Tag Archives: speed air compressor

China Professional Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 M3/Min 5bar Two-Stage Rotary Screw Type Air Compressor air compressor CHINAMFG freight

Product Description

Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 m3/min 5bar Two-Stage Rotary Screw Type Air Compressor
 

Product Parameters

Technical Parameters Of fixed speed screw air compressor:

Model Power
(kw)
Air folw/pressure
(m3/Bar)
Outlet size Noise Unit weight
(KG)
Unit size
(mm)
WZS-22PMD-2S 22 6.25m³/5Bar RP1 1/2 66±3 1350 1800x1270x1550
WZS-30PMD-2S 30 7.2m³/5Bar RP1 1/2 66±3 1550 1800x1270x1550
WZS-37PMD-2S 37 10m³/5Bar RP1 1/2 68±3 1900 1800x1270x1550
WZS-45PMD-2S 45 12m³/5Bar RP2 68±3 2100 1800x1270x1550
WZS-55PMD-2S 55 13.8m³/5Bar RP2 70±3 2200 2100x1360x1660
WZS-75PMD-2S 75 18.5m³/5Bar DN65 70±3 2800 2800x1750x1900
WZS-90PMD-2S 90 23m³/5Bar DN65 72±3 2800 2800x1750x1900
WZS-110PMD-2S 110 28m³/5Bar DN80 72±3 3200 3200x1750x2250
WZS-132PMD-2S 132 32.5m³/5Bar D270N80 72±3 3500 3200x1750x2250
WZS-160PMD-2S 160 41m³/5Bar DN125 74±3 4100 3200x1750x2350
WZS-185PMD-2S 185 45m³/5Bar DN125 74±3 4500 3800x2150x2250
WZS-200PMD-2S 200 50m³/5Bar DN150 76±3 5100 3800x2150x2250
WZS-220PMD-2S 220 54m³/5Bar DN150 76±3 6200 3800x2250x2250
WZS-250PMD-2S 250 61m³/5Bar DN150 78±3 6600 4200x2250x2400

 

 

Company Profile

 

 

Certifications

 


 

Exhibition

 


Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)

2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).
 
High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won’t lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault. 
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.

SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.

 

FAQ

 

Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.

Q:  Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity

Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.

Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspect completely goods before shipping.

Q:  If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.

Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Video Technical Support
Warranty: Unit 1 Year, Air End 2 Years
Lubrication Style: Oil-less
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

Can Screw Compressors Be Used for Medical Air Supply?

Yes, screw compressors can be used for medical air supply. Here’s a detailed explanation:

Screw compressors are commonly employed in various applications, including medical air supply systems. Medical air is a critical utility in healthcare facilities, used for various purposes such as respiratory therapy, anesthesia, and surgical tools. Here are some key points to consider:

1. Reliability and Efficiency:

Screw compressors are known for their reliability and efficiency. They can provide a continuous and reliable source of compressed air, ensuring a stable supply for medical applications. The rotary screw design allows for smooth and efficient compression, minimizing energy consumption and maximizing system performance.

2. Oil-Free Operation:

In medical applications, it is crucial to ensure the purity of the compressed air. Screw compressors can be designed and certified to provide oil-free air, eliminating the risk of oil contamination in the medical air supply. Oil-free screw compressors incorporate specialized sealing systems and filtration to prevent oil carryover, making them suitable for medical air applications.

3. Air Quality Standards:

Medical air must meet specific air quality standards to ensure patient safety and treatment effectiveness. Standards such as the European Pharmacopoeia (Ph. Eur.) or the United States Pharmacopeia (USP) define the required purity levels for medical air, including limits on particulate matter, moisture content, and microbial contamination. Screw compressors can be equipped with appropriate filtration and purification systems to meet these standards.

4. Integrated Drying and Filtration:

Some screw compressors designed for medical air applications incorporate integrated drying and filtration systems. These systems remove moisture and contaminants from the compressed air, ensuring it meets the required quality standards. Integrated drying systems can include refrigerated dryers, desiccant dryers, or membrane dryers, depending on the specific needs of the medical air supply system.

5. Redundancy and Backup Systems:

Medical air supply systems often require a high level of reliability and continuity. Screw compressors can be configured with redundancy and backup systems to ensure uninterrupted supply. Multiple compressors can be installed in parallel, with automatic switching mechanisms to maintain supply in case of a compressor failure or maintenance activities.

6. Monitoring and Alarms:

Modern screw compressors used in medical air supply systems often feature advanced monitoring capabilities. They can continuously monitor and record key parameters such as pressure, temperature, and system performance. Alarms and alerts can be configured to notify operators or maintenance personnel in case of abnormal conditions or potential issues with the compressor.

7. Compliance with Standards and Regulations:

When using screw compressors for medical air supply, it is essential to comply with relevant standards and regulations. These may include medical device regulations, electrical safety standards, and guidelines specific to medical gas systems. Compliance ensures that the medical air supply system meets the necessary safety and quality requirements.

In summary, screw compressors can be used for medical air supply, providing reliable and efficient compressed air for various medical applications. With their reliability, oil-free operation, adherence to air quality standards, integrated drying and filtration capabilities, and the ability to incorporate redundancy and monitoring features, screw compressors are well-suited for medical air supply systems in healthcare facilities.

air compressor

Can Screw Compressors Be Used in Industrial Applications?

Yes, screw compressors are widely used in industrial applications and are well-suited for various industrial processes. Here’s a detailed explanation:

1. Manufacturing and Assembly:

Screw compressors find extensive use in manufacturing and assembly processes. They provide a reliable source of compressed air for powering pneumatic tools, such as drills, impact wrenches, and spray guns. Compressed air is also used for operating pneumatic cylinders and valves, facilitating automation and control in industrial production lines.

2. Industrial Automation:

In industrial automation systems, screw compressors play a crucial role in providing compressed air for actuating control valves, operating robotic arms, and powering pneumatic actuators. The continuous and reliable supply of compressed air from screw compressors ensures the smooth operation of automated machinery and equipment.

3. HVAC Systems:

Screw compressors are commonly used in large-scale heating, ventilation, and air conditioning (HVAC) systems. They are employed in chillers, which cool water or air for air conditioning and refrigeration purposes. Screw compressors in HVAC systems offer high energy efficiency, making them cost-effective and environmentally friendly options for large commercial and industrial buildings.

4. Food and Beverage Industry:

The food and beverage industry relies on screw compressors for various applications. They are used for providing compressed air in food processing and packaging operations, such as pneumatic conveying, filling, labeling, and sealing. Screw compressors used in this industry are often of the oil-free type to ensure air purity and prevent contamination of food products.

5. Pharmaceuticals and Healthcare:

In the pharmaceutical and healthcare sectors, screw compressors are vital for critical applications. They provide clean and oil-free compressed air required for pharmaceutical manufacturing processes, including tablet coating, fermentation, lyophilization, and cleanroom operations. Screw compressors with strict air quality standards, such as oil-free and contaminant-free options, are commonly used in these industries.

6. Energy and Power Generation:

Screw compressors play a significant role in energy and power generation facilities. They are used for processes such as gas compression, pneumatic conveying of coal and biomass, and control air supply in power plants. Screw compressors in these applications are designed to handle high pressures and large volumes of gas.

7. Mining and Construction:

In mining and construction industries, screw compressors are employed for various tasks. They power pneumatic tools and equipment used in drilling, rock blasting, material handling, and construction activities. Screw compressors are valued for their reliability, continuous operation, and ability to withstand harsh operating conditions.

8. Oil and Gas Industry:

The oil and gas industry extensively uses screw compressors for gas compression and processing. Screw compressors are employed in natural gas pipelines, gas processing plants, and refineries. They handle the compression of gases, such as natural gas, hydrogen, and process gases, ensuring efficient transportation and refining operations.

These are just a few examples of the industrial applications where screw compressors are commonly used. Their high efficiency, continuous operation, compact design, and capacity flexibility make them well-suited for a wide range of industrial processes and systems.

China Professional Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 M3/Min 5bar Two-Stage Rotary Screw Type Air Compressor   air compressor CHINAMFG freightChina Professional Top Performance Stationary Low Noise Permanent Magnet Synchronous Variable Speed Driven VSD VFD 6~61 M3/Min 5bar Two-Stage Rotary Screw Type Air Compressor   air compressor CHINAMFG freight
editor by CX 2024-04-10

China supplier Industrial Inverter Compressors Variable Frequency Speed Direct Driven Screw Air Compressor air compressor portable

Product Description

Industrial Inverter Compressors Variable Frequency Speed Direct Driven Screw Air Compressor 

Industrial air compressor small size, reasonable layout, convenient maintenance and use, suitable for direct use on the production site, and small floor area.

Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency. 1.New design, new structure, stable quality,it has good heat dissipation .
2.Comprehensive upgrade of the manufacturing process, high-cost performance,good noise reduction and mute effect and long life.
3.Permanent magnet variable frequency motor, which is highly efficient and energy-saving.

Product Description

Model Air pressure Mpa F.A.D m³/min Rated power KW Noise                           dB Drive method Start method Outlet valve
SR-VF7.5 0.8 1.1 7.5 ≤76 Direct Frequency conversion start R1/2
1 1
13 0.8
1.6 0.5
SR-VF11 0.8 18 11 R3/4
1 1.6
1 1.3
1.6 0.7
SR-VF15 0.8 2.3 15
1 2.1
1 1.7
1.6 1.2
SR-VF22 0.8 3.6 22 ≤80 R1
1 3.2
1 2.3
1.6 2.0
SR-VF30 0.8 5.0 30 R1 1/2
1 3.5
1 3.3
1.6 2.6
SR-VF37 0.8 6.1 37
1 4.8
1.3 4.5
1.6 3.1
SR-VF45 0.8 7.5 45 ≤85
1 6.2
1 6.0
1.6 4.5
SR-VF55 0.8 9.25 55 R2
1 7.3
1 7
1.6 5.4
SR-VF75 0.8 12 75
1 9.2
1 8.9
1.6 6.8
SR-VF90 0.8 16 90 ≤95
1 12.5
1 12
1.6 8.6
SR-VF110 0.8 20 110 R2 1/2
1 18.5
1.3 15.8
16 11.5
SR-VF132 0.8 23 132
1 21.5
13 15
1.6 14
SR-VF160 0.8 28 160 ≤90 DN65
1 22
13 21
1.6 19
SR-VF185 0.8 30 185
1 27
13 22
1.6 21
SR-VF200 0.8 32 200 ≤95 DN80
1 29
13 27
1.6 21
SR-VF220 0.8 38 220
1 30
13 29
16 21
SR-VF250 0.8 43 250
1 39.5
1.3 31
16 28

Adopt a built-in oil separation setting to ensure the oil and gas separation effect and reduce fuel consumption
1.High filtration level and low flow resistance.
2.Good noise reduction and mute effect.
3.Oil and gas separation, high-temperature resistance, high-pressure resistance – reduce the oil content of the exhaust.
4.Clean exhaust to ensure clean gas.
Timely Smart Control Panel
1.Using a user-friendly interface to prompt operation, clear at a glance, real-time monitoring of information.

Company Profile

1.What can you buy from us?
DTH drilling rig,core drilling rig,highway pile driver,solar pile driver ,anchor pile driver,rotary drill rig ,Top Hammer drill rig,underground jumbo drill rig ,DTH hammer,drill rod,screw air compressor,water well drilling rig,truck mounted water well drilling rig,screw air compressor,piston air compressor,pneumatic rock drill ,drill bit,tricone bit ,spare parts.
 

2.How can I make payment?  
A:You can pay by credit card, TT, Western Union, LC etc.  

3.How is the shipment?   How long dose it take?  
A: For large quantity or heavy products, we ship by sea shipping or land shipping.   Shipping efficiency depends on country and city you want to ship to.   For small and delicate products, we ship by DHL, UPS, Fedex or TNT.  You can also appoint shipping method you like before we ship.    

4.How is your quality control?
A: We have our own experienced QC.  There will be strict inspection and testing for every order before shipping out.

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Technical Services
Warranty: 1 Year
Lubrication Style: Lubricated

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

What Safety Precautions Should Be Taken When Operating Screw Compressors?

When operating screw compressors, it is important to follow specific safety precautions to ensure the well-being of personnel and prevent potential accidents. Here’s a detailed explanation:

1. Familiarize Yourself with the Equipment:

  • Before operating a screw compressor, thoroughly read and understand the manufacturer’s instructions, safety guidelines, and operating procedures. Familiarize yourself with the specific features, controls, and safety devices of the compressor.

2. Wear Appropriate Personal Protective Equipment (PPE):

  • Wear the necessary PPE, such as safety glasses, hearing protection, gloves, and appropriate clothing, when operating the compressor. PPE helps protect against potential hazards, including flying debris, noise, and contact with hot or moving parts.

3. Ensure Proper Ventilation:

  • Operate the screw compressor in a well-ventilated area to prevent the buildup of potentially harmful gases or fumes. Ensure that the compressor’s intake and exhaust vents are not obstructed, allowing for adequate airflow.

4. Compressor Location:

  • Position the compressor on a stable and level surface to prevent tipping or instability during operation. Ensure that the compressor is located away from flammable materials, heat sources, or sources of ignition.

5. Electrical Safety:

  • Follow electrical safety guidelines and ensure that the compressor is properly grounded. Avoid using damaged or frayed electrical cords and ensure that the electrical connections are secure.

6. Lockout/Tagout Procedures:

  • Before performing any maintenance or repair tasks on the compressor, follow lockout/tagout procedures to isolate electrical power and prevent accidental startup. Lockout/tagout procedures help protect against unexpected energization of the compressor or its components.

7. Pressure Relief:

  • Before performing any maintenance tasks or opening the compressor, ensure that all pressure has been relieved from the system. Follow proper procedures for depressurizing the compressor and associated piping to avoid sudden releases of pressure.

8. Hot Surfaces:

  • Be cautious of hot surfaces, such as compressor casings, piping, or discharge components. Allow sufficient cooling time before touching or performing maintenance tasks on hot surfaces to avoid burns.

9. Maintenance and Inspection:

  • Adhere to the manufacturer’s recommended maintenance schedule and perform regular inspections of the compressor. Replace any worn or damaged components promptly to prevent potential hazards or malfunctions.

10. Emergency Procedures:

  • Be familiar with emergency procedures, including how to shut down the compressor in case of an emergency, how to respond to leaks or spills, and how to handle fire or electrical incidents. Have emergency contact information readily available.

11. Training and Qualified Personnel:

  • Ensure that operators and maintenance personnel are adequately trained in the safe operation and maintenance of screw compressors. Only allow qualified personnel to perform maintenance or repair tasks.

It is essential to consult the specific safety guidelines provided by the manufacturer of the screw compressor as they may include additional precautions or recommendations.

In summary, when operating screw compressors, it is important to familiarize yourself with the equipment, wear appropriate PPE, ensure proper ventilation, follow electrical safety measures, implement lockout/tagout procedures, be cautious of hot surfaces, perform regular maintenance and inspections, and be prepared with emergency procedures. By following these safety precautions, the risk of accidents or injuries can be minimized, ensuring a safe working environment when operating screw compressors.

air compressor

How Do You Maintain the Air Quality in a Screw Compressor System?

Maintaining air quality in a screw compressor system is crucial to ensure the performance, efficiency, and reliability of the compressed air. Here’s a detailed explanation:

1. Proper Intake Filtration:

Install high-quality intake filters to prevent contaminants, such as dust, dirt, and debris, from entering the screw compressor system. These filters should have an appropriate filtration rating to effectively capture particles of the desired size. Regularly inspect and clean or replace the intake filters to maintain their effectiveness.

2. Compressed Air Dryers:

Use compressed air dryers, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air. Moisture can lead to corrosion, damage to pneumatic equipment, and compromised air quality. The type of dryer selected depends on the specific application requirements and the desired level of moisture removal.

3. Oil Removal Filters:

In oil-injected screw compressors, oil is used for lubrication, which can contaminate the compressed air. Install oil removal filters downstream of the compressor to remove any oil carryover from the compressed air. These filters typically use coalescing technology to separate and trap oil particles, ensuring clean air quality.

4. Condensate Management:

Effectively manage condensate, which is formed when moisture in the compressed air condenses as it cools. Install condensate drains and separators to remove and properly dispose of condensate. Improper condensate management can lead to water contamination in the compressed air system.

5. Regular Maintenance:

Perform regular maintenance tasks as recommended by the manufacturer, including oil changes, filter replacements, and inspections. Proper maintenance helps ensure that the compressor system operates efficiently and minimizes the risk of contaminants entering the compressed air.

6. Air Receiver Tank Maintenance:

If the screw compressor system includes an air receiver tank, regularly inspect and clean the tank to remove any accumulated debris or contaminants. Additionally, ensure that the tank’s drain valve is functioning correctly to remove any water or condensate from the tank.

7. Leak Detection and Repair:

Regularly inspect the compressed air system for leaks. Leaks not only waste energy but also allow contaminants from the surrounding environment to enter the system. Use appropriate leak detection methods, such as ultrasonic detectors or soapy water solutions, to identify and promptly repair any leaks.

8. Monitor and Control Operating Conditions:

Monitor and maintain proper operating conditions within the screw compressor system. This includes monitoring discharge pressure, temperature, and other relevant parameters to ensure they are within acceptable ranges. Implement appropriate control strategies, such as regulating compressor capacity or adjusting dryer settings, to optimize air quality while meeting the specific application requirements.

9. Training and Awareness:

Provide training to operators and maintenance personnel on the importance of air quality in a screw compressor system. Ensure they understand proper maintenance procedures, the significance of filtration, and how to identify and address potential air quality issues.

10. Compliance with Regulations:

Be aware of and comply with relevant regulations and standards governing air quality in your specific industry or application. This may include adherence to guidelines such as ISO 8573, which specifies air purity classes for different contaminants in compressed air systems.

By following these practices, you can maintain the air quality in a screw compressor system, ensuring clean, reliable, and high-quality compressed air for various applications.

air compressor

Can Screw Compressors Be Used in Industrial Applications?

Yes, screw compressors are widely used in industrial applications and are well-suited for various industrial processes. Here’s a detailed explanation:

1. Manufacturing and Assembly:

Screw compressors find extensive use in manufacturing and assembly processes. They provide a reliable source of compressed air for powering pneumatic tools, such as drills, impact wrenches, and spray guns. Compressed air is also used for operating pneumatic cylinders and valves, facilitating automation and control in industrial production lines.

2. Industrial Automation:

In industrial automation systems, screw compressors play a crucial role in providing compressed air for actuating control valves, operating robotic arms, and powering pneumatic actuators. The continuous and reliable supply of compressed air from screw compressors ensures the smooth operation of automated machinery and equipment.

3. HVAC Systems:

Screw compressors are commonly used in large-scale heating, ventilation, and air conditioning (HVAC) systems. They are employed in chillers, which cool water or air for air conditioning and refrigeration purposes. Screw compressors in HVAC systems offer high energy efficiency, making them cost-effective and environmentally friendly options for large commercial and industrial buildings.

4. Food and Beverage Industry:

The food and beverage industry relies on screw compressors for various applications. They are used for providing compressed air in food processing and packaging operations, such as pneumatic conveying, filling, labeling, and sealing. Screw compressors used in this industry are often of the oil-free type to ensure air purity and prevent contamination of food products.

5. Pharmaceuticals and Healthcare:

In the pharmaceutical and healthcare sectors, screw compressors are vital for critical applications. They provide clean and oil-free compressed air required for pharmaceutical manufacturing processes, including tablet coating, fermentation, lyophilization, and cleanroom operations. Screw compressors with strict air quality standards, such as oil-free and contaminant-free options, are commonly used in these industries.

6. Energy and Power Generation:

Screw compressors play a significant role in energy and power generation facilities. They are used for processes such as gas compression, pneumatic conveying of coal and biomass, and control air supply in power plants. Screw compressors in these applications are designed to handle high pressures and large volumes of gas.

7. Mining and Construction:

In mining and construction industries, screw compressors are employed for various tasks. They power pneumatic tools and equipment used in drilling, rock blasting, material handling, and construction activities. Screw compressors are valued for their reliability, continuous operation, and ability to withstand harsh operating conditions.

8. Oil and Gas Industry:

The oil and gas industry extensively uses screw compressors for gas compression and processing. Screw compressors are employed in natural gas pipelines, gas processing plants, and refineries. They handle the compression of gases, such as natural gas, hydrogen, and process gases, ensuring efficient transportation and refining operations.

These are just a few examples of the industrial applications where screw compressors are commonly used. Their high efficiency, continuous operation, compact design, and capacity flexibility make them well-suited for a wide range of industrial processes and systems.

China supplier Industrial Inverter Compressors Variable Frequency Speed Direct Driven Screw Air Compressor   air compressor portableChina supplier Industrial Inverter Compressors Variable Frequency Speed Direct Driven Screw Air Compressor   air compressor portable
editor by CX 2024-03-07

China Custom Oil Free Variable Speed Drive 18kw 43.7-86.2cfm 7bar Compressor for CHINAMFG Zt 18VSD-10 Compressor VSD Series Screw Air Compressor air compressor portable

Product Description

We are authorized distributer of atlas copco, we could provide whole product line of
Atlas Copco air compressors , spare parts and consumables. we are also
certified supplier by international authoritative certification
organizations.

Kindly advise your technical requirements, we will recommend suitable
compressed air system and spare parts for you .

We can provide CHINAMFG One-Stop Service,and efficient energy – saving solutions for you .

 

Related compressor spare parts:
 

Air Compressor Daily Consumables Air/oil/pipeline Filter,Oil Separator,Lubricant.
Air Compressor Electrial Components Pressure/temprature sensor,Differential pressure Sensor,pressure/temp.switch.
Air Compressor Preventive Maintenance Kit Min.pressure Kit,Oil stop kit,Check Valve Kit,Unloading Valve kit,Safety valve kit and so on.
Air compressor Motor Main Motor,Fan Motor.
Air Compressor Spare parts hose,o-ring,oil level guage,shaft,gear wheel,display,diaphragm,coupling.
Air Compressor rotor for Atlas Copco,Ingersoll Rand,Sullair,CompAir,Fusheng,Quincy,Chicago Pneumatic.
Air Compressor Cooler After Cooler,Oil Cooler.

Products Description

Industrial equipment, printing service, pipelines,power plants, oil&gas, oil refinery, coating, painting,
plastics, steel industry, rubber, mechanical, blow molding, color sorter machine, shipyard, sandblasting, 
metallurg,etc.

Different industries correspond to different air compressors, kindly please send me your application
areas and specific conditions, then will recommend the most suitable products for you .

 Shipping
We can provide CHINAMFG standard packaging or OEM packaging.


1 Q: How about  the quality of products ?

    A: We are authorized distributer of Atlas Copco. Don’t worry the quality and service.

2 Q: How long is your  delivery lead time ?

    A: If there is stock, the lead time is about 3 working days after we get the payment, if need to
       be produced, it depends.

3 Q: How about your overseas after-sale service?

    A: (1)Provide customers with intallation and commissioning online instructions.

       (2)Worldwide agents and sfter service available.

4 Q: Can you accept OEM&ODM orders?

    A: Yes, we have professional design team, OEM&ODM orders are highly welcomed.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 1 Year
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Customization:
Available

|

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

Can Screw Compressors Be Used in Food Processing?

Yes, screw compressors can be used in food processing. Here’s a detailed explanation:

Screw compressors are widely employed in various industrial applications, including the food processing industry. They provide a reliable and efficient source of compressed air, which is used for a range of purposes in food processing facilities. Here are some key points to consider:

1. Packaging: Screw compressors are commonly used in food packaging processes. Compressed air is utilized for tasks such as operating pneumatic actuators, controlling packaging machinery, and inflating packaging materials, such as bags and containers.

2. Cleaning and Drying: Compressed air is essential for cleaning and drying applications in the food industry. Screw compressors supply the necessary air pressure for tasks such as blowing off debris, dust, or moisture from food products, packaging surfaces, and production equipment.

3. Pneumatic Conveying: Screw compressors play a crucial role in pneumatic conveying systems used for transporting food products, such as grains, powders, or granules. Compressed air is utilized to create the necessary airflow to move the food materials through pipes or tubes to different processing stages or storage areas.

4. Cooling and Freezing: In food processing, screw compressors are often employed in refrigeration and cooling systems. They provide compressed air for various cooling processes, such as air chilling, blast freezing, or cryogenic freezing, which help maintain the freshness and quality of perishable food products.

5. Air Control and Mixing: Compressed air is utilized for precise air control and mixing applications in food processing. It can be used to control the flow rate, pressure, and temperature of air in mixing processes, such as dough mixing or batter preparation.

6. Cleaning-In-Place (CIP) Systems: CIP systems are widely used in the food industry to clean and sanitize equipment and pipelines. Compressed air is often an integral part of these systems, assisting in the removal of residues and ensuring proper cleaning and hygiene practices.

When using screw compressors in food processing, it is important to consider specific requirements and regulations related to food safety and quality. Here are some key considerations:

a) Food-Grade Lubricants: Ensure that the screw compressor is compatible with food-grade lubricants. Lubricants used in the compressor should be safe for incidental contact with food products and compliant with applicable food safety regulations.

b) Air Purity: Depending on the application, the compressed air may need to meet specific air quality standards to prevent contamination of food products. Standards such as ISO 8573, which define air purity classes for different contaminants, can be referenced to determine the required level of air purity.

c) Maintenance and Cleaning: Implement proper maintenance and cleaning procedures for the screw compressor to prevent any potential contamination risks. Regular inspection, cleaning, and adherence to good manufacturing practices (GMP) are essential to ensure food safety and compliance.

d) Regulatory Compliance: Comply with relevant food safety regulations and guidelines, such as those established by the Food and Drug Administration (FDA) or local regulatory authorities. These regulations may cover various aspects, including equipment design, materials, cleanliness, and hygiene practices.

In summary, screw compressors can be used in food processing for tasks such as packaging, cleaning, pneumatic conveying, cooling, and mixing. However, it is important to consider food safety regulations, use food-grade lubricants, maintain air quality, and follow proper maintenance and cleaning procedures to ensure compliance and protect the integrity of food products.

air compressor

Can Screw Compressors Be Used in Industrial Applications?

Yes, screw compressors are widely used in industrial applications and are well-suited for various industrial processes. Here’s a detailed explanation:

1. Manufacturing and Assembly:

Screw compressors find extensive use in manufacturing and assembly processes. They provide a reliable source of compressed air for powering pneumatic tools, such as drills, impact wrenches, and spray guns. Compressed air is also used for operating pneumatic cylinders and valves, facilitating automation and control in industrial production lines.

2. Industrial Automation:

In industrial automation systems, screw compressors play a crucial role in providing compressed air for actuating control valves, operating robotic arms, and powering pneumatic actuators. The continuous and reliable supply of compressed air from screw compressors ensures the smooth operation of automated machinery and equipment.

3. HVAC Systems:

Screw compressors are commonly used in large-scale heating, ventilation, and air conditioning (HVAC) systems. They are employed in chillers, which cool water or air for air conditioning and refrigeration purposes. Screw compressors in HVAC systems offer high energy efficiency, making them cost-effective and environmentally friendly options for large commercial and industrial buildings.

4. Food and Beverage Industry:

The food and beverage industry relies on screw compressors for various applications. They are used for providing compressed air in food processing and packaging operations, such as pneumatic conveying, filling, labeling, and sealing. Screw compressors used in this industry are often of the oil-free type to ensure air purity and prevent contamination of food products.

5. Pharmaceuticals and Healthcare:

In the pharmaceutical and healthcare sectors, screw compressors are vital for critical applications. They provide clean and oil-free compressed air required for pharmaceutical manufacturing processes, including tablet coating, fermentation, lyophilization, and cleanroom operations. Screw compressors with strict air quality standards, such as oil-free and contaminant-free options, are commonly used in these industries.

6. Energy and Power Generation:

Screw compressors play a significant role in energy and power generation facilities. They are used for processes such as gas compression, pneumatic conveying of coal and biomass, and control air supply in power plants. Screw compressors in these applications are designed to handle high pressures and large volumes of gas.

7. Mining and Construction:

In mining and construction industries, screw compressors are employed for various tasks. They power pneumatic tools and equipment used in drilling, rock blasting, material handling, and construction activities. Screw compressors are valued for their reliability, continuous operation, and ability to withstand harsh operating conditions.

8. Oil and Gas Industry:

The oil and gas industry extensively uses screw compressors for gas compression and processing. Screw compressors are employed in natural gas pipelines, gas processing plants, and refineries. They handle the compression of gases, such as natural gas, hydrogen, and process gases, ensuring efficient transportation and refining operations.

These are just a few examples of the industrial applications where screw compressors are commonly used. Their high efficiency, continuous operation, compact design, and capacity flexibility make them well-suited for a wide range of industrial processes and systems.

China Custom Oil Free Variable Speed Drive 18kw 43.7-86.2cfm 7bar Compressor for CHINAMFG Zt 18VSD-10 Compressor VSD Series Screw Air Compressor   air compressor portableChina Custom Oil Free Variable Speed Drive 18kw 43.7-86.2cfm 7bar Compressor for CHINAMFG Zt 18VSD-10 Compressor VSD Series Screw Air Compressor   air compressor portable
editor by CX 2024-03-05

China wholesaler 15kw Integrated Variable Speed Screw Air Compressor 20HP with Air Dryer mini air compressor

Product Description

Product Description

China Air Compressor Manufacturer 4-in-1 Combined with Tank High Pressure 20 Bar Screw Air Compressor for Laser Cutting Machine

Model RMZY-20AS
Free air delivery 1.52 m3/min
Working pressure 18~20bar(adjustable)
Inverter brand Inovance
Brand of screw air end Original CHINAMFG AA 
Control PLC controller
Driven Direct driven
Cooling By air
Electric motor PM VSD motor 400v/3ph/50hz
Discharge temperature +8 ºC than ambient
Noise less than 65 dB(A)
Air outlet size G3/4″
Air tank 400 liters, auto drain pneumatic valve
Filters 5-fold precision filters, make air oilless & dustless
Dimension 1800*850*1770mm
Weight 400kg

Product features                                                                                                                                                                                                                                                                                                                                                                                                                                                  1. 1. One-piece design, user-friendly, can be used with electricity.
2. Adopt original imported main engine to ensure high efficiency and stability, and smoother cutting.
3. Multiple protection devices, multiple shock and noise reduction configurations, low noise.
4. High-efficiency CHINAMFG dryer and 5-stage high-efficiency special-precision filter, high filtration accuracy, pressure dew point as low as 2~5°C, gas oil content as low as 0.001PPM, and particle filtration accuracy as high as 0.01um, ensuring the purity of compressed air.
5.Thermostatic control. The start and stop of the cooling fan can be set according to the season to better control the oil temperature and avoid emulsification.
6. 500L large air storage tank, full of air, stable air supply. Compressed air is deposited in the air storage tank, which is more conducive to water and sewage removal.
7. After-treatment centralized drainage, it helps to keep the customer’s site clean.

Technical Parameters

Model Air Delivery (m3/min) Rated exhaust pressure (Bar) Power (kW) Noise (Db) Outlet diameter (In) Dimension (mm) Weight (Kg) Exhaust pressure
dew point (ºC)
Exhaust dust
content (μm)
Exhaust oil content (ppm) Gas storage tank capacity (L)
RMZY-15A 1.05 16 11/15 65 G3/4 1800*900*1780 380 2~10 0.01 0.01 400
RMZY-20A 1.52 16 15/20 65 G3/4 1800*900*1780 400 2~10 0.01 0.01 400
RMZY-30A 2.41 16 22/30 65 G3/4 1800*1100*1850 500 2~10 0.01 0.01 400
RMZY-30AA 2.41 16 22/30 65 G3/4 1800*1100*1850 620 2~10 0.01 0.01 400
RMZY-15AS 1.05 18-20 11/15 65 G3/4 1800*900*1780 380 2~10 0.01 0.01 400
RMZY-20AS 1.52 18-20 15/20 68 G3/4 1800*850*1770 400 2~10 0.01 0.01 400
RMZY-30AS 2.41 18-20 22/30 68 G3/4 1800*870*1940 500 2~10 0.01 0.01 400
RMZY-30AAS 2.41 18-20 22/30 68 G3/4 2280*900*2100 620 2~10 0.01 0.01 400

Application industry

 

Successful cases

 


Packaging & Shipping

Packaging & Shipping

1.Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)
2.Shipping method: by sea, by LCL/FCL or as requested
3.Delivery method: FOB, CFR, CIF and EXW etc.

Company Profile

ZheJiang CHINAMFG Machinery Co., Ltd. is a company dedicated to the production and research and development of various gas compression equipment. The company was established in 2012 and has a total of 5 licensed technical engineers. Mainly engaged in air, nitrogen, CO2 and other special gas compression equipment and after-treat equipment. With the development in recent years, the company has established a foreign trade team in ZheJiang , and hired foreign trade consultants with 10 years of industry experience to better serve customers worldwide. With excellent quality and the support of 30 distributors worldwide, our annual sales in 2018 exceeded 5 million US dollars. We look CHINAMFG to working with you to create a better tomorrow!

Payment and delivery

After Sales Service

1. 24/7 after sales service support in different languages.
2. Customized color, Model ect.
3. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4. Delivery on time and excellent after-sales service.
5. Plenty of original spare parts with proven quality.
6. All kinds of technical documents in different languages.

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
     2. Well-trained engineers available to overseas service.
     3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
     2. Some key parts are imported from overseas
     3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: on Line Support
Warranty: 24months
Lubrication Style: Lubricated
Samples:
US$ 5000/SET
1 SET(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Oil-Free Screw Compressors Available?

Yes, oil-free screw compressors are available in the market to cater to applications where oil contamination is a concern. Here’s a detailed explanation:

Oil-free screw compressors, as the name suggests, are designed to operate without the use of lubricating oil in the compression chamber. These compressors offer several advantages in industries where oil-free compressed air or gas is required, such as in food and beverage, pharmaceutical, electronics, and certain manufacturing processes.

The key features and considerations of oil-free screw compressors include:

  • 1. Specialized Design: Oil-free screw compressors are designed with specialized materials, coatings, and sealing systems to eliminate the need for lubricating oil in the compression process. The rotors and other internal components are constructed to ensure minimal friction and wear, even in the absence of oil.
  • 2. Dry Compression: Unlike lubricated screw compressors, oil-free screw compressors rely on dry compression methods. The compression chamber is designed to achieve compression without the presence of oil, ensuring that the discharged air or gas is free from oil contaminants. This is particularly critical in industries where oil contamination can have detrimental effects on product quality or equipment performance.
  • 3. Sealing Technology: Oil-free screw compressors employ advanced sealing technologies to prevent air or gas leakage between the high-pressure and low-pressure sides of the compressor. These sealing systems ensure efficient compression while maintaining the required clearances between the rotors and the compressor housing.
  • 4. Cooling Systems: Oil-free screw compressors utilize alternative cooling methods, such as air or water cooling, to dissipate the heat generated during compression. Efficient cooling is crucial to prevent overheating and ensure reliable operation.
  • 5. Filtration Systems: Oil-free compressors often incorporate high-quality filtration systems to remove particulates, moisture, and other contaminants from the incoming air or gas. These filtration systems help maintain the integrity of the compressor and ensure the delivery of clean, oil-free compressed air or gas.
  • 6. Application-Specific Solutions: Oil-free screw compressors are available in various sizes and configurations to meet specific application requirements. They can be tailored to deliver the desired air or gas flow rates, pressures, and purity levels.

It’s important to note that oil-free screw compressors generally have higher initial costs compared to lubricated compressors due to their specialized design and materials. However, they offer benefits such as reduced maintenance, minimized risk of oil contamination, and compliance with stringent industry standards or regulations.

When considering an oil-free screw compressor, it’s crucial to assess the specific application needs, air quality requirements, and operating conditions. Consulting with manufacturers or suppliers can help in selecting the most suitable oil-free screw compressor for a particular industry or process.

In summary, oil-free screw compressors are available and offer a reliable and efficient solution for applications where oil-free compressed air or gas is essential. These compressors are designed with specialized features to ensure dry compression, reliable sealing, effective cooling, and high-quality filtration.

air compressor

What Is the Role of Air Dryers in Screw Compressor Systems?

Air dryers play a crucial role in screw compressor systems by removing moisture from the compressed air. Here’s a detailed explanation:

Air contains moisture in the form of water vapor, which can be problematic when compressed. As air is compressed, its temperature rises, causing the moisture to condense into liquid water. This moisture can cause various issues within the compressed air system, including equipment corrosion, decreased efficiency, and compromised air quality.

The role of air dryers in screw compressor systems is to remove this moisture from the compressed air, ensuring dry and clean air for reliable and efficient operation. Here are the key functions and benefits of air dryers:

1. Moisture Removal:

Air dryers extract moisture from the compressed air, reducing its dew point temperature. By lowering the dew point, the risk of condensation and subsequent issues, such as corrosion and water damage to pneumatic equipment, is minimized. Dry air is essential for maintaining the integrity and longevity of the system components.

2. Protection of Pneumatic Equipment:

Moisture in the compressed air can negatively impact pneumatic equipment, including valves, actuators, and air tools. It can cause rust, corrosion, and malfunctioning of these components. By using air dryers to remove moisture, the risk of damage to the equipment is significantly reduced, extending their lifespan and ensuring reliable performance.

3. Prevention of Contamination:

Moisture in compressed air can also lead to the growth of microorganisms, such as bacteria and fungi, within the system. These contaminants can contaminate the air and pose a health risk or cause product spoilage in sensitive applications, such as food and pharmaceutical industries. Air dryers help prevent the growth of these contaminants, ensuring clean and safe compressed air.

4. Enhanced Efficiency:

Dry compressed air improves the efficiency of the overall system. Moisture in the air can cause pressure drop issues, affecting the performance of pneumatic tools and equipment. Dry air allows for optimal operation, reducing energy consumption and enhancing system efficiency.

5. Reduced Maintenance and Downtime:

Moisture-related issues can lead to increased maintenance requirements and system downtime. By removing moisture with air dryers, the need for frequent maintenance and repairs caused by water-related problems is minimized. This helps in reducing costly downtime and improving productivity.

There are different types of air dryers commonly used in screw compressor systems:

a) Refrigerated Air Dryers: These dryers cool the compressed air, causing moisture to condense and separate from the air stream. The condensed water is then drained from the system, leaving behind dry air.

b) Desiccant Air Dryers: These dryers utilize desiccant materials, such as silica gel or activated alumina, to adsorb moisture from the compressed air. The desiccant material undergoes a regeneration process to remove the accumulated moisture, ensuring continuous drying of the compressed air.

c) Membrane Air Dryers: These dryers use permeable membranes to selectively remove moisture from the compressed air. The membranes allow water vapor to pass through while retaining dry air, effectively drying the compressed air stream.

The selection of the appropriate air dryer depends on factors such as the desired level of moisture removal, the specific application requirements, and the operating conditions of the screw compressor system.

In summary, air dryers play a vital role in screw compressor systems by removing moisture from the compressed air. They protect equipment, prevent contamination, enhance efficiency, and reduce maintenance and downtime. By ensuring dry and clean compressed air, air dryers contribute to the longevity, reliability, and optimal performance of the entire compressed air system.

air compressor

What Are the Advantages of Using a Screw Compressor?

Using a screw compressor offers several advantages in various applications. Here’s a detailed explanation:

High Efficiency:

Screw compressors are known for their high efficiency in converting electrical power into compressed air or gas. The rotary positive displacement design of screw compressors allows them to deliver a large volume of compressed air or gas with minimal energy loss. This high efficiency results in cost savings and reduced energy consumption compared to other types of compressors.

Continuous Operation:

One of the key advantages of screw compressors is their ability to provide a continuous flow of compressed air or gas. The interlocking helical rotors ensure a smooth and continuous compression process without pulsations. This feature is particularly beneficial in applications that require a steady and reliable source of compressed air, such as in manufacturing plants and industrial processes.

Compact Design:

Screw compressors are known for their compact design, which allows for space-saving installation. They have a relatively small footprint compared to other types of compressors, making them suitable for applications where space is limited. The compact design also facilitates ease of installation and integration into existing systems.

Low Vibration and Noise Levels:

Screw compressors are designed to operate with low vibration levels, resulting in smooth and quiet operation. The interlocking rotors and balanced design help in minimizing vibrations, reducing the need for additional vibration isolation measures. The low noise levels make screw compressors suitable for applications where noise reduction is important, such as in office environments or noise-sensitive industrial settings.

Wide Range of Capacities:

Screw compressors are available in a wide range of capacities, allowing for flexibility in meeting different compressed air or gas requirements. Whether it’s a small-scale application or a large industrial process, there are screw compressors available to match the specific capacity needs. This versatility makes screw compressors suitable for a variety of industries and applications.

Oil-Injected and Oil-Free Options:

Screw compressors are offered in both oil-injected and oil-free variants, providing options to meet different application requirements. Oil-injected screw compressors use lubricating oil for cooling, sealing, and reducing friction between the rotors. They are commonly used in industrial applications where a small amount of oil in the compressed air is acceptable. Oil-free screw compressors, on the other hand, eliminate the need for oil and provide contaminant-free compressed air. They are preferred in industries such as food and beverage, pharmaceuticals, and electronics, where oil-free air is critical.

Overall, using a screw compressor offers advantages such as high efficiency, continuous operation, compact design, low vibration and noise levels, capacity flexibility, and options for oil-injected or oil-free operation. These benefits make screw compressors a popular choice in various industries for a wide range of applications.

China wholesaler 15kw Integrated Variable Speed Screw Air Compressor 20HP with Air Dryer   mini air compressorChina wholesaler 15kw Integrated Variable Speed Screw Air Compressor 20HP with Air Dryer   mini air compressor
editor by CX 2024-03-05

China Good quality CHINAMFG 37kw 75kw 90kw 110kw 132kw Water Air Cooled Industrial Permanent Magnet Variable Speed Inverter Rotary Screw Air Compressor mini air compressor

Product Description

Airstone 37kw 75kw 90kw 110kw 132kw water Air Cooled  Industrial Permanent Magnet Variable Speed Inverter Rotary Screw Air Compressor

Model number AS-175PMC
Driven method Direct driven
Capacity 7.14-22.8M3/MIN @8bar
Motor IP54
Type Direct driven compressor
Applicant for Mould industry, plastic injection machine, printing industry, 4S shop etc

Detailed Photos

Detail

 

 

Technical data for Energy Saving PM series compressor

 

Company Profile

HangZhou Xihu (West Lake) Dis. Mechanical Equipment Co., Ltd. is located in B district of lianhua industrial park, HangZhou city, ZheJiang province. The company was founded in May 2018, covers an area of more than 150 acres, and has a factory building of more than 6,000 square meters. The company has more than 300 fixed employees, more than 50 skilled workers, and more than 40 sets of large-scale production equipment.
The company has a complete equipment production system. In order to strengthen the integration of the industry, the company passed the ISO9001:2008 international quality management system verification at the end of 2018. After the company’s unity, positive and facing fierce market competition, the company is relying on its own advantages to integrate external resources, optimize pioneering and innovation, and move CHINAMFG in the direction of diversified business and diversified operations. The company is mainly engaged in the production of screw air compressors and spare parts. The main products are fix speed screw air compressor,variable frequency speed screw air compressor, permanent magnet variable frequency speed screw air compressor and two-stage screw air compressor. At the end of 2018, the company joined forces with famous school designers to develop integrated screw compressors. The pressure range is 0.4mpa-1.6mpa and the power is 4kw-315kw. It can be customized to meet the requirements of different climate buyers in different countries.Although it was only established for 1 year, with the advantage of high cost performance, energy saving and environmental protection, our customers have reached more than 2,000 in the world. The company has always been committed to revitalizing the national industry and building internationally renowned brands to provide users with time. The most perfect gas supply is the mission. With the aim of flow management, first-class technology, first-class products and first-class service, the brand of ZhiQi will be carried forward.

Certifications

Successful Project

 

FAQ

Q1. How about the package for this compressor?
A: Generally, we pack our goods in neutral wooden case. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of 175hp screw air compressor payment?
A: 100%T/T in advance, L/C, Paypal before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of 132kw air compressor screw type delivery?
A: EXW, FOB, CFR, CIF, DDU are available.

Q4. How about your delivery time for this compresores?
A: Generally, it will take 25-27 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce the 132kw air compressor screw type according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the 175hp screw air compressor sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your 132kw air compressor screw type before delivery?
A: Yes, we have 100% test before delivery, don’t worry about the compressor quality.

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 2 Years
Lubrication Style: Lubricated
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

What Industries Commonly Use Screw Compressors?

Screw compressors are widely used in various industries due to their efficiency, reliability, and versatility. Here’s a detailed overview of the industries that commonly utilize screw compressors:

  • 1. Manufacturing: Screw compressors find extensive use in manufacturing industries such as automotive, aerospace, electronics, and appliances. They are employed for applications such as powering pneumatic tools, operating production lines, providing compressed air for painting, and controlling automated processes.
  • 2. Oil and Gas: The oil and gas industry extensively utilizes screw compressors for various purposes. They are employed in upstream operations for natural gas gathering, gas lift systems, and wellhead compression. In downstream operations, screw compressors are used in refining processes, gas transmission, and storage facilities.
  • 3. Chemical and Petrochemical: Screw compressors play a crucial role in chemical and petrochemical industries. They are used for compressing gases in chemical reactions, providing instrument air for control systems, powering pneumatic conveying systems, and handling various process gases in refining and production processes.
  • 4. Food and Beverage: Screw compressors are employed in the food and beverage industry for applications such as refrigeration, freezing, and air supply for packaging processes. They help maintain optimal temperature and humidity conditions, ensuring the quality and safety of food and beverage products.
  • 5. Pharmaceutical and Healthcare: Screw compressors are utilized in pharmaceutical manufacturing facilities, research laboratories, and healthcare institutions. They provide clean, oil-free compressed air for critical processes, such as pharmaceutical production, medical device manufacturing, and laboratory analysis. High-quality compressed air is essential to meet stringent quality and regulatory standards in these industries.
  • 6. Power Generation: Screw compressors find applications in power generation facilities, including gas turbine power plants, combined heat and power (CHP) systems, and cogeneration plants. They are used for inlet air compression, fuel gas boosting, and other compressed air requirements in power generation processes.
  • 7. Construction and Mining: Screw compressors are widely used in construction and mining industries for powering pneumatic tools, drilling equipment, and material handling systems. They provide the necessary compressed air for efficient and reliable operation in demanding construction and mining environments.
  • 8. Municipal and Wastewater Treatment: Screw compressors are utilized in municipal water treatment and wastewater treatment plants. They play a vital role in aeration processes, where compressed air is introduced into water or wastewater to promote biological treatment and ensure effective removal of contaminants.
  • 9. Printing and Packaging: Screw compressors are employed in printing and packaging industries for applications such as air drying, air cushioning, and powering pneumatic systems in printing presses and packaging machinery. They ensure consistent and reliable compressed air supply for efficient production processes.
  • 10. Automotive and Transportation: Screw compressors are used in automotive and transportation industries for applications such as air conditioning systems in vehicles, pneumatic braking systems, and compressed air supply for tire inflation and maintenance.

These are just a few examples, and screw compressors find applications in numerous other industries, including textiles, plastics, pulp and paper, steel and metal fabrication, electronics manufacturing, and more. The versatility and reliability of screw compressors make them a popular choice across a wide range of industrial sectors.

air compressor

What Is the Role of Air Dryers in Screw Compressor Systems?

Air dryers play a crucial role in screw compressor systems by removing moisture from the compressed air. Here’s a detailed explanation:

Air contains moisture in the form of water vapor, which can be problematic when compressed. As air is compressed, its temperature rises, causing the moisture to condense into liquid water. This moisture can cause various issues within the compressed air system, including equipment corrosion, decreased efficiency, and compromised air quality.

The role of air dryers in screw compressor systems is to remove this moisture from the compressed air, ensuring dry and clean air for reliable and efficient operation. Here are the key functions and benefits of air dryers:

1. Moisture Removal:

Air dryers extract moisture from the compressed air, reducing its dew point temperature. By lowering the dew point, the risk of condensation and subsequent issues, such as corrosion and water damage to pneumatic equipment, is minimized. Dry air is essential for maintaining the integrity and longevity of the system components.

2. Protection of Pneumatic Equipment:

Moisture in the compressed air can negatively impact pneumatic equipment, including valves, actuators, and air tools. It can cause rust, corrosion, and malfunctioning of these components. By using air dryers to remove moisture, the risk of damage to the equipment is significantly reduced, extending their lifespan and ensuring reliable performance.

3. Prevention of Contamination:

Moisture in compressed air can also lead to the growth of microorganisms, such as bacteria and fungi, within the system. These contaminants can contaminate the air and pose a health risk or cause product spoilage in sensitive applications, such as food and pharmaceutical industries. Air dryers help prevent the growth of these contaminants, ensuring clean and safe compressed air.

4. Enhanced Efficiency:

Dry compressed air improves the efficiency of the overall system. Moisture in the air can cause pressure drop issues, affecting the performance of pneumatic tools and equipment. Dry air allows for optimal operation, reducing energy consumption and enhancing system efficiency.

5. Reduced Maintenance and Downtime:

Moisture-related issues can lead to increased maintenance requirements and system downtime. By removing moisture with air dryers, the need for frequent maintenance and repairs caused by water-related problems is minimized. This helps in reducing costly downtime and improving productivity.

There are different types of air dryers commonly used in screw compressor systems:

a) Refrigerated Air Dryers: These dryers cool the compressed air, causing moisture to condense and separate from the air stream. The condensed water is then drained from the system, leaving behind dry air.

b) Desiccant Air Dryers: These dryers utilize desiccant materials, such as silica gel or activated alumina, to adsorb moisture from the compressed air. The desiccant material undergoes a regeneration process to remove the accumulated moisture, ensuring continuous drying of the compressed air.

c) Membrane Air Dryers: These dryers use permeable membranes to selectively remove moisture from the compressed air. The membranes allow water vapor to pass through while retaining dry air, effectively drying the compressed air stream.

The selection of the appropriate air dryer depends on factors such as the desired level of moisture removal, the specific application requirements, and the operating conditions of the screw compressor system.

In summary, air dryers play a vital role in screw compressor systems by removing moisture from the compressed air. They protect equipment, prevent contamination, enhance efficiency, and reduce maintenance and downtime. By ensuring dry and clean compressed air, air dryers contribute to the longevity, reliability, and optimal performance of the entire compressed air system.

air compressor

Can Screw Compressors Be Used in Industrial Applications?

Yes, screw compressors are widely used in industrial applications and are well-suited for various industrial processes. Here’s a detailed explanation:

1. Manufacturing and Assembly:

Screw compressors find extensive use in manufacturing and assembly processes. They provide a reliable source of compressed air for powering pneumatic tools, such as drills, impact wrenches, and spray guns. Compressed air is also used for operating pneumatic cylinders and valves, facilitating automation and control in industrial production lines.

2. Industrial Automation:

In industrial automation systems, screw compressors play a crucial role in providing compressed air for actuating control valves, operating robotic arms, and powering pneumatic actuators. The continuous and reliable supply of compressed air from screw compressors ensures the smooth operation of automated machinery and equipment.

3. HVAC Systems:

Screw compressors are commonly used in large-scale heating, ventilation, and air conditioning (HVAC) systems. They are employed in chillers, which cool water or air for air conditioning and refrigeration purposes. Screw compressors in HVAC systems offer high energy efficiency, making them cost-effective and environmentally friendly options for large commercial and industrial buildings.

4. Food and Beverage Industry:

The food and beverage industry relies on screw compressors for various applications. They are used for providing compressed air in food processing and packaging operations, such as pneumatic conveying, filling, labeling, and sealing. Screw compressors used in this industry are often of the oil-free type to ensure air purity and prevent contamination of food products.

5. Pharmaceuticals and Healthcare:

In the pharmaceutical and healthcare sectors, screw compressors are vital for critical applications. They provide clean and oil-free compressed air required for pharmaceutical manufacturing processes, including tablet coating, fermentation, lyophilization, and cleanroom operations. Screw compressors with strict air quality standards, such as oil-free and contaminant-free options, are commonly used in these industries.

6. Energy and Power Generation:

Screw compressors play a significant role in energy and power generation facilities. They are used for processes such as gas compression, pneumatic conveying of coal and biomass, and control air supply in power plants. Screw compressors in these applications are designed to handle high pressures and large volumes of gas.

7. Mining and Construction:

In mining and construction industries, screw compressors are employed for various tasks. They power pneumatic tools and equipment used in drilling, rock blasting, material handling, and construction activities. Screw compressors are valued for their reliability, continuous operation, and ability to withstand harsh operating conditions.

8. Oil and Gas Industry:

The oil and gas industry extensively uses screw compressors for gas compression and processing. Screw compressors are employed in natural gas pipelines, gas processing plants, and refineries. They handle the compression of gases, such as natural gas, hydrogen, and process gases, ensuring efficient transportation and refining operations.

These are just a few examples of the industrial applications where screw compressors are commonly used. Their high efficiency, continuous operation, compact design, and capacity flexibility make them well-suited for a wide range of industrial processes and systems.

China Good quality CHINAMFG 37kw 75kw 90kw 110kw 132kw Water Air Cooled Industrial Permanent Magnet Variable Speed Inverter Rotary Screw Air Compressor   mini air compressorChina Good quality CHINAMFG 37kw 75kw 90kw 110kw 132kw Water Air Cooled Industrial Permanent Magnet Variable Speed Inverter Rotary Screw Air Compressor   mini air compressor
editor by CX 2024-02-29

China Good quality Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas mini air compressor

Product Description

Detailed Photos

Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas

Description&Advantages

Product Descriptions:

The gas station, which takes natural gas input through pipelines, increases the pressure on-site and then either directly fills or stores the gas in fixed storage cylinder groups (wells) for refueling CNG vehicles with CNG. The process system consists of a pressure regulation and metering device, desulfurization and dehydration equipment, a natural gas compressor, CNG storage facilities, a sequential control device, CNG refueling facilities, safety protection devices for refueling process equipment, electrical devices, CNG pipelines and components, etc

Advantages:
Our products, incorporating technology from Austria’s LMF and Germany’s CHINAMFG Demag companies, exhibit high reliability. Wearable parts like gas valves and piston rings use products from Austria’s Hoerbiger company, with a lifespan exceeding 8000 hours. The system supports soft starting, allowing frequent start and stop cycles for the compressor.  It features a wide intake range for broad adaptability. The overall skid-mounted structure results in low noise and is easy to install in urban areas, leading to investment savings.
It is equipped with a CHINAMFG PLC control system for high automation, ABB soft start (or variable frequency), and features automatic shutdown with audible and visual alarms in case of faults

Product Parameters

 

Model Inlet Pressure
(Mpa)
Outlet Pressure
(Mpa)
Capacity
(Nm3/h)
Power
(Kw)
Remarks
ZF-0.16/6-250 0.6 25 68 22  
VF-2.4/8-250 0.8 25 1300 220  
VF-0.76/10-250 1.0 25 500 Q6135DR1  
VF-2.2/10-250 1.0 25 1452 220-8  
VF-3.2/(2.5-4)-250 0.25-0.4 25 670-1000 270  
VF-2/(10-16)-250 1.0-1.6 25 1320-2000 280  
VF-2.5/3-210 0.3 21 600 132  
VF-0.11/(70-200)-250 7-20 25 468-1326 30  
VF-2.5/(0.8-1.6)-250 0.08-0.16 25 270-390 90  
VF-2/(2-3)-250 0.2-0.3 25 360-480 110  
VF-1.1/(5-6)-250 0.5-0.6 25 396-462 90  
VF-0.54/30-250 3.0 25 1004 110  
VF-0.8/30-250 3.0 25 1488 160  
VF-0.28/(40-80)-250 4.0-8.0 25 688-1360 90  
VFD-0.36/(20-200)-250 2.0-20 25 680-2210 110 Soundproof Cabin
VFD-0.32/(20-200)-250 2.0-20 25 600-1700 90 Soundproof Cabin
VFD-0.28/(20-200)-250 2.0-20 25 525-1430 75 Soundproof Cabin
VFD-0.16/(20-200)-250 2.0-20 25 600 55 Soundproof Cabin
Note: This series of CNG refueling station compressors can be customized with the following parameters: Pressure: 0.2-20Mpa, Flow rate: 400-1200 Nm³/h.

Our Factory

 

Part of Customer Visit

 

Certifications & Testing

 

Related Product

 

FAQ

Q:Are you a factory?

A:Yes, we are indeed a factory. We specialize in manufacturing high-quality Air/Gas Compressors and are proud to be a primary source for these products.

Q:How long is your delivery time?
A:It varies depending on the specific situation. For our standard configuration compressors, the delivery time is around 30 days. For customized compressors, it usually takes about 30-45 days.

Q:What technical support do you offer?
A:We offer comprehensive technical support to our clients, including remote assistance for installation and commissioning processes. Additionally, we have a team of seasoned engineers ready to be deployed to international client locations for meticulous on-site debugging, installation, and post-installation services.

Q:What is your warranty period?
A:Our warranty policy is valid for a period of 18 months from the date of commissioning at the end customer’s site or 21 months from the date of receipt by the purchaser, whichever comes first. This comprehensive coverage is designed to ensure total customer satisfaction and the reliability of our products

Q:How do you package the compressors?
A:For smaller compressors, we utilize robust plywood boxes that conform to export specifications.
    For the larger units, we strategically place them in freight containers, implementing secure fastening methods to safeguard            against any potential damage during the shipping process.

Q:What are your payment terms?
A:Usually, the payment is made by T/T with a 30% down payment CHINAMFG confirmation of the Proforma Invoice (PI), and the balance is to be paid after inspection and before shipment. We accept both TT and L/C at sight.

Send message  Get product Offer & Brochure!!!

 ↓↓↓

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Local Teams
Warranty: 18 Mouths
Principle: Reciprocating Compressor
Application: Back Pressure Type, Intermediate Back Pressure Type, High Back Pressure Type, Low Back Pressure Type
Performance: Low Noise, Variable Frequency, Explosion-Proof
Mute: Mute
Samples:
US$ 40000/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Does Variable Speed Control Work in Screw Compressors?

Variable speed control in screw compressors is a technology that allows the compressor’s rotational speed to be adjusted according to the compressed air or gas demand. This control method offers several benefits in terms of energy efficiency and system performance. Here’s a detailed explanation:

Variable speed control, also known as variable frequency drive (VFD) or inverter control, works by adjusting the speed of the compressor’s drive motor. The drive motor is typically an electric motor that powers the rotation of the compressor’s screw rotors.

The key components and operation of variable speed control in screw compressors are as follows:

  • 1. Drive Motor: The drive motor is connected to the compressor’s screw rotors and provides the rotational power required for compression. It is an electric motor capable of operating at variable speeds.
  • 2. Inverter or Variable Frequency Drive (VFD): The inverter or VFD is an electronic device that controls the speed of the drive motor. It converts the incoming electrical power into adjustable frequency and voltage, allowing precise control of the motor’s rotational speed.
  • 3. Control System: The control system of the screw compressor monitors and adjusts the speed of the drive motor based on the compressed air or gas demand. It receives input signals from sensors that measure parameters such as pressure, flow rate, or system demand, and sends corresponding signals to the inverter or VFD to regulate the motor speed.
  • 4. Speed Adjustment: When the demand for compressed air or gas decreases, the control system reduces the motor speed by decreasing the frequency and voltage supplied by the inverter or VFD. This results in a lower rotational speed of the screw rotors, reducing the compression capacity and power consumption of the compressor.
  • 5. Energy Efficiency: Variable speed control allows the compressor to match the output to the actual demand, avoiding energy wastage associated with constant-speed compressors. By operating at lower speeds during periods of lower demand, energy consumption can be significantly reduced. This energy-saving capability is particularly advantageous in applications with varying air or gas requirements.
  • 6. Smooth Operation: Variable speed control enables smooth and gradual motor acceleration and deceleration, minimizing mechanical stress on the compressor components and reducing the likelihood of sudden pressure surges or system shutdowns.
  • 7. System Stability: By adjusting the compressor’s speed to match the demand, variable speed control helps maintain stable system pressure and prevents excessive cycling of the compressor. This contributes to improved system performance and longevity.

It’s worth noting that variable speed control is more commonly found in larger screw compressors used in industrial and commercial applications. Smaller screw compressors may utilize fixed-speed motors due to cost considerations or simpler system requirements.

Overall, variable speed control in screw compressors offers precise capacity modulation, improved energy efficiency, enhanced system stability, and reduced maintenance requirements, making it a preferred choice in many applications where compressed air or gas demand fluctuates.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

What Is the Efficiency of Screw Compressors?

The efficiency of screw compressors can vary depending on various factors, including the design, operating conditions, and maintenance. Here’s a detailed explanation of the efficiency of screw compressors:

1. Isothermal Efficiency:

Isothermal efficiency refers to the ideal efficiency of a compressor operating under isothermal conditions. In reality, screw compressors experience temperature rise during compression, and therefore, they do not achieve isothermal efficiency. The compression process in screw compressors is considered to be relatively close to isothermal compared to other compressor types, such as reciprocating compressors. This is due to the continuous and smooth flow of air or gas through the compression chamber, which helps in minimizing temperature differences.

2. Adiabatic Efficiency:

Adiabatic efficiency refers to the actual efficiency of a compressor, taking into account the heat generated during compression. Screw compressors typically have higher adiabatic efficiency compared to reciprocating compressors. The helical design of the rotors and the presence of intermeshing lobes allow for efficient compression with minimal energy loss. The adiabatic efficiency of a screw compressor can be influenced by factors such as the compression ratio, rotational speed, and discharge pressure.

3. Overall Efficiency:

The overall efficiency of a screw compressor takes into account various factors, including mechanical losses, power consumption, and auxiliary power requirements. Mechanical losses can occur due to friction between the rotors, bearings, and other moving parts. Well-maintained screw compressors with properly lubricated components and well-aligned rotors can minimize mechanical losses and improve overall efficiency. Power consumption is another factor affecting efficiency, and it can vary depending on the size, design, and operating conditions of the compressor.

4. Energy Efficiency:

Energy efficiency is an important aspect of screw compressors. It relates to the ability of the compressor to convert electrical energy into compressed air with minimal energy waste. Energy-efficient screw compressors are designed to optimize the compression process, reduce power consumption, and maximize output for a given input. Variable Speed Drive (VSD) screw compressors, for example, can adjust the rotational speed to match the compressed air demand, resulting in improved energy efficiency and significant energy savings.

It’s important to note that the efficiency of screw compressors can vary depending on the specific model, design features, and operating conditions. Regular maintenance, including proper lubrication, cleaning, and component inspection, is crucial for maintaining high efficiency levels. Additionally, selecting the right size and type of screw compressor for the intended application is essential to achieve optimal efficiency and performance.

In summary, screw compressors are known for their relatively high efficiency compared to other compressor types. While they may not achieve perfect isothermal efficiency, their adiabatic efficiency, overall efficiency, and energy efficiency make them suitable for a wide range of industrial applications.

China Good quality Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas   mini air compressorChina Good quality Two-Stage Compression Fix Speed 75kw Screw Air Compressor for CNG Natural Gas   mini air compressor
editor by CX 2024-02-26

China high quality 250kw Variable Speed Drive Mute AC Two Stage Rotary Screw Oil Free Dry Air Compressor air compressor oil

Product Description

      

   Specification
  Model Capacitiy (FAD)M3/min Power kw Noise level db Weight KG
7bar 8.5bar 10bar Water Cooling Air Cooling
OFA1 OFA15 2.4 2.1 1.8 15 74   1,030
OFA22 3.7 3.2 2.7 22 74   1,070
OFA30 4.8 4.4 4.0 30 74   1,300
OFA37 5.9 5.3 5.0 37 74   1,355
OFA45 7.0 6.5 6.1 45 74   1,390
OFA2 OFA55 9.2 7.9 7.3 55 74   1,860
OFA75 12.2 11.2 10.7 75 74   1,935
OFA90 14.7 13.5 12.7 90 74   2,000
OFA3 OFA110 19.3 17.2 16.0 110 74   3,660
OFA132 22.9 19.5 18.8 132 74   3,700
OFA4 OFA160 29.4 25.7 23.8 160 74   5,300
OFA200 36.6 33.1 30.4 200 74   5,380
OFA250 44.5 41.0 37.4 250 74   5,450
OFA275 47.4 43.0 41.0 275 74   5,500
OFA5 OFA315 51.5 47.6 46.0 315 74   6,000
OFA355 56.3 52.6 50.4 355 74   9,050
OFW1 OFW37 5.9 5.3 5.0 37 74 1,355  
OFW45 7.0 6.5 6.1 45 74 1,450  
OFW2 OFW55 8.8 7.9 7.3 55 74 1,800  
OFW75 11.9 11.2 10.7 75 74 1,850  
OFW90 14.3 13.5 12.7 90 74 1,925  
OFW3 OFW110 19.1 17.1 16.0 110 74 2,635  
OFW132 21.9 19.6 18.9 132 74 2,760  
OFW4 OFW160 28.3 26.1 24.2 160 74 3,850  
OFW200 36.1 33.1 30.4 200 74 4,000  
OFW250 43.1 41.0 37.0 250 74 4,100  
OFW275 46.4 43.0 41.0 275 74 4,300  
OFW5 OFW315 50.9 47.6 46.0 315 74 6,550  
OFW355 56.3 52.6 50.4 355 74 6,950  
OFW400 62.1 57.8 55.8 400 74 7,050  
OFW450 76.5 71.5 63.8 450 74 8,400  
OFW500 83.9 78.3 73.1 500 74 8,400  
OFW630 102.9 95.7 89.0 630 74 9,125  
OFW750 122.8 109.6 101.8 750 74 9,225  

                                             Company Profile

ZheJiang Napu compressor Technology Co.,LTD was established in 2012  based in ZheJiang ,specializing in oil-free rotary screw air compressors, offering a wide range of products from airends to compressors . 
       With over 10 years experience in oil free screw air compressor. NAPU Compressor is compliant with ISO 8573-1, Class 0 standard and audited by TUV Rheinland and China National Quality Inspection Center of Compressor and Refrigerator.   
        The company is also compliant with ISO 9001:14001 and is CHINAMFG in the domestic market for its quality-driven culture. The oil-free compressors manufactured by the company are used in a variety of sectors including some of our valued clients like CASC-China Aerospace Science Corporation, NORINCO-China North Industries Group, CNNC-China National Nuclear Group, CHANG AN AUTO, SINOPHARM, BYD and CALT and Sino-Chemical etc.
         Continuous improvement in productivity and efficiency is our goal, and we continue to offer an extensive services including our own branded oil-free compressor package as well as after-sales services for other leading brands.

 

                                              Product Features

1. In house designed airend
2. 100% oil free air certified by Germany TUV.
3. Double-layer structure to reduce he noise.
4. Air Cooling and Water cooling are available.
5. VSD control are available.
6.Touch Screen PLC with preset running schedule, more intelligent control.
7.OEM&ODM service are accepted

 

                                                         FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of oil free air compressors. More than 20 years of experience in air compressor manufacturing.
 
Q2. What’s payment term ?
A: T/T, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
 
Q3. How about your after-sales service ?
A: 1.We can provide customers with installation and commissioning online instructions.
   
Q4. How about your warranty?
A: One year for the whole machine and 5 years for screw air end, except consumable spare parts.
 
Q5. Do you have any certificate ?
A: Yes, we can offer CE ,ISO  and certificate as clients’ demande.
 
 
Q6. How do you control quality ?
A: 1. The raw materials are strictly inspected
    2. Each compressor must pass at least 8 hours of continuous testing before leaving the factory.
  
Q7.How long could your air compressor be used?
A: Usually, more than over 10 years.

      
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Water Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

air compressor

What Is the Role of Oil in Lubricated Screw Compressors?

In lubricated screw compressors, oil plays a crucial role in ensuring optimal performance, reliability, and longevity of the compressor. Here’s a detailed explanation of the role of oil in lubricated screw compressors:

Lubrication: One of the primary functions of oil in screw compressors is to provide lubrication to the moving parts, particularly the screw rotors. The oil forms a thin film between the rotors and the compressor housing, reducing friction and wear. This lubrication minimizes mechanical losses and helps maintain efficient operation by reducing energy consumption.

Sealing: Oil also acts as a sealing medium in lubricated screw compressors. The oil film created between the rotors and the compressor housing helps create a seal, preventing air or gas leakage between the high-pressure and low-pressure sides of the compressor. This sealing action is crucial for maintaining the compressors’ efficiency and preventing losses in compression performance.

Cooling: Oil plays a vital role in cooling various components of the screw compressor. As the compressed air or gas is compressed, it generates heat. The oil absorbs a significant amount of this heat and carries it away from the compression chamber. The oil then circulates through the compressor’s oil cooling system, where it dissipates the heat to the surrounding environment or through an oil cooler. Efficient oil cooling helps prevent overheating of the compressor components, ensuring reliable operation and extending the compressor’s lifespan.

Cleaning: The oil in lubricated screw compressors acts as a cleaning agent. It carries away contaminants, such as dirt, dust, and metal particles, that may enter the compressor during operation. The oil passes through filters and separators, removing these impurities and preventing them from accumulating in the compressor’s internal components. Clean oil helps maintain the integrity of the compressor’s internal parts and reduces the risk of damage or malfunctions.

Sealing Element Lubrication: In some lubricated screw compressors, the oil also serves to lubricate the sealing elements, such as the shaft seals or labyrinth seals. Proper lubrication of these seals helps maintain their effectiveness in preventing oil leakage and maintaining the separation between the oil and the compressed air or gas.

Corrosion Protection: Oil in screw compressors often contains additives that provide corrosion protection to the internal components. These additives form a protective layer on the metal surfaces, preventing corrosion caused by moisture or contaminants present in the compressed air or gas. Corrosion prevention helps maintain the compressor’s performance, efficiency, and reliability over time.

It’s important to note that lubricated screw compressors require regular oil monitoring, oil analysis, and oil changes to ensure optimal performance. The oil level, quality, and viscosity should be regularly checked and maintained within the manufacturer’s recommended specifications.

In summary, oil in lubricated screw compressors serves crucial functions such as lubrication, sealing, cooling, cleaning, sealing element lubrication, and corrosion protection. These functions collectively contribute to the efficient and reliable operation of the compressor, extending its service life and minimizing maintenance requirements.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

What Are the Advantages of Using a Screw Compressor?

Using a screw compressor offers several advantages in various applications. Here’s a detailed explanation:

High Efficiency:

Screw compressors are known for their high efficiency in converting electrical power into compressed air or gas. The rotary positive displacement design of screw compressors allows them to deliver a large volume of compressed air or gas with minimal energy loss. This high efficiency results in cost savings and reduced energy consumption compared to other types of compressors.

Continuous Operation:

One of the key advantages of screw compressors is their ability to provide a continuous flow of compressed air or gas. The interlocking helical rotors ensure a smooth and continuous compression process without pulsations. This feature is particularly beneficial in applications that require a steady and reliable source of compressed air, such as in manufacturing plants and industrial processes.

Compact Design:

Screw compressors are known for their compact design, which allows for space-saving installation. They have a relatively small footprint compared to other types of compressors, making them suitable for applications where space is limited. The compact design also facilitates ease of installation and integration into existing systems.

Low Vibration and Noise Levels:

Screw compressors are designed to operate with low vibration levels, resulting in smooth and quiet operation. The interlocking rotors and balanced design help in minimizing vibrations, reducing the need for additional vibration isolation measures. The low noise levels make screw compressors suitable for applications where noise reduction is important, such as in office environments or noise-sensitive industrial settings.

Wide Range of Capacities:

Screw compressors are available in a wide range of capacities, allowing for flexibility in meeting different compressed air or gas requirements. Whether it’s a small-scale application or a large industrial process, there are screw compressors available to match the specific capacity needs. This versatility makes screw compressors suitable for a variety of industries and applications.

Oil-Injected and Oil-Free Options:

Screw compressors are offered in both oil-injected and oil-free variants, providing options to meet different application requirements. Oil-injected screw compressors use lubricating oil for cooling, sealing, and reducing friction between the rotors. They are commonly used in industrial applications where a small amount of oil in the compressed air is acceptable. Oil-free screw compressors, on the other hand, eliminate the need for oil and provide contaminant-free compressed air. They are preferred in industries such as food and beverage, pharmaceuticals, and electronics, where oil-free air is critical.

Overall, using a screw compressor offers advantages such as high efficiency, continuous operation, compact design, low vibration and noise levels, capacity flexibility, and options for oil-injected or oil-free operation. These benefits make screw compressors a popular choice in various industries for a wide range of applications.

China high quality 250kw Variable Speed Drive Mute AC Two Stage Rotary Screw Oil Free Dry Air Compressor   air compressor oilChina high quality 250kw Variable Speed Drive Mute AC Two Stage Rotary Screw Oil Free Dry Air Compressor   air compressor oil
editor by CX 2024-02-17

China factory 5HP 10HP 15HP 20HP 30HP 40HP 75HP 100HP High Quality IP54 Motor Electric Industrial Compressors Screw Air Compressor Variable Speed air compressor portable

Product Description

ZheJiang Xihu (West Lake) Dis. specializes in the R&D, manufacturing, sales and after sales service of compressors, which include oil-free air compressors, oil-injected air compressor and air end, special gas compressors and post-processing equipment etc, under the brand name “Xihu (West Lake) Dis.r”, “OFAC” . 

Product Features

*Efficient permanent magnet synchronous motor using high-performance NdFeb permanent magnet, 120ºC without loss of magnetic. Through the magnetic field and magnetic force generated by the AC voltage related to the stator coil, the rotor generates rotation, low speed and high efficiency.

*Advanced level of integrated host design. High efficiency, low speed, low noise, low energy consumption, low maintenance cost, reliable stability and usability. Adopt the embedded integrated shaft directly connected structure, compact structure, high transmission efficiency.

*Large capacity oil and gas separator, coupled with sophisticated oil and gas separation elements and gas, liquid filtration elements, with 3 times oil and gas separation, to ensure the quality of compressed air.

*Intake valve plate adopts international advanced technology, coupled with reasonable noise reduction design, intake valve adjustment range 0-100% easy to adjust, small pressure loss, long life.

*High efficiency cooler adopts large heat exchange area design, improve cooling efficiency, effectively imitation machine high temperature, anti-corrosion treatment of the inner wall, the use of more severe mining, prolong the service life.

TECHNICAL DATA—-OIL INJECTED SERIES
 
Model Power Pressure (bar) Air Flow (m3/min) Noise Level dBA Outlet Pipe Diameter Dimension LxWxH (mm)
BO-7.5 7.5kw 10hp 7 1.2 66±2 G 1/2″ 800*700*930
8 1.1
10 0.95
12 1.8
BO-11 11kw 15hp 7 1.65 68±2 G 3/4″ 950*750*1250
8 1.5
10 1.3
12 1.1
BO-15 15kw 20hp 7 2.5
8 2.3
10 2.1
12 1.9
BO-18.5D 18.5kw 25hp 7 3.2 G 1″ 1380*850*1160
8 3.0
10 2.7
12 2.4
BO-22D 22kw 30hp 7 3.8
8 3.6
10 3.2
12 2.7
BO-30D 30kw 40hp 7 5.3
8 5.0
10 4.5
12 4.0
BO-37D 37kw 50hp 7 6.8 G 1-1/2″ 1500*1000*1330
8 6.2
10 5.6
12 5.0
BO-45D 45kw 60hp 7 7.4 72±2
8 7.0
10 6.2
12 5.6
BO-55D 55kw 75hp 7 10.0 G 2″ 1900*1250*1570
8 9.6
10 8.5
12 7.6
BO-75D 75kw 100hp 7 13.4
8 12.6
10 11.2
12 10.0
BO-90D 90kw 125hp 7 16.2
8 15.0
10 13.8
12 12.3
BO-110D 110kw 150hp 7 21.0 G 2-1/2″ 2500*1470*1840
8 19.8
10 17.4
12 14.8
BO-132D 132kw 175hp 7 24.5 75±2
8 23.2
10 20.5
12 17.4
BO-160D 160kw 220hp 7 28.7
8 27.6
10 24.6
12 21.5
BO-185D 185kw 250hp 7 32.0 DN85 3150*1980*2150
8 30.4
10 27.4
12 24.8
BO-220D 220kw 300hp 7 36.0 82±2
8 34.3
10 30.2
12 27.7
BO-250D 250kw 350hp 7 42.0
8 40.5
10 38.2
12 34.5
BO-315D 315kw 430hp 7 51.0
8 50.2
10 44.5
12 39.5
BO-355D 355kw 480hp 7 64.0 84±2 DN100
8 61
10 56.5
12 49.0
BO-400D 400kw 545hp 7 71.2
8 68.1
10 62.8
12 62.2

 

TECHNICAL DATA
 
Model Power Pressure (bar) Air Flow (m3/min) Noise Level dBA Outlet Size Weight (kgs) Lubricating Water(L) Filter Element (B)-(Z) Dimension LxWxH (mm)
OF-7.5F 7.5kw 10hp 8 1.0 60 RP 3/4 400 22 (25cm) 1 1000*720*1050
OF-11F 11kw 15hp 8 1.6 63 460 1156*845*1250
OF-15F 15kw 20hp 8 2.5 65 RP 1 620 28 (50cm) 1 1306*945*1260
OF-18F 18.5kw 25hp 8 3.0 67 750 33 1520*1060*1390
OF-22F 22kw 30hp 8 3.6 68 840 33 1520*1060*1390
OF-30F 30kw 40hp 8 5.0 69 RP 11/4 1050 66 (25cm) 5 1760*1160*1490
OF-37F 37kw 50hp 8 6.2 71 1100 1760*1160*1490
OF-45S 45kw 60hp 8 7.3 74 RP 11/2 1050 88 1760*1160*1490
OF-45F 45kw 60hp 8 7.3 74 1200 1760*1160*1490
OF-55S 55kw 75hp 8 10 74 RP 2 1250 110 (50cm) 5 1900*1250*1361
OF-55F 55kw 75hp 8 10 74 2200 (50cm) 7 2350*1250*1880
OF-75S 75kw 100hp 8 13 75 1650 (50cm) 5 1900*1250*1361
OF-75F 75kw 100hp 8 13 75 2500 (50cm) 7 2550*1620*1880
OF-90S 90kw 125hp 8 15 76 2050 (50cm) 5 1900*1250*1361
OF-90F 90kw 125hp 8 15 76 2650 (50cm) 7 2550*1620*1880
OF-110S 110kw 150hp 8 20 78 DN 65 2550 130 (50cm) 12 2200*1600*1735
OF-110F 110kw 150hp 8 20 78 3500 130 3000*1700*2250
OF-132S 132kw 175hp 8 23 80 2700 130 2200*1600*2250
OF-160S 160kw 220hp 8 26 82 2900 165 2200*1600*2250
OF-185S 185kw 250hp 8 30 83 DN 100 3300 180 (50cm) 22 2860*1800*1945
OF-200S 200kw 270hp 8 33 83 3500 2860*1800*1945
OF-220S 220kw 300hp 8 36 85 4500 2860*2000*2300
OF-250S 250kw 340hp 8 40 85 4700 2860*2000*2300
OF-315S 315kw 480hp 8 50 90 5000 2860*2000*2300

 F– air cooling method     S– water cooling method

                           

FAQ

Q1: Warranty terms of your machine?
A1: Two year warranty for the machine and technical support according to your needs.

Q2: Will you provide some spare parts of the machines?
A2: Yes, of course.

Q3: What about product package?
A3: We pack our products strictly with standard seaworthy case. Rcommend wooden box.

Q4: Can you use our brand?
A4: Yes, OEM is available.

Q5: How long will you take to arrange production?
A5: Immediate delivery for stock products. 380V 50HZ we can delivery the goods within 3-15 days. Other  voltage or other color we will delivery within 30-45 days.

Q6: How Many Staff Are There In your Factory?
A6: About 100.
 
Q7: What’s your factory’s production capacity?
A7: About 550-650 units per month.

Q8: What the exactly address of your factory?
A8: Our first workshop located in HangZhou, ZheJiang , second workshop located in HangZhou, ZheJiang ,  China.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 1 Year
Lubrication Style: Lubricated
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can Screw Compressors Be Used for Air Conditioning?

Yes, screw compressors can be used for air conditioning applications, particularly in larger commercial and industrial HVAC systems. Here’s a detailed explanation:

Screw compressors are a type of positive displacement compressor that can effectively handle large volumes of gas or air. They are known for their high efficiency, reliability, and ability to provide continuous operation. These qualities make screw compressors well-suited for air conditioning systems that require the compression of refrigerant gases to facilitate cooling.

In air conditioning applications, screw compressors are commonly used in two types of systems:

  • 1. Chillers: Screw compressors are frequently employed in chiller systems, which are central air conditioning units that cool water or another secondary refrigerant. In chiller-based air conditioning systems, the screw compressor works in conjunction with other components such as evaporators, condensers, and expansion valves to extract heat from the chilled water or secondary refrigerant and provide cooling to the desired space.
  • 2. Variable Refrigerant Flow (VRF) Systems: VRF systems utilize multiple individual indoor units connected to a single outdoor unit. These systems can provide simultaneous heating and cooling to different zones within a building. In VRF systems, screw compressors are often used in the outdoor units to compress the refrigerant gas, which is then distributed to the indoor units for heat exchange and cooling.

The advantages of using screw compressors in air conditioning systems include:

  • 1. High Capacity: Screw compressors are capable of handling large volumes of gas or air, making them suitable for air conditioning applications that require high cooling capacities.
  • 2. Energy Efficiency: Screw compressors can deliver high energy efficiency, especially when equipped with variable speed drives (VSD) that allow the compressor to adjust its speed based on the cooling demand. This leads to energy savings and improved system performance.
  • 3. Reliability: Screw compressors are known for their reliability and durability, making them a suitable choice for air conditioning systems that require continuous operation and long service life.
  • 4. Smooth Operation: Screw compressors operate with minimal vibration and noise, contributing to a comfortable and quiet air conditioning environment.
  • 5. Control Flexibility: Screw compressors can offer control flexibility, allowing for efficient modulation of cooling capacity based on the cooling load. This enables precise temperature control and improves overall system performance.

It’s important to note that screw compressors used in air conditioning systems require proper installation, maintenance, and periodic inspections to ensure optimal performance and longevity. Regular maintenance tasks, such as checking refrigerant levels, cleaning filters, and inspecting compressor components, should be performed in accordance with the manufacturer’s recommendations.

In summary, screw compressors can be effectively used for air conditioning applications, particularly in larger commercial and industrial HVAC systems. Their high capacity, energy efficiency, reliability, smooth operation, and control flexibility make them well-suited for chiller and VRF systems. Proper installation, maintenance, and adherence to manufacturer guidelines are essential for optimal performance and longevity of screw compressors in air conditioning applications.

air compressor

How Do You Maintain the Air Quality in a Screw Compressor System?

Maintaining air quality in a screw compressor system is crucial to ensure the performance, efficiency, and reliability of the compressed air. Here’s a detailed explanation:

1. Proper Intake Filtration:

Install high-quality intake filters to prevent contaminants, such as dust, dirt, and debris, from entering the screw compressor system. These filters should have an appropriate filtration rating to effectively capture particles of the desired size. Regularly inspect and clean or replace the intake filters to maintain their effectiveness.

2. Compressed Air Dryers:

Use compressed air dryers, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air. Moisture can lead to corrosion, damage to pneumatic equipment, and compromised air quality. The type of dryer selected depends on the specific application requirements and the desired level of moisture removal.

3. Oil Removal Filters:

In oil-injected screw compressors, oil is used for lubrication, which can contaminate the compressed air. Install oil removal filters downstream of the compressor to remove any oil carryover from the compressed air. These filters typically use coalescing technology to separate and trap oil particles, ensuring clean air quality.

4. Condensate Management:

Effectively manage condensate, which is formed when moisture in the compressed air condenses as it cools. Install condensate drains and separators to remove and properly dispose of condensate. Improper condensate management can lead to water contamination in the compressed air system.

5. Regular Maintenance:

Perform regular maintenance tasks as recommended by the manufacturer, including oil changes, filter replacements, and inspections. Proper maintenance helps ensure that the compressor system operates efficiently and minimizes the risk of contaminants entering the compressed air.

6. Air Receiver Tank Maintenance:

If the screw compressor system includes an air receiver tank, regularly inspect and clean the tank to remove any accumulated debris or contaminants. Additionally, ensure that the tank’s drain valve is functioning correctly to remove any water or condensate from the tank.

7. Leak Detection and Repair:

Regularly inspect the compressed air system for leaks. Leaks not only waste energy but also allow contaminants from the surrounding environment to enter the system. Use appropriate leak detection methods, such as ultrasonic detectors or soapy water solutions, to identify and promptly repair any leaks.

8. Monitor and Control Operating Conditions:

Monitor and maintain proper operating conditions within the screw compressor system. This includes monitoring discharge pressure, temperature, and other relevant parameters to ensure they are within acceptable ranges. Implement appropriate control strategies, such as regulating compressor capacity or adjusting dryer settings, to optimize air quality while meeting the specific application requirements.

9. Training and Awareness:

Provide training to operators and maintenance personnel on the importance of air quality in a screw compressor system. Ensure they understand proper maintenance procedures, the significance of filtration, and how to identify and address potential air quality issues.

10. Compliance with Regulations:

Be aware of and comply with relevant regulations and standards governing air quality in your specific industry or application. This may include adherence to guidelines such as ISO 8573, which specifies air purity classes for different contaminants in compressed air systems.

By following these practices, you can maintain the air quality in a screw compressor system, ensuring clean, reliable, and high-quality compressed air for various applications.

air compressor

Can Screw Compressors Handle High-Pressure Applications?

Yes, screw compressors are capable of handling high-pressure applications. Here’s a detailed explanation:

Screw compressors are known for their ability to deliver high-pressure compressed air or gas. The design of screw compressors allows them to achieve higher pressure ratios compared to other types of compressors, such as reciprocating piston compressors.

The compression process in screw compressors is continuous and smooth, which enables them to handle high-pressure requirements efficiently. The intermeshing rotors create compression chambers that gradually reduce in volume, resulting in the compression of air or gas. By adjusting the rotational speed of the rotors and optimizing the design parameters, screw compressors can generate the desired high discharge pressures.

However, it’s important to note that the maximum pressure capability of a screw compressor may vary depending on factors such as:

  • 1. Compressor Design: The design features of the screw compressor, including the rotor profile, sealing mechanism, and cooling system, can influence its maximum pressure capacity.
  • 2. Rotor Size and Speed: The size and rotational speed of the rotors impact the compression ratio and, consequently, the achievable discharge pressure. Larger rotors and higher rotational speeds generally allow for higher pressure ratios.
  • 3. Drive Power: The power of the drive motor connected to the screw compressor affects its ability to handle high-pressure applications. Adequate power is necessary to overcome the resistance and maintain the desired compression ratio.
  • 4. Structural Integrity: The structural integrity and material strength of the compressor housing, rotors, and other components determine the maximum pressure that the compressor can withstand without failure or leakage.

It’s important to select a screw compressor with the appropriate specifications and consult the manufacturer’s guidelines to ensure that it can handle the specific high-pressure requirements of the application.

Additionally, it’s worth noting that high-pressure applications may also require additional equipment, such as pressure vessels or downstream pressure regulators, to safely handle and control the compressed air or gas at the desired pressure levels.

China factory 5HP 10HP 15HP 20HP 30HP 40HP 75HP 100HP High Quality IP54 Motor Electric Industrial Compressors Screw Air Compressor Variable Speed   air compressor portableChina factory 5HP 10HP 15HP 20HP 30HP 40HP 75HP 100HP High Quality IP54 Motor Electric Industrial Compressors Screw Air Compressor Variable Speed   air compressor portable
editor by CX 2024-02-07

China supplier 15kw 20 Bar Variable Speed Laser Cut Screw Air Compressor 20HP air compressor portable

Product Description

Product Description

15kw 20 bar variable speed CHINAMFG laser cut screw air compressor 20HP with tankP

All in 1 solution
Rocky ALL IN ONE series compressed air system integrates screw air compressor, refrigerated air dryer, and air receiver tank into 1 assembly. This compact assembly provides a complete solution to produce clean and dry compressed air. Simplicity in just connecting an outlet pipe, drain pipe, and electrical cables to the system saves cost and space.

Technical Parameters

Model RMZY-20AS
Free air delivery 1.52 m3/min
Working pressure 18~20bar(adjustable)
Inverter brand Inovance
Brand of screw air end Original CHINAMFG AA 
Control PLC controller
Driven Direct driven
Cooling By air
Electric motor PM VSD motor 400v/3ph/50hz
Discharge temperature +8 ºC than ambient
Noise less than 65 dB(A)
Air outlet size G3/4″
Air tank 400 liters, auto drain pneumatic valve
Filters 5-fold precision filters, make air oilless & dustless
Dimension 1800*850*1770mm
Weight 400kg

 

High Pressure Screw Air Compressor for Fiber Laser Cutting Application
Model Air Delivery
(m3/min)       
max
Exhaust
pressure
(Bar) 
max
Power
 (kW/HP)
Noise
(Db)
Outlet
diameter
Dimension (mm)   Weight
    (Kg)
Exhaust
pressure
dew point (ºC)
Exhaust dust
content (μm)
Exhaust oil
content (ppm)
Gas storage
tank capacity (L)
RMZY-15A 1.05 16 11/15 65 G3/4 1800*900*1780 430 2~10 0.01 0.001 400
RMZY-20A 1.52 16 15/20 65 G3/4 1800*900*1780 450 2~10 0.01 0.001 400
RMZY-30A 2.41 16 22/30 68 G3/4 1880*900*1980 550 2~10 0.01 0.001 400
RMZY-30AA 2.41 16 22/30 70 G3/4 2250*900*2080 700 -20 0.01 0.001 400
RMZY-50AA 3.9 16 37/50 70 G3/4 2660*1000*2050 980 -20 0.01 0.001 600
RMZY-15AS 1.05 20 11/15 65 G3/4 1800*900*1780 460 2~10 0.01 0.001 400
RMZY-20AS 1.52 20 15/20 65 G3/4 1800*900*1780 480 2~10 0.01 0.001 400
RMZY-30AS 2.41 20 22/30 68 G3/4 1880*900*1980 600 2~10 0.01 0.001 400
RMZY-30AAS 2.41 20 22/30 70 G3/4 2250*900*2080 780 -20 0.01 0.001 400
RMZY-50AAS 3.9 20 37/50 70 G3/4 2660*1000*2050 1080 -20 0.01 0.001 600

Product features                                                                                                                                                                                                                                                                                                                                                                                                                                                        
1. Latest high-tech screw air end, ensure high stability, smoother cutting and better-looking cutting surface.
2.Multiple high-efficiency oil and water removal devices ensure the compressed air entering the laser cutting machine is dry and oil-less.
3.Thermostatic control minimizes the moisture content of the air, ensuring system reliability & lifetime.
4.Equipped with a large-capacity air storage tank, which stabilizes the air supply pressure and condensates the moisture.
5.The integrated automatic drainage system improves the purity and dryness of the compressed air, significantly keeps the laser lens clean away from contamination.
6.All-in-1 design, user-friendly,easy to use and transport.

Successful cases

Packaging & Shipping

Packaging & Shipping

1.Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)
2.Shipping method: by sea, by LCL/FCL or as requested
3.Delivery method: FOB, CFR, CIF and EXW etc.

Company Profile

ZheJiang CHINAMFG Machinery Co., Ltd. is a company dedicated to the production and research and development of various gas compression equipment. The company was established in 2012 and has a total of 5 licensed technical engineers. Mainly engaged in air, nitrogen, CO2 and other special gas compression equipment and after-treat equipment. With the development in recent years, the company has established a foreign trade team in ZheJiang , and hired foreign trade consultants with 10 years of industry experience to better serve customers worldwide. With excellent quality and the support of 30 distributors worldwide, our annual sales in 2018 exceeded 5 million US dollars. We look CHINAMFG to working with you to create a better tomorrow!

Product process

 

Payment and delivery

 

After Sales Service

1. 24/7 after sales service support in different languages.
2. Customized color, Model ect.
3. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4. Delivery on time and excellent after-sales service.
5. Plenty of original spare parts with proven quality.
6. All kinds of technical documents in different languages.

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
     2. Well-trained engineers available to overseas service.
     3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
     2. Some key parts are imported from overseas
     3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Warranty: 24month
Lubrication Style: Lubricated
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Oil-Free Screw Compressors Available?

Yes, oil-free screw compressors are available in the market to cater to applications where oil contamination is a concern. Here’s a detailed explanation:

Oil-free screw compressors, as the name suggests, are designed to operate without the use of lubricating oil in the compression chamber. These compressors offer several advantages in industries where oil-free compressed air or gas is required, such as in food and beverage, pharmaceutical, electronics, and certain manufacturing processes.

The key features and considerations of oil-free screw compressors include:

  • 1. Specialized Design: Oil-free screw compressors are designed with specialized materials, coatings, and sealing systems to eliminate the need for lubricating oil in the compression process. The rotors and other internal components are constructed to ensure minimal friction and wear, even in the absence of oil.
  • 2. Dry Compression: Unlike lubricated screw compressors, oil-free screw compressors rely on dry compression methods. The compression chamber is designed to achieve compression without the presence of oil, ensuring that the discharged air or gas is free from oil contaminants. This is particularly critical in industries where oil contamination can have detrimental effects on product quality or equipment performance.
  • 3. Sealing Technology: Oil-free screw compressors employ advanced sealing technologies to prevent air or gas leakage between the high-pressure and low-pressure sides of the compressor. These sealing systems ensure efficient compression while maintaining the required clearances between the rotors and the compressor housing.
  • 4. Cooling Systems: Oil-free screw compressors utilize alternative cooling methods, such as air or water cooling, to dissipate the heat generated during compression. Efficient cooling is crucial to prevent overheating and ensure reliable operation.
  • 5. Filtration Systems: Oil-free compressors often incorporate high-quality filtration systems to remove particulates, moisture, and other contaminants from the incoming air or gas. These filtration systems help maintain the integrity of the compressor and ensure the delivery of clean, oil-free compressed air or gas.
  • 6. Application-Specific Solutions: Oil-free screw compressors are available in various sizes and configurations to meet specific application requirements. They can be tailored to deliver the desired air or gas flow rates, pressures, and purity levels.

It’s important to note that oil-free screw compressors generally have higher initial costs compared to lubricated compressors due to their specialized design and materials. However, they offer benefits such as reduced maintenance, minimized risk of oil contamination, and compliance with stringent industry standards or regulations.

When considering an oil-free screw compressor, it’s crucial to assess the specific application needs, air quality requirements, and operating conditions. Consulting with manufacturers or suppliers can help in selecting the most suitable oil-free screw compressor for a particular industry or process.

In summary, oil-free screw compressors are available and offer a reliable and efficient solution for applications where oil-free compressed air or gas is essential. These compressors are designed with specialized features to ensure dry compression, reliable sealing, effective cooling, and high-quality filtration.

air compressor

Are There Regulations Governing the Use of Screw Compressors in Certain Industries?

Yes, there are regulations governing the use of screw compressors in certain industries. Here’s a detailed explanation:

1. Occupational Safety and Health Administration (OSHA):

In the United States, OSHA sets standards and regulations to ensure the safety and health of workers. While OSHA does not have specific regulations solely focused on screw compressors, they have general requirements that apply to compressed air systems, including screw compressors. These requirements cover aspects such as electrical safety, guarding of moving parts, and proper maintenance practices to ensure worker safety.

2. Environmental Protection Agency (EPA):

The EPA in the United States regulates air emissions to protect the environment and public health. While screw compressors themselves are not directly regulated, if the compressed air is used in processes that emit pollutants, such as in industrial manufacturing, the EPA may have regulations that apply to those specific industries or processes.

3. Industry-Specific Regulations:

Certain industries have specific regulations that govern the use of screw compressors or compressed air systems. These regulations are often aimed at ensuring product quality, safety, and environmental compliance. Some examples include:

a) Food and Beverage Industry: The food and beverage industry often has strict regulations to ensure product safety and prevent contamination. Compressed air used in processes such as packaging, conveying, or powering equipment may need to meet specific quality standards, such as those established by the Food and Drug Administration (FDA) or the Global Food Safety Initiative (GFSI).

b) Pharmaceutical Industry: The pharmaceutical industry has stringent regulations to ensure product quality, safety, and compliance with Good Manufacturing Practices (GMP). Compressed air used in pharmaceutical manufacturing processes must meet specific standards, such as those outlined in the United States Pharmacopeia (USP) or the European Pharmacopoeia (Ph. Eur.).

c) Electronics Industry: The electronics industry often requires clean and dry compressed air to prevent damage to sensitive electronic components. Standards such as ISO 8573, which specify air purity classes for different contaminants in compressed air systems, may be applicable.

d) Automotive Industry: The automotive industry may have regulations and standards related to the use of compressed air in manufacturing processes, such as painting or pneumatic tools. These regulations often focus on worker safety, product quality, and environmental compliance.

It’s important for organizations in these industries to be aware of and comply with the relevant regulations governing the use of screw compressors. Compliance helps ensure the safety of workers, product quality, environmental protection, and overall regulatory compliance.

It’s worth noting that regulations may vary by country and region, so it’s essential to consult the specific regulations applicable to the industry and location where the screw compressors are being used.

air compressor

What Are the Advantages of Using a Screw Compressor?

Using a screw compressor offers several advantages in various applications. Here’s a detailed explanation:

High Efficiency:

Screw compressors are known for their high efficiency in converting electrical power into compressed air or gas. The rotary positive displacement design of screw compressors allows them to deliver a large volume of compressed air or gas with minimal energy loss. This high efficiency results in cost savings and reduced energy consumption compared to other types of compressors.

Continuous Operation:

One of the key advantages of screw compressors is their ability to provide a continuous flow of compressed air or gas. The interlocking helical rotors ensure a smooth and continuous compression process without pulsations. This feature is particularly beneficial in applications that require a steady and reliable source of compressed air, such as in manufacturing plants and industrial processes.

Compact Design:

Screw compressors are known for their compact design, which allows for space-saving installation. They have a relatively small footprint compared to other types of compressors, making them suitable for applications where space is limited. The compact design also facilitates ease of installation and integration into existing systems.

Low Vibration and Noise Levels:

Screw compressors are designed to operate with low vibration levels, resulting in smooth and quiet operation. The interlocking rotors and balanced design help in minimizing vibrations, reducing the need for additional vibration isolation measures. The low noise levels make screw compressors suitable for applications where noise reduction is important, such as in office environments or noise-sensitive industrial settings.

Wide Range of Capacities:

Screw compressors are available in a wide range of capacities, allowing for flexibility in meeting different compressed air or gas requirements. Whether it’s a small-scale application or a large industrial process, there are screw compressors available to match the specific capacity needs. This versatility makes screw compressors suitable for a variety of industries and applications.

Oil-Injected and Oil-Free Options:

Screw compressors are offered in both oil-injected and oil-free variants, providing options to meet different application requirements. Oil-injected screw compressors use lubricating oil for cooling, sealing, and reducing friction between the rotors. They are commonly used in industrial applications where a small amount of oil in the compressed air is acceptable. Oil-free screw compressors, on the other hand, eliminate the need for oil and provide contaminant-free compressed air. They are preferred in industries such as food and beverage, pharmaceuticals, and electronics, where oil-free air is critical.

Overall, using a screw compressor offers advantages such as high efficiency, continuous operation, compact design, low vibration and noise levels, capacity flexibility, and options for oil-injected or oil-free operation. These benefits make screw compressors a popular choice in various industries for a wide range of applications.

China supplier 15kw 20 Bar Variable Speed Laser Cut Screw Air Compressor 20HP   air compressor portableChina supplier 15kw 20 Bar Variable Speed Laser Cut Screw Air Compressor 20HP   air compressor portable
editor by CX 2024-01-09

China wholesaler 250kw Variable Speed Drive High Efficiency Silent Industrial Screw Rotary Oil Free Dry Two Stage Air Compressor air compressor for car

Product Description

      

   Specification(VSD series)
  Model Capacity M3/min Power kw Noise level db Weight KG
3.5~10bar Water Cooling  Air Cooling
OFA1VSD OFA15VSD 1.1-3.3 15 74   930
OFA22VSD 4.5-5.6 22 74   1150
OFA30VSD 4-6.6 30 74   1300
OFW37VSD 5-8.4 37 74   1600
OFW45VSD 6.1-11.1 45 74   1750
OFA2VSD OFA55VSD 7.3-9.4 55 74   1900
OFA75VSD 10.7-12.4 75 74   2630
OFA90VSD 12.7-15.4 90 74   2700
OFA3VSD OFA110VSD 16.0-19.5 110 74    
OFA132VSD 18.8-21.8 132 74   4300
OFA160VSD 24.0-29.6 160 74   4300
OFA4VSD OFA200VSD 12.2-36.6 200 74    
OFA250VSD 14.2-41.8 250 74   6950
OFA275VSD 15.8-47.4 275 74    
OFA315VSD 45.0-52.1 315 74   6950
OFA5VSD OFA355VSD 50.4-57.5 355 74    
OFW1VSD OFW37VSD 2-5.9 37 74    
OFW45VSD 2.3-7 45 74    
OFW2VSD OFW55VSD 4.5-8.8 55 74    
OFW75VSD 4.5-13.2 75 74 2170  
OFW90VSD 4.5-15.5 90 74 2220  
OFW3VSD OFW110VSD 6.4-19.1 110 74    
OFW132VSD 7.7-22.4 132 74 3500  
OFW160VSD 14.5-42.9 160 74 3500  
OFW4VSD OFW200VSD 18-36.1 200 74    
OFW250VSD 19.-38.4 250 74 6400  
OFW275VSD 20.0-41.0 275 74    
OFW315VSD 46.0-50.9 315 74 6650  
OFW5VSD OFW355VSD 50.4-56.3 355 74 6950  
OFW400VSD 55.8-62.1 400 74 7060  
OFW450VSD 63.8-76.5 450 74 8400  
OFW500VSD 73.1-83.9 500 74 8400  
OFW630VSD 89.0-102.9 630 74 9125  
OFW750VSD 101.8-122.8 750 74 9225  

Company Profile

       ZheJiang Napu compressor Technology Co.,LTD was established in 2012  based in ZheJiang ,specializing in oil-free rotary screw air compressors, offering a wide range of products from airends to compressors . 
       With over 10 years experience in oil free screw air compressor. NAPU Compressor is compliant with ISO 8573-1, Class 0 standard and audited by TUV Rheinland and China National Quality Inspection Center of Compressor and Refrigerator.   
        The company is also compliant with ISO 9001:14001 and is CHINAMFG in the domestic market for its quality-driven culture. The oil-free compressors manufactured by the company are used in a variety of sectors including some of our valued clients like CASC-China Aerospace Science Corporation, NORINCO-China North Industries Group, CNNC-China National Nuclear Group, CHANG AN AUTO, SINOPHARM, BYD and CALT and Sino-Chemical etc.
         Continuous improvement in productivity and efficiency is our goal, and we continue to offer an extensive services including our own branded oil-free compressor package as well as after-sales services for other leading brands.

 

Product Features

1. In house designed airend
2. 100% oil free air certified by Germany TUV.
3. Double-layer structure to reduce he noise.
4. Air Cooling and Water cooling are available.
5. VSD control are available.
6.Touch Screen PLC with preset running schedule, more intelligent control.
7.OEM&ODM service are accepted

 

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of oil free air compressors. More than 20 years of experience in air compressor manufacturing.
 
Q2. What’s payment term ?
A: T/T, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
 
Q3. How about your after-sales service ?
A: 1.We can provide customers with installation and commissioning online instructions.
   
Q4. How about your warranty?
A: One year for the whole machine and 5 years for screw air end, except consumable spare parts.
 
Q5. Do you have any certificate ?
A: Yes, we can offer CE ,ISO  and certificate as clients’ demande.
 
 
Q6. How do you control quality ?
A: 1. The raw materials are strictly inspected
    2. Each compressor must pass at least 8 hours of continuous testing before leaving the factory.
  
Q7.How long could your air compressor be used?
A: Usually, more than over 10 years.

After-sales Service: Online Support
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Water Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

air compressor

What Is the Lifespan of a Typical Screw Compressor?

The lifespan of a typical screw compressor can vary depending on several factors, including the quality of the equipment, maintenance practices, operating conditions, and usage patterns. Here’s a detailed explanation:

The lifespan of a screw compressor is typically measured in operating hours, which refers to the cumulative hours the compressor has been in operation. While it’s challenging to provide an exact lifespan, as it can vary significantly, screw compressors are generally designed to have a long service life, often ranging from 20,000 to 100,000 operating hours.

Several factors can influence the lifespan of a screw compressor:

  • 1. Quality of Construction: The quality of construction and materials used in the compressor’s manufacturing plays a crucial role in its lifespan. Compressors built with high-quality components and robust construction tend to have a longer service life compared to those with lower-quality materials.
  • 2. Maintenance Practices: Regular and proper maintenance is essential to extend the lifespan of a screw compressor. Following the manufacturer’s recommended maintenance schedule, including tasks such as oil changes, filter replacements, and inspection of critical components, helps ensure optimal performance and reliability. Neglecting maintenance can lead to premature wear and potential breakdowns.
  • 3. Operating Conditions: The operating conditions in which the compressor operates can impact its lifespan. Factors such as temperature, humidity, and the presence of contaminants in the ambient air can affect the compressor’s performance and longevity. Compressors operated in clean, well-ventilated environments with controlled temperature and humidity conditions tend to have longer lifespans.
  • 4. Load and Usage Patterns: The load and usage patterns of the compressor also influence its lifespan. Compressors operated at or near their maximum capacity for prolonged periods may experience higher wear and tear compared to those operated within their recommended operating range. Compressors subjected to frequent start-stop cycles or continuous operation may have different lifespans based on the stress placed on their components.
  • 5. Maintenance and Repairs: The response to maintenance and repair needs can impact the compressor’s lifespan. Timely addressing of maintenance issues and prompt repairs when faults or malfunctions occur can prevent further damage and help prolong the compressor’s lifespan.
  • 6. Manufacturer and Design: The reputation and expertise of the manufacturer play a role in determining the compressor’s lifespan. Established manufacturers with a track record of producing reliable and durable equipment often design their compressors to have longer lifespans. It’s advisable to choose compressors from reputable manufacturers known for their quality and reliability.

It’s important to note that while a screw compressor may have a designed lifespan, it doesn’t necessarily mean it will fail immediately after reaching that threshold. With proper maintenance and care, compressors can often exceed their expected lifespan. On the other hand, neglecting maintenance or subjecting the compressor to harsh operating conditions can shorten its lifespan.

Regular monitoring of the compressor’s performance, including parameters such as discharge temperature, vibration levels, and energy consumption, can help identify any potential issues and take corrective actions to maintain the compressor’s reliability and extend its lifespan.

In summary, the lifespan of a typical screw compressor can range from 20,000 to 100,000 operating hours, depending on factors such as the quality of construction, maintenance practices, operating conditions, usage patterns, and manufacturer reputation. Adhering to proper maintenance practices, operating the compressor within its recommended parameters, and choosing a reputable manufacturer can help ensure a longer lifespan for the screw compressor.

air compressor

Can Screw Compressors Be Used for Refrigeration?

Yes, screw compressors can be used for refrigeration applications. Here’s a detailed explanation:

Screw compressors are versatile and widely used in various industrial applications, including refrigeration. They are known for their efficiency, reliability, and ability to handle high-capacity refrigeration systems. Screw compressors work by compressing refrigerant gas, increasing its pressure and temperature, and then transferring the heat to the surrounding environment.

Here are some key points regarding the use of screw compressors in refrigeration:

1. Industrial Refrigeration Systems:

Screw compressors are commonly employed in large-scale industrial refrigeration systems, such as those used in cold storage facilities, food processing plants, beverage production, and HVAC systems for commercial buildings. These systems require high cooling capacities and continuous operation, making screw compressors an ideal choice.

2. Positive Displacement Compressors:

Screw compressors belong to the category of positive displacement compressors. They use two interlocking helical rotors (screws) to trap and compress the refrigerant gas. This design ensures a continuous flow of refrigerant and allows for efficient compression over a wide range of operating conditions.

3. Oil-Injected and Oil-Free Types:

Screw compressors can be either oil-injected or oil-free. Oil-injected screw compressors use oil for lubrication and cooling, which helps reduce friction and extend the compressor’s lifespan. In contrast, oil-free screw compressors use specialized coatings and materials to eliminate the need for oil, making them suitable for applications where oil contamination is a concern, such as in the pharmaceutical or food industries.

4. Multi-Stage Compression:

In refrigeration applications, screw compressors are often used in multi-stage configurations to achieve higher pressure ratios and improve overall system efficiency. Multi-stage compression involves compressing the refrigerant gas in multiple stages, typically with intermediate cooling between each stage, to reduce the work required for compression and enhance system performance.

5. Variable Speed Control:

Screw compressors can be equipped with variable speed drives (VSD) that allow for precise control of the compressor’s rotational speed. VSD technology enables the compressor to adjust its capacity according to the refrigeration load, resulting in energy savings and improved system performance.

6. System Integration:

Screw compressors are often integrated into complex refrigeration systems, working in tandem with other components such as condensers, evaporators, expansion valves, and control systems. This integration ensures efficient heat transfer, proper refrigerant flow, and effective temperature control.

It’s important to note that the selection of a screw compressor for refrigeration applications should consider factors such as cooling capacity requirements, operating conditions, refrigerant type, system configuration, and specific industry regulations.

In summary, screw compressors are well-suited for refrigeration applications, especially in industrial settings. Their efficiency, reliability, and capacity make them a popular choice for large-scale refrigeration systems. Whether in cold storage facilities, food processing plants, or HVAC systems, screw compressors play a crucial role in maintaining optimal temperatures and preserving perishable goods.

air compressor

How Does a Screw Compressor Work?

A screw compressor operates based on a unique rotary positive displacement principle. Here’s a detailed explanation:

Working Principle:

A screw compressor consists of two helical rotors, typically referred to as male and female rotors, that rotate in opposite directions within a housing. The rotors have specially designed profiles that interlock with each other, creating a series of compression chambers as they rotate. The compression chambers gradually reduce in volume as the rotors rotate, compressing the air or gas trapped inside.

Suction Process:

The suction process begins when the rotors start rotating. As they rotate, the helical lobes or threads on the rotors create expanding spaces between them. The expanding spaces draw in the air or gas from the inlet port, allowing it to enter the compression chamber. The suction process continues as the rotors rotate, and the expanding spaces move the air or gas towards the discharge side of the compressor.

Compression Process:

As the air or gas enters the compression chamber, it gets trapped between the interlocking lobes or threads of the rotors. As the rotors continue to rotate, the trapped air or gas is carried along the length of the rotors. The volume of the compression chamber gradually decreases as the lobes or threads of the rotors intermesh, compressing the air or gas. The compression process is continuous and smooth as the air or gas moves from the suction side to the discharge side of the compressor.

Discharge Process:

Once the air or gas reaches the discharge end of the compression chamber, it is pushed towards the outlet port. The compressed air or gas is then released from the compressor through the outlet port to be used for various applications.

Oil-Injected and Oil-Free Variants:

Screw compressors are available in both oil-injected and oil-free variants. In oil-injected screw compressors, a small amount of lubricating oil is injected into the compression chamber. The oil provides lubrication, cooling, and sealing between the rotors, reducing friction and minimizing wear. The oil-injected variant is commonly used in industrial applications where a small amount of oil in the compressed air is acceptable.

Oil-free screw compressors, on the other hand, are designed to operate without the need for oil lubrication. These compressors use specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and eliminate the need for oil. Oil-free screw compressors are preferred in applications that require oil-free and contaminant-free compressed air, such as in the food and beverage, pharmaceutical, and electronics industries.

In summary, a screw compressor works by utilizing interlocking helical rotors to compress air or gas. The rotating rotors draw in the air or gas during the suction process, and as they rotate, the trapped air or gas is compressed within the compression chamber. The compressed air or gas is then discharged from the compressor. Screw compressors are available in oil-injected and oil-free variants, catering to different application requirements.

China wholesaler 250kw Variable Speed Drive High Efficiency Silent Industrial Screw Rotary Oil Free Dry Two Stage Air Compressor   air compressor for carChina wholesaler 250kw Variable Speed Drive High Efficiency Silent Industrial Screw Rotary Oil Free Dry Two Stage Air Compressor   air compressor for car
editor by CX 2023-11-03