Product Description
Product Description
HS series compressors are designed in accordance with the subtropical high temperature and high humidity working environment, and the optimized cooling design ensures that the unit can operate normally in a high temperature environment of 46°C.
Product Feature
1. Adhering to the concept of pursuing high-quality products, HS series compressors are designed in accordance with the subtropical high temperature and high humidity working environment, and the optimized cooling design ensures that the unit can operate continuously and normally in a high temperature environment of 46 °C.
2. Adopt the world-renowned CHINAMFG main motor. The protection grade is IP55. The insulation grade is F grade 100.
3. The gas circuit adopts the stainless steel pipe design of the American SAE standard, with low resistance and strong corrosion resistance, which completely eliminates the common problems of oil leakage, air leakage and air leakage under high pressure.
4. The patented synchronous two-stage compression technology is adopted, so that the compression ratio of each stage of the screw host is less than 6, which is lower than that of the ordinary screw air compressor, which ensures the service life of the screw host.
5. Each stage of the screw host has an independent oil cooling system and an automatic water removal system to ensure that the screw host can run stably around the clock.
6. The powerful third-generation e-Control controller has 6 operation monitoring points to comprehensively monitor the working conditions of the main engine, air filter, oil filter, oil separator, cooler and other important components, so that the compressor can run stably.
Specification
| Mode | HSV75A (W)-40 | HSV90A (W)-40 | HSV110A (W)-40 | HSV132A (W)-40 |
| Operating Pressure Bar (g) | 40 | 40 | 40 | 40 |
| Motor speed (kw) | 75 | 90 | 110 | 132 |
| Exhaust volume (m³/min) | 5.5 | 7.2 | 9.0 | 10.0 |
| Cooling method | water cooling | water cooling | water cooling | water cooling |
| Noise dB(A) | 72(75) | 74(78) | 74(78) | 74(78) |
| Length | 2550 | 3150 | 3150 | 3150 |
| Width | 1480 | 1880 | 1880 | 1880 |
| Height | 1850 | 1850 | 1850 | 1850 |
| Mode | HSV75A (W)-35 | HSV110A (W)-30 | HSV55A-25 | HSV90A-25 |
| Operating Pressure Bar(g) | 35 | 30 | 25 | 25 |
| Motor speed (kw) | 75 | 110 | 55 | 90 |
| Exhaust volume (m³/min) | 7.6 | 11.0 | 5.4 | 9.5 |
| Cooling method | air cooling (water cooling ) | air cooling(water cooling ) | 74(78) | air cooling |
| Noise dB(A) | 72(75) | 74(78) | 72(75) | 74(78) |
| Length | 2550 | 3150 | 2550 | 3150 |
| Width | 1480 | 1880 | 1480 | 1880 |
| Height | 1850 | 1850 | 1850 | 1850 |
| Mode | HSV180A-25 | HSV110A (W)-20 | ||
| Operating Pressure Ba(g) | 25 | 20 | ||
| Motor speed (kw) | 180 | 110 | ||
| Exhaust volume (m³/min) | 19.0 | 12.5 | ||
| Cooling method | air cooling(water cooling ) | air cooling(water cooling ) | ||
| Noise dB(A) | 78(82) | 74(78) | ||
| Length | 3980 | 3150 | ||
| Width | 1980 | 1880 | ||
| Height | 1980 | 1850 |
| After-sales Service: | Online |
|---|---|
| Warranty: | 3000hours |
| Lubrication Style: | Lubricated |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
What Is the Noise Level of Screw Compressors?
The noise level of screw compressors can vary depending on several factors, including the compressor’s size, design, operating conditions, and the presence of noise-reducing features. Here’s a detailed explanation:
Screw compressors are known for their relatively low noise levels compared to other types of compressors, such as reciprocating compressors. However, the actual noise level can still vary depending on the specific compressor model and its operating parameters.
The noise level of screw compressors is typically measured in decibels (dB) and can range from around 60 dB to 90 dB or higher. It’s important to note that the noise level is logarithmic, meaning that a small increase in decibel level represents a significant increase in perceived noise intensity.
Several factors can influence the noise level of screw compressors:
- 1. Compressor Size and Design: Larger screw compressors tend to produce higher noise levels compared to smaller ones. This is because larger compressors generally have more powerful motors and larger rotating components, which can generate more noise. The design of the compressor, including the type of rotor profiles and the presence of noise-reducing features, can also impact the noise level.
- 2. Operating Conditions: The operating conditions of the compressor, such as the speed of rotation and the discharge pressure, can affect the noise level. Higher speeds and pressures may result in increased noise production. Additionally, the presence of pulsations or vibrations in the system can contribute to noise generation.
- 3. Sound Insulation and Enclosures: Some screw compressors come with built-in sound insulation or enclosures to reduce noise levels. These features help contain the noise within the compressor unit and minimize the propagation of noise to the surrounding environment. Compressors equipped with sound insulation or enclosures generally have lower noise levels compared to open-frame compressors.
- 4. Installation and Surrounding Environment: The installation of the compressor and the characteristics of the surrounding environment can influence the perceived noise level. Factors such as the proximity of the compressor to sensitive areas, the presence of sound-absorbing materials, and the layout of the facility can impact the noise propagation and overall noise perception.
- 5. Maintenance and Wear: Proper maintenance of the compressor, including regular inspection and lubrication of components, can help minimize noise levels. Wear and tear on the compressor’s internal parts can lead to increased noise production, so timely repairs or component replacements are important to maintain optimal performance and minimize noise.
It’s worth noting that noise levels are typically provided by manufacturers as specifications for each compressor model. These specifications can help users select compressors with noise levels that meet their specific requirements or comply with local noise regulations.
In summary, the noise level of screw compressors can range from around 60 dB to 90 dB or higher, depending on factors such as compressor size, design, operating conditions, and the presence of noise-reducing features. Proper installation, maintenance, and the use of sound insulation or enclosures can help minimize noise levels and create a more comfortable and quieter operating environment.
.webp)
What Is the Role of Control Systems in Screw Compressor Operation?
Control systems play a crucial role in the operation of screw compressors. Here’s a detailed explanation:
Screw compressors are complex machines that require precise control and monitoring for optimal performance and efficiency. Control systems provide the necessary intelligence and automation to regulate various aspects of screw compressor operation. Here are the key roles of control systems:
1. Start-up and Shutdown Control:
Control systems manage the start-up and shutdown sequences of screw compressors. During start-up, the control system ensures a gradual ramp-up of motor speed and system pressure to prevent sudden surges and excessive wear on components. During shutdown, it safely brings the compressor to a stop and performs necessary cooling and ventilation processes.
2. Load and Unload Control:
Screw compressors often feature load and unload operation to match compressed air supply with demand. The control system monitors system pressure, flow requirements, and other parameters to determine when to load or unload the compressor. It engages or disengages the compressor’s capacity control mechanism, such as inlet modulation valves or variable-speed drives, to maintain optimal operation at varying loads.
3. Pressure Control:
Control systems regulate the discharge pressure of screw compressors. They continuously monitor the system pressure and adjust compressor operation to maintain the desired pressure setpoint. The control system modulates the compressor’s capacity, adjusts the speed of the drive motor, or controls the opening and closing of inlet or discharge valves to achieve the target pressure.
4. Temperature Control:
Control systems monitor and control various temperature parameters within the screw compressor system. They ensure that the compressor operates within safe temperature limits by monitoring coolant temperatures, lubricant temperatures, and interstage or discharge temperatures. If temperature limits are exceeded, the control system may activate cooling mechanisms, adjust operating parameters, or trigger alarms and shutdowns to prevent damage.
5. Monitoring and Protection:
Control systems provide comprehensive monitoring and protection functions for screw compressors. They continuously collect data from various sensors and instruments, such as pressure sensors, temperature sensors, vibration sensors, and current sensors. The control system analyzes this data to detect abnormalities, malfunctions, or potential failures. It can initiate alarms, shutdowns, or safety interlocks to protect the compressor and associated equipment.
6. Energy Management:
Control systems optimize energy efficiency in screw compressor operation. They analyze system demand, performance characteristics, and energy consumption to make intelligent decisions regarding load modulation, capacity control, and motor speed adjustments. By optimizing the compressor’s operation, the control system helps reduce energy consumption, operating costs, and environmental impact.
7. Remote Monitoring and Control:
Modern control systems often offer remote monitoring and control capabilities. They can be integrated into supervisory control and data acquisition (SCADA) systems or connected to networked platforms. Remote access allows operators to monitor compressor performance, adjust operating parameters, receive alarms, and perform diagnostics from a central control room or via mobile devices.
In summary, control systems play a vital role in the operation of screw compressors by providing intelligent control, monitoring, and protection. They manage start-up and shutdown sequences, regulate load and unload operation, control pressure and temperature, monitor system parameters, optimize energy efficiency, and enable remote monitoring and control. By effectively managing the compressor’s operation, control systems contribute to reliable performance, energy efficiency, and overall system optimization.
.webp)
How Do Screw Compressors Compare to Piston Compressors?
Screw compressors and piston compressors are two common types of compressors used for various applications. Here’s a detailed comparison between these two types:
1. Working Principle:
Screw Compressors: Screw compressors use intermeshing rotors (usually a male and female rotor) to compress air or gas. The rotors rotate in opposite directions, creating compression chambers that gradually reduce in volume, compressing the air or gas. Piston Compressors: Piston compressors, also known as reciprocating compressors, use a piston and cylinder arrangement to compress air or gas. The piston moves back and forth within the cylinder, creating compression by reducing the volume of the chamber.
2. Continuous vs. Intermittent Compression:
Screw Compressors: Screw compressors provide continuous compression, which means they can deliver a steady flow of compressed air or gas without pulsations. The compression process is smooth and continuous, resulting in less vibration and noise. Piston Compressors: Piston compressors provide intermittent compression due to the reciprocating motion of the piston. The compression process is characterized by pulsations, resulting in pressure fluctuations and higher vibration levels compared to screw compressors.
3. Efficiency:
Screw Compressors: Screw compressors are known for their relatively high efficiency. They can achieve higher isothermal and adiabatic efficiency compared to piston compressors. The smooth and continuous compression process in screw compressors minimizes energy losses and heat generation, resulting in improved efficiency. Piston Compressors: Piston compressors have lower overall efficiency compared to screw compressors. The reciprocating motion of the piston leads to energy losses due to friction, heat generation, and pressure pulsations. These factors can reduce the efficiency of piston compressors, especially at higher compression ratios.
4. Size and Portability:
Screw Compressors: Screw compressors are generally more compact and require less space compared to piston compressors of similar capacity. They have a simpler design with fewer moving parts, making them relatively lightweight and easier to install. Screw compressors are often mounted on a skid or integrated into compact packages, offering convenient portability. Piston Compressors: Piston compressors are typically larger and bulkier compared to screw compressors of similar capacity. They have more complex designs with multiple moving parts, including pistons, connecting rods, and valves. The larger size and weight of piston compressors make them less portable and require more installation space.
5. Maintenance and Service:
Screw Compressors: Screw compressors generally require less maintenance compared to piston compressors. They have fewer moving parts, reducing the chances of wear and tear. Screw compressors often have longer service intervals and lower maintenance costs. However, proper lubrication and regular inspections are still necessary to ensure optimal performance and efficiency. Piston Compressors: Piston compressors require regular maintenance due to the higher number of moving parts. Components such as pistons, rings, valves, and bearings may require more frequent inspections, lubrication, and replacements. Maintenance costs and service intervals for piston compressors are typically higher compared to screw compressors.
6. Noise and Vibration:
Screw Compressors: Screw compressors operate with lower noise and vibration levels compared to piston compressors. The continuous and smooth compression process in screw compressors results in reduced vibrations and quieter operation, making them suitable for noise-sensitive environments. Piston Compressors: Piston compressors can generate higher noise levels and vibrations due to the reciprocating motion of the piston and the pulsations during compression. Additional measures, such as sound insulation and vibration dampening, may be required to minimize noise and vibration in piston compressors.
Both screw compressors and piston compressors have their advantages and disadvantages depending on specific application requirements. Screw compressors are favored in applications that demand continuous and efficient compression with minimal pulsations and lower noise levels. Piston compressors are suitable for applications that require intermittent compression, lower initial investment, and simplicity. Factors such as desired flow rate, pressure range, operating conditions, and cost considerations play a crucial role in selecting the appropriate compressor type for a given application.
editor by CX 2023-10-11