealing, and reducing friction between the rotors. They are commonly used in industrial applications where a small amount of oil in the compressed air is acceptable. Oil-free screw compressors, on the other hand, eliminate the need for oil and provide contaminant-free compressed air. They are preferred in industries such as food and beverage, pharmaceuticals, and electronics, where oil-free air is critical.

Overall, using a screw compressor offers advantages such as high efficiency, continuous operation, compact design, low vibration and noise levels, capacity flexibility, and options for oil-injected or oil-free operation. These benefits make screw compressors a popular choice in various industries for a wide range of applications.

China Hot selling Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Direct Driven Double Screw Air Compressor with Affordable Price   with Best SalesChina Hot selling Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Direct Driven Double Screw Air Compressor with Affordable Price   with Best Sales
editor by CX 2024-03-27

China wholesaler Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Direct Driven Double Screw Air Compressor with Affordable Price air compressor price

Product Description

Industrial AC Power Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Direct Coupled Screw Air Compressor Advantage 

1. DENAIR PMSM(Permanent Magnet Synchronous Motor) VSD air compressor reduces the energy consumption by a staggering 50% on average.
 
2.Best-in-class screw element with longer male rotor, high volumetric efficiency
 
3.Permanent magnetic electric motor, no bearing, no lubricant and no maintenance, 100% transmission
 
4.Intelligent touch screen control panel, checking air compressor status more conveniently, monitor total power consumption, setting start and stop time of air compressor 
 
5.Unique design for inverter, perfect protection from short phase, phase short circuit, ground short circuit, over current, overvoltage, under voltage, overload, overheating, motor thermal protections etc.

Technical Parameters Of Variable Frequency Air Compressor with PMSM Motor

Model Maximum working pressure Capacity(FAD) Installed
motor power
IP Grade Noise level Dimensions
(mm)
Weight Air outlet
pipe diameter
Starting
Method
EEI
bar(g) psig m3/min cfm kw hp L*W*H kg
DAV-5 7.5  109 0.45-0.89 15.80-31.59 5.5 7.5 IP65 75 900*660*960 315 G3/4″ Direct Driven
Air
Cooling
EEI1
8.5  123 0.44-0.88 15.61-31.22
10.5  152 0.38-0.76 13.38-26.76
DAV-7 7.5  109 0.59-1.19 21.00-42.00 7.5 10 IP65 75 900*660*960 315 G3/4″
8.5  123 0.58-1.17 20.63-41.26
10.5  152 0.51-1.01 17.84-35.68
DAV-11 7.5  109 0.90-1.80 31.78-63.56 11 15 IP65 75 900*660*960 324 G3/4″
8.5  123 0.89-1.79 31.59-63.19
10.5  152 0.81-1.61 28.43-56.87
13.0  189 0.68-1.37 24.16-48.32
DAV-15 7.5  109 1.22-2.43 42.93-85.86 15 20 IP65 75 1465*990*1345 453 G1-1/4″
8.5  123 1.18-2.37 41.81-83.63
10.5  152 1.05-2.09 36.98-73.97
13.0  189 0.96-1.92 33.82-67.65
DAV-18 7.5  109 1.55-3.09 54.64-109.28 18.5 25 IP65 75 1465*990*1345 453 G1-1/4″
8.5  123 1.51-3.01 53.15-106.30
10.5  152 1.34-2.68 47.39-94.78
13.0  189 1.08-2.16 38.10-76.20
DAV-22 7.5  109 1.82-3.64 64.30-128.60 22 30 IP65 75 1465*990*1345 477 G1-1/4″
8.5  123 1.81-3.62 63.93-127.86
10.5  152 1.67-3.35 59.10-118.20
13.0  189 1.32-2.63 46.46-92.92
DAV-30 7.5  109 2.63-5.26 92.92-185.84 30 40 IP65 78 1600*1250*1550 682 G1-1/2″
8.5  123 2.62-5.24 92.55-185.10
10.5  152 2.36-4.72 83.26-166.51
13.0  189 2.09-4.18 73.78-147.56
DAV-37 7.5  109 3.44-6.87 121.35-242.71 37 50 IP65 78 1600*1250*1550 728 G1-1/2″
8.5  123 3.43-6.85 120.98-241.97
10.5  152 2.95-5.89 104.07-208.14
13.0  189 2.40-4.80 84.74-169.49
DAV-45 7.5  109 4.01-8.01 141.43-282.85 45 60 IP65 78 1600*1250*1550 728 G1-1/2″
8.5  123 3.99-7.98 140.87-281.74
10.5  152 3.63-7.25 128.05-256.09
13.0  189 3.15-6.29 111.13-222.27
DAV-55 7.5  109 5.14-10.28 181.57-363.14 55 75 IP54 80 1800*1200*1400 1310 G2″
8.5  123 5.10-10.20 180.08-360.16
10.5  152 4.83-9.66 170.60-341.21
13.0  189 3.94-7.87 139.01-278.02
DAV-75 7.5  109 6.48-12.97 228.96-457.91 75 100 IP54 80 1800*1200*1400 1325 G2
8.5  123 6.44-12.87 227.28-454.57
10.5  152 5.71-11.42 201.64-403.28
13.0  189 4.68-9.37 165.40-330.80
*) FAD in accordance with ISO 1217:2009, Annex C: Ansolute intake pressure 1 bar (a), cooling and air intake temperature 20ºC
**) Nosie level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance:±3 dB(A)
Specifications are subject to change without prior notice

We carefully selected for you the classic case


14 sets of VSD air compressor for 40HQ are ready for packing and delivering to CHINAMFG distributor in Buenos Aires, Argentina. The compressors are high-end customized for Argentina market with Germany MANN filters, France SCHNEIDER inverter, Belgium CMC controller, etc. 

DENAIR Factory

DENAIR Customers

DENAIR Exhibition

DENAIR Certificae

DENAIR Packing

FAQ

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2:   No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the Air Compressors? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Lubricated or Oil-Less
Cooling System: Air Cooling/Water Cooling
Power Source: AC Power
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

What Safety Precautions Should Be Taken When Operating Screw Compressors?

When operating screw compressors, it is important to follow specific safety precautions to ensure the well-being of personnel and prevent potential accidents. Here’s a detailed explanation:

1. Familiarize Yourself with the Equipment:

  • Before operating a screw compressor, thoroughly read and understand the manufacturer’s instructions, safety guidelines, and operating procedures. Familiarize yourself with the specific features, controls, and safety devices of the compressor.

2. Wear Appropriate Personal Protective Equipment (PPE):

  • Wear the necessary PPE, such as safety glasses, hearing protection, gloves, and appropriate clothing, when operating the compressor. PPE helps protect against potential hazards, including flying debris, noise, and contact with hot or moving parts.

3. Ensure Proper Ventilation:

  • Operate the screw compressor in a well-ventilated area to prevent the buildup of potentially harmful gases or fumes. Ensure that the compressor’s intake and exhaust vents are not obstructed, allowing for adequate airflow.

4. Compressor Location:

  • Position the compressor on a stable and level surface to prevent tipping or instability during operation. Ensure that the compressor is located away from flammable materials, heat sources, or sources of ignition.

5. Electrical Safety:

  • Follow electrical safety guidelines and ensure that the compressor is properly grounded. Avoid using damaged or frayed electrical cords and ensure that the electrical connections are secure.

6. Lockout/Tagout Procedures:

  • Before performing any maintenance or repair tasks on the compressor, follow lockout/tagout procedures to isolate electrical power and prevent accidental startup. Lockout/tagout procedures help protect against unexpected energization of the compressor or its components.

7. Pressure Relief:

  • Before performing any maintenance tasks or opening the compressor, ensure that all pressure has been relieved from the system. Follow proper procedures for depressurizing the compressor and associated piping to avoid sudden releases of pressure.

8. Hot Surfaces:

  • Be cautious of hot surfaces, such as compressor casings, piping, or discharge components. Allow sufficient cooling time before touching or performing maintenance tasks on hot surfaces to avoid burns.

9. Maintenance and Inspection:

  • Adhere to the manufacturer’s recommended maintenance schedule and perform regular inspections of the compressor. Replace any worn or damaged components promptly to prevent potential hazards or malfunctions.

10. Emergency Procedures:

  • Be familiar with emergency procedures, including how to shut down the compressor in case of an emergency, how to respond to leaks or spills, and how to handle fire or electrical incidents. Have emergency contact information readily available.

11. Training and Qualified Personnel:

  • Ensure that operators and maintenance personnel are adequately trained in the safe operation and maintenance of screw compressors. Only allow qualified personnel to perform maintenance or repair tasks.

It is essential to consult the specific safety guidelines provided by the manufacturer of the screw compressor as they may include additional precautions or recommendations.

In summary, when operating screw compressors, it is important to familiarize yourself with the equipment, wear appropriate PPE, ensure proper ventilation, follow electrical safety measures, implement lockout/tagout procedures, be cautious of hot surfaces, perform regular maintenance and inspections, and be prepared with emergency procedures. By following these safety precautions, the risk of accidents or injuries can be minimized, ensuring a safe working environment when operating screw compressors.

air compressor

How Do You Troubleshoot Common Issues with Screw Compressors?

Troubleshooting common issues with screw compressors involves a systematic approach to identify and resolve problems that may arise during operation. Here’s a detailed explanation:

1. Gather Information:

  • Start by gathering information about the symptoms and any recent changes or events related to the compressor. This can help pinpoint potential causes and guide the troubleshooting process.

2. Check Power and Controls:

  • Ensure that the compressor has a power supply and that all electrical connections are secure. Check for any tripped breakers or blown fuses. Verify that the compressor’s controls, such as pressure switches, temperature sensors, and safety devices, are functioning correctly.

3. Inspect for Leaks:

  • Check for any visible leaks in the compressed air system, including connections, fittings, hoses, and seals. Leaks can cause a drop in system pressure and affect the compressor’s performance. Repair or replace any damaged components.

4. Monitor Pressure and Temperature:

  • Monitor the discharge pressure and temperature of the compressor. Abnormal readings can indicate issues such as inadequate lubrication, high discharge temperatures, or problems with the cooling system. Refer to the manufacturer’s specifications for acceptable pressure and temperature ranges.

5. Verify Lubrication:

  • Ensure that the compressor’s lubrication system is functioning correctly. Check oil levels and the condition of the lubricant. Inadequate lubrication can lead to increased friction, overheating, and damage to internal components. Follow the manufacturer’s recommendations for lubricant type and change intervals.

6. Check Air Filters and Cooling System:

  • Inspect and clean or replace the air filters to ensure proper airflow. Clogged filters can reduce efficiency and increase the compressor’s operating temperature. Additionally, check the cooling system, including fans and heat exchangers, to ensure they are clean and functioning correctly.

7. Examine Vibration and Noise:

  • Pay attention to any unusual vibration or noise coming from the compressor. Excessive vibration may indicate misalignment, worn bearings, or loose components. Unusual noise can be a sign of mechanical issues or problems with the intake or discharge system.

8. Review Maintenance Records:

  • Review the compressor’s maintenance records to ensure that regular maintenance tasks, such as oil changes, filter replacements, and inspections, have been performed according to the manufacturer’s recommendations. Address any overdue or missed maintenance tasks.

9. Consult Manufacturer Documentation:

  • Refer to the compressor’s operating manual and troubleshooting guide provided by the manufacturer. These documents often contain specific troubleshooting steps for common issues and can provide valuable insights.

10. Seek Professional Assistance:

  • If the troubleshooting steps do not resolve the issue or if you are unsure about performing further diagnostics, it is recommended to seek assistance from a qualified technician or contact the compressor manufacturer’s technical support.

Remember to prioritize safety throughout the troubleshooting process, following appropriate lockout/tagout procedures and wearing the necessary personal protective equipment.

In summary, troubleshooting common issues with screw compressors involves checking power and controls, inspecting for leaks, monitoring pressure and temperature, verifying lubrication, checking air filters and cooling systems, examining vibration and noise, reviewing maintenance records, consulting manufacturer documentation, and seeking professional assistance when needed. By following a systematic approach, it is possible to identify and resolve common problems with screw compressors, ensuring their proper operation and performance.

air compressor

What Are the Advantages of Using a Screw Compressor?

Using a screw compressor offers several advantages in various applications. Here’s a detailed explanation:

High Efficiency:

Screw compressors are known for their high efficiency in converting electrical power into compressed air or gas. The rotary positive displacement design of screw compressors allows them to deliver a large volume of compressed air or gas with minimal energy loss. This high efficiency results in cost savings and reduced energy consumption compared to other types of compressors.

Continuous Operation:

One of the key advantages of screw compressors is their ability to provide a continuous flow of compressed air or gas. The interlocking helical rotors ensure a smooth and continuous compression process without pulsations. This feature is particularly beneficial in applications that require a steady and reliable source of compressed air, such as in manufacturing plants and industrial processes.

Compact Design:

Screw compressors are known for their compact design, which allows for space-saving installation. They have a relatively small footprint compared to other types of compressors, making them suitable for applications where space is limited. The compact design also facilitates ease of installation and integration into existing systems.

Low Vibration and Noise Levels:

Screw compressors are designed to operate with low vibration levels, resulting in smooth and quiet operation. The interlocking rotors and balanced design help in minimizing vibrations, reducing the need for additional vibration isolation measures. The low noise levels make screw compressors suitable for applications where noise reduction is important, such as in office environments or noise-sensitive industrial settings.

Wide Range of Capacities:

Screw compressors are available in a wide range of capacities, allowing for flexibility in meeting different compressed air or gas requirements. Whether it’s a small-scale application or a large industrial process, there are screw compressors available to match the specific capacity needs. This versatility makes screw compressors suitable for a variety of industries and applications.

Oil-Injected and Oil-Free Options:

Screw compressors are offered in both oil-injected and oil-free variants, providing options to meet different application requirements. Oil-injected screw compressors use lubricating oil for cooling, sealing, and reducing friction between the rotors. They are commonly used in industrial applications where a small amount of oil in the compressed air is acceptable. Oil-free screw compressors, on the other hand, eliminate the need for oil and provide contaminant-free compressed air. They are preferred in industries such as food and beverage, pharmaceuticals, and electronics, where oil-free air is critical.

Overall, using a screw compressor offers advantages such as high efficiency, continuous operation, compact design, low vibration and noise levels, capacity flexibility, and options for oil-injected or oil-free operation. These benefits make screw compressors a popular choice in various industries for a wide range of applications.

China wholesaler Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Direct Driven Double Screw Air Compressor with Affordable Price   air compressor priceChina wholesaler Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Direct Driven Double Screw Air Compressor with Affordable Price   air compressor price
editor by CX 2024-03-27

China wholesaler 75kw High Efficiency Energy Oil-Free Water Lubrication Rotary Direct Driven Screw Air Compressor air compressor for car

Product Description

Product Description

Product Introduction

    The Airend of Kingair water lubricated Oil-free CHINAMFG adopts PEEK door rotor, aerospace grade stainless steel rotor and a new production process. Using nano-scale water filter core and Inlet reverse osmosis system, it can provide a stable and qualified lubricating water treatment system for the compressor. The oil-free machine system can change water without stopping according to the set water change cycle, reducing daily maintenance costs and making use more worry-free. The system is simple, reduces parts and failure points, and improves reliability. Low energy consumption, isothermal compression, higher volumetric efficiency, more than 15% energy saving than two-stage compression dry oil-free screw compressor.

Detailed Photos

Product Parameters

Model KAW-75A
Power(Kw) 75Kw
Pressure(Bar) 8Bar
Volume flow(m3/min) 13m3/min
Air Outlet 1 1/2”
Weight(kg) 1630Kg
Dimension(mm) 1800×1300×1750mm

 

 

 

Certifications

 

 

 

Packaging & Shipping

 

 

 

Installation Instructions

 

 

Company Profile

 

 

    ZheJiang Kingair Industrial Co., Ltd., is the core technology solution provider for compressed gas system solutions, with mature operation experience and excellent brand reputation in the 3 major areas : product system, core technology and solutions.
   
    The company has strong comprehensive strength, the factory is located in Xihu (West Lake) Dis., ZheJiang , covers an area of 30000 square meters, has a strong equipment production capacity. In the course of 20 years of operation and development, we have always adhered to the enterprise spirit of
“professionalism, innovation, energy saving and service”, deeply implemented the strategic policy of environmental protection and low carbon, and realized the construction of high intelligent and efficient air pressure system industry chain.
   
    Kingair focuses on R&D, production and trade, and produces air compressor products with stable overall performance, advanced control system, superior, gas environment, reasonable design, higher efficiency and longer service life.
   
    Each product of the company has passed the IS09000 quality management system certification, European CE, ISO certification, etc., and has established a complete set of mature foreign trade operation system. The products are popular in more than 80 countries and regions in Asia, Europe,Africa and America.

 

FAQ

 

 

Q1. Is KINGAIR trading company or manufacturer ?
A: We are professional manufacturer of screw air compressor, more than 20 years experience.

Q2. How long is KINGAIR delivery time ?
A: KINGAIR standard delivery time is 15 working days after confirmed order.For the other non-standard requirements will be discussed case by case.

Q3. How about your after-sales service?
A: 1. Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3. CHINAMFG agents and after service available arrange our engineers to help you training and installation.

Q4. What is the available voltage KINGAIR compressor?
A:KINGAIR available voltage include 380v/50hz/3p,400v/50hz/3p,415v/50hz/3p,220v/60hz/3p,440v/60hz/3p,And
KIGNAIR also supplies the required voltage.

Q5. Do you have any certificate ?
A: Yes, according to customer’s market need, we can offer CE certificate, ISO certificate, etc.

Q6. Do you offer OEM service ?
A: Yes, both OEM & ODM service can be accepted.

Q7. Can KINGAIR machines be run in high temperature environment?What is working temperature range?
A: Yes, KINGAIR machines would run in high temperature environment countries.Such as India, UAE,South Africa, Saudi Arabia, Iraq, Pakistan,etc.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: on Line Technical Support
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Water Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Samples:
US$ 25400/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What Safety Precautions Should Be Taken When Operating Screw Compressors?

When operating screw compressors, it is important to follow specific safety precautions to ensure the well-being of personnel and prevent potential accidents. Here’s a detailed explanation:

1. Familiarize Yourself with the Equipment:

  • Before operating a screw compressor, thoroughly read and understand the manufacturer’s instructions, safety guidelines, and operating procedures. Familiarize yourself with the specific features, controls, and safety devices of the compressor.

2. Wear Appropriate Personal Protective Equipment (PPE):

  • Wear the necessary PPE, such as safety glasses, hearing protection, gloves, and appropriate clothing, when operating the compressor. PPE helps protect against potential hazards, including flying debris, noise, and contact with hot or moving parts.

3. Ensure Proper Ventilation:

  • Operate the screw compressor in a well-ventilated area to prevent the buildup of potentially harmful gases or fumes. Ensure that the compressor’s intake and exhaust vents are not obstructed, allowing for adequate airflow.

4. Compressor Location:

  • Position the compressor on a stable and level surface to prevent tipping or instability during operation. Ensure that the compressor is located away from flammable materials, heat sources, or sources of ignition.

5. Electrical Safety:

  • Follow electrical safety guidelines and ensure that the compressor is properly grounded. Avoid using damaged or frayed electrical cords and ensure that the electrical connections are secure.

6. Lockout/Tagout Procedures:

  • Before performing any maintenance or repair tasks on the compressor, follow lockout/tagout procedures to isolate electrical power and prevent accidental startup. Lockout/tagout procedures help protect against unexpected energization of the compressor or its components.

7. Pressure Relief:

  • Before performing any maintenance tasks or opening the compressor, ensure that all pressure has been relieved from the system. Follow proper procedures for depressurizing the compressor and associated piping to avoid sudden releases of pressure.

8. Hot Surfaces:

  • Be cautious of hot surfaces, such as compressor casings, piping, or discharge components. Allow sufficient cooling time before touching or performing maintenance tasks on hot surfaces to avoid burns.

9. Maintenance and Inspection:

  • Adhere to the manufacturer’s recommended maintenance schedule and perform regular inspections of the compressor. Replace any worn or damaged components promptly to prevent potential hazards or malfunctions.

10. Emergency Procedures:

  • Be familiar with emergency procedures, including how to shut down the compressor in case of an emergency, how to respond to leaks or spills, and how to handle fire or electrical incidents. Have emergency contact information readily available.

11. Training and Qualified Personnel:

  • Ensure that operators and maintenance personnel are adequately trained in the safe operation and maintenance of screw compressors. Only allow qualified personnel to perform maintenance or repair tasks.

It is essential to consult the specific safety guidelines provided by the manufacturer of the screw compressor as they may include additional precautions or recommendations.

In summary, when operating screw compressors, it is important to familiarize yourself with the equipment, wear appropriate PPE, ensure proper ventilation, follow electrical safety measures, implement lockout/tagout procedures, be cautious of hot surfaces, perform regular maintenance and inspections, and be prepared with emergency procedures. By following these safety precautions, the risk of accidents or injuries can be minimized, ensuring a safe working environment when operating screw compressors.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

Can Screw Compressors Handle High-Pressure Applications?

Yes, screw compressors are capable of handling high-pressure applications. Here’s a detailed explanation:

Screw compressors are known for their ability to deliver high-pressure compressed air or gas. The design of screw compressors allows them to achieve higher pressure ratios compared to other types of compressors, such as reciprocating piston compressors.

The compression process in screw compressors is continuous and smooth, which enables them to handle high-pressure requirements efficiently. The intermeshing rotors create compression chambers that gradually reduce in volume, resulting in the compression of air or gas. By adjusting the rotational speed of the rotors and optimizing the design parameters, screw compressors can generate the desired high discharge pressures.

However, it’s important to note that the maximum pressure capability of a screw compressor may vary depending on factors such as:

  • 1. Compressor Design: The design features of the screw compressor, including the rotor profile, sealing mechanism, and cooling system, can influence its maximum pressure capacity.
  • 2. Rotor Size and Speed: The size and rotational speed of the rotors impact the compression ratio and, consequently, the achievable discharge pressure. Larger rotors and higher rotational speeds generally allow for higher pressure ratios.
  • 3. Drive Power: The power of the drive motor connected to the screw compressor affects its ability to handle high-pressure applications. Adequate power is necessary to overcome the resistance and maintain the desired compression ratio.
  • 4. Structural Integrity: The structural integrity and material strength of the compressor housing, rotors, and other components determine the maximum pressure that the compressor can withstand without failure or leakage.

It’s important to select a screw compressor with the appropriate specifications and consult the manufacturer’s guidelines to ensure that it can handle the specific high-pressure requirements of the application.

Additionally, it’s worth noting that high-pressure applications may also require additional equipment, such as pressure vessels or downstream pressure regulators, to safely handle and control the compressed air or gas at the desired pressure levels.

China wholesaler 75kw High Efficiency Energy Oil-Free Water Lubrication Rotary Direct Driven Screw Air Compressor   air compressor for carChina wholesaler 75kw High Efficiency Energy Oil-Free Water Lubrication Rotary Direct Driven Screw Air Compressor   air compressor for car
editor by CX 2024-03-26